Panacom SP-3050 Portable Speaker User's Guide
Thank you for purchasing the SP-3050 Panacom's Portable Speaker. Please read the manual carefully before operating.
Product Features
- Ultra-low distortion amplifying circuit
- Digital karaoke, treble and bass independent adjustment
- Professional treble and bass gain controlling circuit
- Compatible with DVDNCD/PC and other sound sources
- Unique acoustic appearance design
- Built-in MP3 encoding supporting U disk
- Built-in battery for outdoor activities
- Suitable for adaptor and charging
- Built-in professional wireless microphone system
- Intelligent power switch charging circuit
- Professional high-effective loud-speaking unit
Attention
The product has a built-in battery, making it suitable for outdoor singing, advertisements, recreation, and other activities. Please charge the battery before using it outdoors to ensure longer usage time. The machine has a power switch circuit. When you connect the adaptor and plug it into the charging interface, the machine will automatically switch to the adaptor's power supply and charge the built-in battery. When the adaptor is disconnected, the machine will intelligently switch to the built-in battery for continuous operation. When the adaptor is used for charging, the integrated intelligent charging circuit will indicate charging status with a light. Once charging is complete, the intelligent charging circuit will indicate a full charge, and the charging indicator lamp will light up. You can then disconnect the AC power of the adaptor. If the adaptor remains connected while the machine is in use, the charging circuit will automatically cut off to prevent overcharging. Please note that the battery has a limited service life and is not covered by the company's warranty. Under normal circumstances, the built-in battery requires 8-10 hours of charging. With more charging cycles, the battery's capacity may change, and the full charging time may reduce accordingly. If the battery drains quickly after a short period of use, the built-in battery may need replacement. If the battery charge reduces significantly during outdoor use, please turn off the power switch on the rear plate and charge the built-in battery within 24 hours. If the battery is completely depleted, it may become unchargeable, and its service life may expire. If the machine is not used for an extended period, please charge the battery every six months to prevent battery invalidity.
Instruction of U Disk MP3 Encoding Playing
To use the built-in MP3 encoding function, first format your USB disk (referred to as U disk) to FAT32 format on your computer. Then, copy your MP3 files to the U disk. When reading the U disk, the encoding system will play files according to the sequence in which they were copied. Therefore, the first song copied to the U disk will be played first, or vice versa. To play songs in a specific order, arrange the copying sequence accordingly. If files copied to the U disk cannot be played, verify that the file format is MP3. If not, convert the files to MP3 format on your computer before copying them to the U disk. When copying MP3 files, ensure they are placed in the root directory of the U disk. It is recommended to delete all unnecessary files and directories to reduce the occurrence of reading errors during playback. When purchasing a U disk, select one with good quality and internal encoding that supports capacities such as 64MB, 128MB, 256MB, 512MB, 1GB, 2GB, 4GB, or 8GB. During playback, keep the U disk away from high temperatures, strong magnetic fields, and high-frequency interference. If the device crashes, turn off the power and restart it for recovery.
Panel/Rear Plate/MP3 Function and Operation
The diagram shows the front panel of the SP-3050 Portable Speaker with numbered controls:
- 1. Slot: Insert TF card / USB
- 2. Mic: Microphone plug
- 3. Light: Battery charging indicator light
- 4. Power switch: Power on or off
- 5. Tone: Adjust tone volume
- 6. Mic. vol: Adjust microphone volume and aux mic-in volume
- 7. Volume: Adjust the main volume
- 8. Aux mic in: Connect a 3.5mm output plug from a music player
- 9. Power jack: Connect the adaptor
- 10. Light: Light is on when power is on; light is off when power is off
- 11. Cycle: Repeat to play the same music
- 12. Next: Play the next song
- 13. Play/pause: Play music and pause the music
- 14. Previous: Play the previous song
- 15. Mode: Change function mode - Line in / Wireless / TF / USB
Common Simple Faults and Guidance for Operation and Repair
Fault Phenomenon | Simple Fault Analysis | Solution |
---|---|---|
Failing to electrify | The power switch is not opened. | Open the power switch. |
The electricity quantity of the built-in battery is totally consumed. | Use the power adaptor to charge the battery. | |
No sound | Failing to input sound source. | Change the sound source. |
Failing to establish signal line. | Reconnect the signal line. | |
Main volume is switched to minimum; U disk playing has no sound. | Properly adjust the volume knob. | |
Faults with external signal source. | Inspect the U disk or audio switch. | |
Poor contact or damage of external signal line. | Change the sound source. Readjust or change the signal line. | |
External microphone has no sound | External microphone is not fully inserted in the jack. | Totally insert the microphone into the jack. |
The external microphone switch is not opened. | Open the switch of the wireless microphone. | |
The volume knob of the microphone is off. | Properly adjust the volume knob of the microphone. | |
Problems with wireless microphone | The switch of the wireless microphone is not opened. | Open the switch of the wireless microphone. |
The wireless microphone is not inserted in the battery. | Insert the electrical apparatus into the battery box of the wireless microphone. | |
The sound of the wireless microphone is distorted. | Change the battery of the wireless microphone. |
If the problem persists after inspection, please contact the nearest local maintenance department.
Technical Services / Servicio Técnico
The document lists various technical service providers across different provinces in Argentina, including their company name, locality, address, and phone number. This information is provided for users seeking technical support for Panacom products.
International Warranty / Garantía Internacional
Terms and Conditions:
- PANACOM warrants the operation of this product to be free from any manufacturing and/or material defect for a period of 6 months from the date of purchase by the user.
- This warranty is limited to the repair and/or replacement of this product, at PANACOM's discretion, free of charge within the stipulated term. It does not extend to consequential or incidental damages to other products that may be used with this unit.
- The warranty shall be voided in the following cases: a) repair or attempt to repair by third parties not authorized by the company. b) in case of performing any type of modification to connection cables, plugs, connectors, or other adapters different from the original ones provided by the company.
- To make this warranty effective, you shall contact the Authorized Service Center of your country. Information is available at www.panacom.com. To initiate the warranty procedure, you must present the Original Purchase Invoice, which clearly states the purchase date, dealer name, and product identification.
- Transportation, freight, stay, and/or insurance expenses, if any, are not covered by this warranty.
To ask for technical support for this product in Argentina, call 0810-888-7262.
Términos y Condiciones (Spanish):
- PANACOM guarantees the product's operation against any manufacturing or material defect for a period of 6 months from the date of purchase by the user.
- This warranty is limited to the repair and/or replacement of this product, at PANACOM's discretion, free of charge within the validity period. It does not cover consequential or incidental damages to other products used with this unit.
- The warranty is voided in the following cases: a) repair or attempted repair by unauthorized third parties. b) any modification to connection cables, plugs, connectors, or adapters other than the original ones provided by the company.
- To claim this warranty, you must submit it to the authorized service center in your country, which will manage it. This information is available at www.panacom.com. To process this warranty, you must present the original purchase invoice, clearly stating the purchase date, store name, and product identification.
- Expenses for transportation, freight, lodging, and/or insurance, if any, are not covered by this warranty.
To consult our technical service network, please call 0810-888-7262.