SOUNDPEATS Space Pro

PeatsAudio App Download

To get the most out of your headphones, download the PeatsAudio app from your phone's app store.

First Time Use

Power on: Press and hold the power button for three seconds. You will hear a "Power on" prompt sound, and the indicator light will stay blue for one second.

Power off: Press and hold the power button for three seconds. You will hear a "Power off" prompt sound, and the indicator light will flash red for one second before turning off.

Bluetooth Pairing and Reset Operation

When the headphones are off, press and hold the power button for five seconds to enter pairing mode. You will hear a "Pairing" voice prompt, and the indicator light will alternate between red and blue. The headphones are now discoverable by other devices.

After the first connection, the headphones will automatically reconnect to the last connected device when powered on.

Change connection device or force pairing: Press and hold the volume (+) or (-) buttons for five seconds. The indicator light will flash blue quickly for two seconds, and the earphones will forcibly disconnect from the connected device and re-enter pairing state. To reconnect to the original device, you need to manually reconnect (the pairing list is not cleared).

Reset: When powered on and not in an active call, press and hold the (+) and (-) buttons for 10 seconds until the indicator light flashes red quickly for two seconds. The reset is successful.

Controls

The headphones feature controls on both the left (L) and right (R) earcups.

Right Earcup Controls:

• Power Button: Press and hold for 3 seconds to turn on/off. Press and hold for 5 seconds (when off) to enter pairing mode.
• USB-C Port: For charging.

Left Earcup Controls:

• Volume Up (+): Single press to increase volume. Hold for 5 seconds (with Volume Down) to change device/force pairing.
• Volume Down (-): Single press to decrease volume. Hold for 5 seconds (with Volume Up) to change device/force pairing.
• ANC Button: Single press to cycle through ANC modes (Transparent, Noise Cancellation, Normal).

Button Action Summary:

• 1x Press: Volume Up/Down, ANC Mode Switch.
• 2x Press: Not specified in diagrams for primary functions, but implied for some controls.
• 3x Press: Not specified for primary functions.
• 1.5s Hold: Not specified for primary functions.
• 3s Hold: Power On/Off, ANC toggle with AUX.
• 5s Hold: Pairing Mode, Change Device/Force Pairing.
• 10s Hold: Reset (with Volume +/- buttons).

USB Audio Mode: Can be activated via specific button presses as shown in diagrams.

Diagram Description: Detailed diagrams illustrate the placement of buttons and ports on the left and right earcups, including icons for single press (1x), double press (2x), triple press (3x), 1.5s hold, 3s hold, 5s hold, and the ANC function. A separate diagram shows the USB Audio Mode activation.

ANC Mode

To switch between Transparent mode, Noise Cancellation mode, and Normal mode, press the ANC button once. The modes will cycle.

When powered off, insert the AUX cable and press and hold the ANC button for three seconds to toggle noise cancellation on or off.

Notes:

• If the AUX cable is inserted and then removed while the device is powered on, it will automatically reconnect to Bluetooth. If reconnection fails within five minutes, the device will power off automatically.
• LDAC cannot work simultaneously with Movie mode.
• In AUX mode, noise cancellation can be turned on or off. Transparent mode is not supported.

Dual Device Connection

To use dual device connection, you need the PeatsAudio app and the Dual Device Connection option enabled within the app.

To connect the headphones to two devices: first, pair with Device A. Once paired, turn off Bluetooth on Device A. Repeat the pairing process to connect with Device B, keeping the connection with Device B active. Finally, turn on Bluetooth on Device A.

Notes:

• After the first dual device connection is completed, subsequent connections can automatically reconnect.
• Dual device connection cannot be used simultaneously with LDAC.

Charging

The red indicator light turns on while charging. When fully charged, the red light turns off.

Specifications

Warranty Conditions

A new product purchased from the Alza.cz sales network is guaranteed for 2 years. For repair or other services during the warranty period, contact the product seller directly and provide the original proof of purchase with the date of purchase.

The following are considered conflicts with warranty conditions, for which claims may not be recognized:

• Using the product for a purpose other than intended or failing to follow maintenance, operation, and service instructions.
• Damage due to natural disaster, intervention by an unauthorized person, or mechanical damage caused by the buyer (e.g., during transport, improper cleaning).
• Natural wear and aging of consumables or components during use (e.g., batteries).
• Exposure to adverse external influences such as sunlight, other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge (including lightning), faulty supply or input voltage and incorrect polarity, chemical processes, or used power supplies.
• Modifications, alterations, or adaptations made by anyone to change or extend product functions compared to the purchased design, or the use of non-original components.

EU Declaration of Conformity

This equipment complies with the essential requirements and other relevant provisions of Directive 2014/53/EU and Directive 2011/65/EU (EU) 2015/863.

WEEE: This product must not be disposed of as normal household waste according to the EU Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19/EU). Instead, it must be returned to the place of purchase or handed over to a public collection point for recyclable waste. Proper disposal helps prevent potential negative consequences for the environment and human health. Contact your local authority or the nearest collection point for details. Improper disposal may result in fines according to national regulations.

Symbol Description: The WEEE symbol, depicting a crossed-out wheeled bin, indicates proper disposal procedures. The CE mark indicates compliance with EU standards.