Introduction

Welcome to your ResMed Mobi portable oxygen concentrator. This guide will help you set up and start using your device quickly.

Prescription Only Device

Setup Steps

1. Place the ResMed Mobi portable oxygen concentrator unit into its designated carrying bag.

   Visual: The portable oxygen concentrator unit is shown being placed inside an open carrying bag.

2. Connect the AC power cord to the power input port on the Mobi unit.

   Visual: A hand is shown plugging the AC power cord into the side of the Mobi unit.

3. Connect the battery to the Mobi unit.

   Visual: A hand is shown connecting a battery pack to the rear of the Mobi unit.

4. Securely insert the battery into the Mobi unit.

   Visual: A hand is shown pushing the connected battery into place on the Mobi unit until it clicks.

5. Connect the oxygen tubing to the oxygen outlet port on the Mobi unit.

   Visual: A hand is shown attaching the oxygen tubing connector to the Mobi unit's outlet.

6. Connect the nasal cannula to the other end of the oxygen tubing.

   Visual: A hand is shown connecting the nasal cannula to the end of the oxygen tubing.

7. Turn on the device. The display will show the current settings, for example, 'Running Setting 2 Active Mode'.

   Visual: The Mobi unit's display screen shows 'Running Setting 2 Active Mode'. A person is shown wearing the nasal cannula, indicating use.

Manufacturer and Legal Information

Manufacturer: ResMed Asia Pte. Ltd.

8 Loyang Crescent, #05-01 Singapore 509016

Mobi is a trademark and/or registered trademark of the ResMed family of companies.

For patent and other intellectual property information, please visit ResMed.com/ip.

© 2018 ResMed Ltd. Document Number: 358017/1. Publication Date: 2018-06.

For more information, visit ResMed.com.