Panacom SP-1820 Twin Twister Speaker System User Manual

Remote Control

This section details the functions of the remote control for the Panacom Twin Twister Speaker System.

Remote Control Functions:

• 1. MUTE: Silences audio output.
• 2. MENU: Accesses menu options.
• 3. NUMBER BUTTON: For direct input or selection.
• 4. VOLUME+: Increases volume.
• 5. AUTO: Automatic function selection.
• 6. PLAY/PAUSE: Starts or pauses playback.
• 7. TUNING- [Previous]: Decreases tuning frequency or selects previous track.
• 8. VOLUME-: Decreases volume.
• 9. X Drive: Activates/deactivates X-Bass effect.
• 10. Light mode: Cycles through lighting modes (OFF, R, G, B, RG, RB, GB, RGB, AUTO, DEMO).
• 11. TUNING+ [Next]: Increases tuning frequency or selects next track.
• 12. DISCONNECT: Disconnects Bluetooth connection.
• 13. CHANNEL+ [Next]: Moves to the next channel or track.
• 14. CHANNEL- [Previous]: Moves to the previous channel or track.
• 15. MENU ADJUST: Adjusts menu settings.
• 16. INPUT: Selects input source (AM/FM, AUX, LINE IN, USB, BT).

Using the Remote Control

Use the remote control within 6 meters of the unit, pointing towards the remote control sensor.

Notes on Remote Control Care:

• Do not spill liquid on the remote control.
• Do not drop the remote control.
• Avoid placing the remote control in hot, humid, extremely cold, or dusty places.

Front Panel

Description of the controls located on the front panel of the speaker system.

• 1. LED DISPLAY: Shows status and information.
• 2. PLAY/PAUSE: Press to play or pause audio.
• 3. TUNING-/PREV [Previous]: Press to select the previous track or tuning frequency.
• 4. TUNING+/NEXT [Next]: Press to select the next track or tuning frequency.
• 5. VOLUME/MULTI: Used to adjust the volume or change settings in the AUDIO/LIGHT menus.
• 6. USB: USB terminal. Important: The USB port is intended only for data transfer. Other devices cannot be used with this USB connection. The use of USB extension cords is not recommended.
• 7. MICROPHONE 1: Terminal for Microphone 1.
• 8. MICROPHONE 2: Terminal for Microphone 2.
• 9. X DRIVE: Activates the X-Bass effect.
• 10. INPUT: Press this key to select a different input mode.
• 11. AUDIO/LIGHT: This switch selects the AUDIO/LIGHT menu.

Rear Panel

Description of the connections available on the rear panel.

• 1. LINE IN: Line in audio input jacks (LINE.L, LINE.R).
• 2. AUX IN: Auxiliary audio input jacks (AUX.L, AUX.R).
• 3. FM ANTENNA: FM antenna input jack.
• 4. FRONT SPEAKERS: Connect to the other speakers.
• 5. POWER: Switch to turn the unit on or off.
• 6. AC INPUT: Power input connection (220Vca 50Hz).

Connections

Connection Instructions (Example):

1. Please switch off power when doing connection.
2. All inputs should be inserted firmly to avoid noise distortion.

The diagram illustrates how to connect the speaker system to an amplifier and a TV. It also provides wire color codes for connections:

• BK: black (analog signal ground)
• OG: orange (speaker+)
• WH: white (digital signal ground)
• BL: blue
• GN: green
• RD: red

Operation

Normal Function

1. Rotate the VOLUME/MULTI knob on the front panel or press the VOL +/- button on the remote control to adjust the volume.
2. Press the INPUT key on the front panel or the INPUT key on the remote control to select AM/FM, AUX, LINE IN, USB, BT mode.
3. Press [Previous] or [Next] on the front panel or remote control to select previous or next track/station.
4. Press the AUDIO/LIGHT key on the front panel or the MENU key on the remote, then adjust the VOLUME/MULTI or MENU ADJUST +/- key on the remote control to adjust music treble/bass and MIC effect.
5. Press the LIGHT button on the remote control to change the light mode (OFF, R, G, B, RG, RB, GB, RGB, AUTO, DEMO).
6. Press the MUTE key on the remote control to mute; press it again to reset.
7. Press X Drive on the remote to turn the X-Bass effect on/off.

Tuner Function

1. Before using the tuner function, attach the supplied antenna and adjust it for optimal reception.
2. Press the INPUT key on the front panel or remote to select the TUNER function. The frequency is shown on the LED display.
3. Press or hold the TU- [Tuning Down] / TU+ [Tuning Up] keys on the remote control or front panel for automatic tuning. For manual tuning of weaker stations, press the TU-/TU+ keys repeatedly for small frequency increments.
4. Press the NEXT/PREV buttons to select pre-stored stations.

Karaoke Function

1. The unit can automatically detect a microphone and display "mic in". Please turn off the microphone volume and adjust the volume gradually after inserting the microphone.
2. Press AUDIO/LIGHT on the front panel or MENU on the remote control to display MV (MIC volume), then press +/- or rotate the VOLUME knob to change the MIC volume.
3. Press AUDIO/LIGHT on the front panel or remote control to display EC (MIC echo), then press +/- or rotate the VOLUME knob to change the MIC echo effect.

USB Application

1. Press the INPUT key on the front panel or the INPUT key on the remote control to select USB mode.
2. Press [Previous]/TU- or [Next]/TU+ on the front panel or press [Previous] or [Next] on the remote to select forward or previous songs. Press [Play/Pause] to play or pause.

Note: Supported music files: MP3, WMA. Max USB size: 32G.

NFC Function

For smartphones with NFC (Near Field Communication), you can easily perform the pairing operation by touching the NFC mark on this unit with your smartphone. Ensure the unit and the connecting device's NFC function are turned on beforehand.

1. Press the [Power] button to turn on the unit.
2. Perform the pairing operation on the connecting device (refer to the connecting device's manual for details).

If the connection fails, move the smartphone slowly over the NFC mark. If the smartphone is equipped with a case, remove the case.

What is NFC?

Near Field Communication (NFC) is a standards-based connectivity technology that makes it more convenient to make transactions, exchange digital content, and connect devices. Using NFC, you can transfer information between your phone and other NFC devices, such as phones, mobile devices, payment devices, and home audio and video devices. For example, you can share web addresses, contacts, phone numbers, music tracks, videos, or photos. NFC is activated by bringing two NFC devices together. The maximum reading distance is about one centimeter, which helps prevent unauthorized communications.

Bluetooth Pair & Connection

• Turn off any Bluetooth devices previously paired (linked) with this unit.
• Turn on the Bluetooth features on your phone or music player.
• Turn on and set this unit in the Bluetooth mode. The flashing BT light indicates pairing mode.
• Set your phone or music player to search for Bluetooth devices.
• Select "PANACOM SP1820" from the search results on your phone or music player.
• Select "Accept" or "Yes" to pair this unit with your phone or music player.
• If protected, enter "0000" for the passkey. A steady BT light indicates a successful connection.
• Press the DISCONNECT key on the remote to disconnect the Bluetooth.

Accessories

• Remote control - 1 pc
• AM/FM antenna - 1 set
• Instruction Manual - 1 pc

Specifications

Technical Services

Contact information for authorized service centers across various provinces in Argentina.

International Warranty

Terms and Conditions:

1. PANACOM warrants the operation of this product to be free from any manufacturing and/or material defect for a period of 6 months from the date of purchase by the user.
2. This warranty is limited to the repair and/or replacement of this product, according to PANACOM's criterion, free of charge within the stipulated term and it does not extend to consequential or incidental damages to other products that may be used with this unit.
3. The warranty shall be voided in the following cases: a) repair or attempt to repair by third parties not authorized by the company. b) in case of performing any type of cut in connection cables, plugs, connectors, or other adapters different from the original ones provided by the company.
4. To make this warranty effective, you shall contact the Authorized Service Center of your country and they shall carry out the pertinent procedure; said information is available at www.panacom.com. In order to start the necessary procedure to get said warranty, you shall hand in the Original Purchase Invoice where the purchase date, dealer name and product identification shall be stated clearly.
5. Transportation, freight, stay and/or insurance expenses, if any, are not covered by this warranty.

To ask for technical support of this product in Argentina, call 0810-888-7262.