User's Guide
Thank you for purchasing the SP-3110CM Panacom's Portable Speaker. Please read this manual carefully before operating.
Product Features
- LED lights effects
- USB/TF card support
- Wireless Bluetooth (BT) connection
- 1 Microphone input jack
- 12" Subwoofer Unit
- 3.5" Tweeter Unit
- AUX input
- Wired microphone included
- Rechargeable battery
- 20W RMS power
- 1800mAH Lithium battery
Attention & Charging
This product is equipped with a battery, making it suitable for outdoor activities like singing, advertisements, and recreation. Ensure the battery is charged before outdoor use for extended operation. The machine features an intelligent charging circuit. When an adapter is connected, the unit automatically switches to adapter power and charges the built-in battery. If the adapter is disconnected, it switches to battery power. The charging indicator lamp will light during charging and indicate a full charge. The battery has a limited service life. Under normal circumstances, the built-in battery requires 8-10 hours for a full charge. Frequent charging may reduce full charge time. If the battery drains quickly, it may need replacement. If the battery level is low during outdoor use, switch off the unit and charge it within 24 hours. If the battery is completely depleted, it may become unchargeable and its service life will expire. For long-term storage, charge the battery every six months to prevent invalidity.
MP3 Function & Operation
To use the built-in MP3 encoding function, format your USB drive (U disk) to FAT32 on a computer first. Then, copy MP3 files onto the U disk. The system plays files according to their sequence on the U disk. For specific playback order, arrange the copying sequence accordingly. If files are not playable, ensure they are in MP3 format. Copy MP3 files into the root directory of the U disk. It is recommended to delete unnecessary files and directories to minimize reading errors. Choose high-quality U disks with internal encoding supporting various capacities (e.g., 64MB to 8GB).
Important: During playback, keep the device away from high temperatures, strong magnetic fields, and high-frequency interference. In case of a crash, turn off the power and restart.
Controls and Inputs
Volume: Adjusts the overall sound volume.
TREBLE: Adjusts the gain of music treble.
BASS: Adjusts the gain of music bass.
EQ (Equalizer): Adjusts the music frequency curve and gain/attenuation.
MIC. VOL: Adjusts the microphone volume.
MIC. TREBLE: Adjusts the gain of microphone treble.
MIC. BASS: Adjusts the gain of microphone bass.
ECHO: Adjusts the echo depth of the microphone.
DELAY: Adjusts the microphone echo delay effect.
MIC1/MIC2: Connect wired microphones.
GT 1/GT2: Connect guitar audio input.
GUITAR VOLUME: Adjusts the volume for the guitar input.
DC FUSE: Protects the unit with a 10A/250V fuse.
POWER: Main power switch for the amplifier. It does not control battery charging when an adapter is connected.
DC12V IN: Connects the external power adapter (use the original adapter).
CHARGING Indicator: Shows battery charging status (red for charging, green for full).
WIRELESS MIC ANT: Built-in antenna for wireless microphones; position vertically for best reception.
12V BATTERY IN: External 12V battery interface. Ensure correct polarity and use a connection line of at least 0.75 sq. meters.
LINE IN: External audio input for compatible devices like computers or DVCs.
MP3 Player Display: Shows track, playback time, or receiving rate.
USB Interface: For connecting U disks with MP3 files.
SD/MMC CARD Interface: For connecting SD or MMC cards with MP3 files.
Playback Controls:
- Play/Pause (►||): Toggles between playing and pausing music.
- Stop (■): Stops playback. Recommended to stop and change U disk if needed.
- MP3/LINE-MODE: Switches audio source between external audio and built-in MP3 player.
- VOL- (K): Selects the previous song. Holding for over 3 seconds decreases volume.
- VOL+ (►►►): Selects the next song. Holding for over 3 seconds increases volume.
- REPEAT: Repeats single songs or all songs.
Troubleshooting
Common Faults and Solutions
| Fault Phenomenon | Simple Fault Analysis | Troubleshooting Solution |
|---|---|---|
| Failing to electrify | Power switch not opened; Built-in battery fully consumed. | Open power switch; Use power adapter to charge the battery. |
| No sound | No sound source input; Signal line not established; Main volume set to minimum; U disk playback has no sound; Faults with external signal source; Poor contact or damage to external signal line. | Change signal source; Reconnect signal line; Adjust volume knob; Inspect U disk or audio switch; Change signal source; Readjust or change signal line. |
| External microphone has no sound | External microphone not fully inserted; External microphone switch not opened; Microphone volume knob is off. | Fully insert microphone into the jack; Open the wireless microphone switch; Adjust microphone volume knob. |
| Wireless microphone issues | Wireless microphone switch not opened; Wireless microphone not inserted correctly; Wireless microphone sound distortion. | Open the wireless microphone switch; Insert the wireless microphone correctly; Change the wireless microphone battery. |
Back Panel Description
1. Display: Shows playback information.
2. Volume control: Adjusts the main volume.
3. Power ON/OFF: Main power switch for the unit.
4. LED: Controls the power on/off of the front LED light.
5. Battery DC IN: Connects the DC power source for charging.
6. MIC. IN / GUITAR. IN: Jacks for connecting microphones and guitars.
7. MODE: Switches between Line-in and Bluetooth (BT) modes.
8. Chapter Button (K): Selects the previous track.
9. Play Button (►||): Plays or pauses the music.
10. Chapter Button (►►►): Selects the next track.
11. REC Button: Recording function.
12. USB: Interface for reading music from a USB drive.
13. TF: Interface for reading music from a TF (microSD) card.
14. LINE IN: External audio input connection.
15. EQ: Electronic equalizer function.
16. Echo Volume: Adjusts the volume for the echo effect.
17. Mic. Volume: Adjusts the microphone volume.
18. DCIN: DC input for connecting the adapter to charge the unit.
International Warranty
Terms and Conditions:
- Panacom warrants this product against manufacturing and material defects for 6 months from the purchase date.
- This warranty covers repair or replacement at Panacom's discretion, free of charge, within the warranty period. It does not cover consequential or incidental damages to other products used with this unit.
- The warranty is void if: a) the product is repaired or attempted to be repaired by unauthorized third parties, or b) connection cables, plugs, connectors, or adapters are cut or modified from their original state.
- To claim warranty service, contact an Authorized Service Center in your country. Information is available at www.panacom.com. You must present the original purchase invoice with the purchase date, dealer name, and product identification.
- Transportation, freight, stay, and insurance expenses are not covered by this warranty.
For technical support in Argentina, call 0810-888-7262.
Panacom also provides technical service centers across various provinces in Argentina. For specific contact information, please refer to the official Panacom website.
