Introduction
Welcome to the SOUNDPEATS A6 Hybrid Noise Cancelling Wireless Headphones. These headphones are designed to deliver immersive audio with advanced noise cancellation technology, providing a superior listening experience for music, calls, and entertainment.
Key Features
- Hybrid Active Noise Cancellation (ANC) for effective reduction of ambient noise.
- High-fidelity audio drivers for clear and balanced sound.
- Bluetooth 5.2 connectivity for stable and efficient wireless pairing.
- Long battery life, offering extended playback time on a single charge.
- Comfortable, ergonomic design for extended wear.
- Integrated microphone for clear hands-free calls.
Getting Started: Pairing
To connect your SOUNDPEATS A6 headphones to a device via Bluetooth:
- Ensure the headphones are charged.
- Turn on the headphones by pressing and holding the power button for approximately 3 seconds. The LED indicator will flash.
- Enter pairing mode: With the headphones off, press and hold the power button for about 5-7 seconds until the LED indicator flashes red and blue alternately.
- On your device (smartphone, tablet, computer), navigate to Bluetooth settings.
- Select "SOUNDPEATS A6" from the list of available devices.
- Once paired, the LED indicator will turn blue.
Note: The headphones will automatically connect to the last paired device when turned on, if that device's Bluetooth is enabled.
Diagram Description: A visual representation of the headphones showing the location of the power button, volume controls, USB-C charging port, and ANC mode button on the earcups.
Controls and Operations
Power Button (Multi-function):
- Turn On/Off: Press and hold for ~3 seconds.
- Play/Pause Music: Short press.
- Answer/End Call: Short press.
- Reject Call: Press and hold for ~1.5 seconds.
- Activate Voice Assistant: Double press.
Volume Buttons (+/-):
- Volume Up: Short press '+'.
- Volume Down: Short press '-'.
- Next Track: Press and hold '+' for ~1.5 seconds.
- Previous Track: Press and hold '-' for ~1.5 seconds.
ANC Mode Button:
- Toggle ANC Modes: Short press to cycle through Noise Cancellation On, Transparency Mode, and Noise Cancellation Off.
Icon Descriptions:
- [Power Symbol] : Power On/Off, Play/Pause, Call Answer/End, Voice Assistant
- [Volume Up Symbol] : Volume Up, Next Track
- [Volume Down Symbol] : Volume Down, Previous Track
- [Noise Cancellation Symbol] : ANC Mode Toggle
Charging
To charge your SOUNDPEATS A6 headphones:
- Connect the included USB-C cable to the charging port on the headphones.
- Connect the other end of the cable to a USB power adapter or a computer's USB port.
- The LED indicator near the charging port will glow red while charging.
- Charging is complete when the LED indicator turns off or turns green (depending on model revision). A full charge typically takes about 2-3 hours.
Diagram Description: A close-up view of the USB-C charging port on the headphone earcup, with the charging cable connected and the LED indicator illuminated.
Troubleshooting
| Issue | Possible Solution |
|---|---|
| Headphones not turning on | Ensure headphones are adequately charged. Try connecting to a power source. |
| Cannot pair with device | Ensure headphones are in pairing mode (LED flashing red/blue). Turn off and on both headphones and device. Clear Bluetooth history on device and re-pair. |
| No sound or low volume | Check volume levels on both headphones and connected device. Ensure headphones are connected to the correct audio output. |
| Poor sound quality | Ensure Bluetooth connection is stable. Try moving closer to the device. Check audio source quality. |
| ANC not working effectively | Ensure ANC mode is activated. Check for proper seal of earcups against ears. Ambient noise levels may exceed ANC capabilities. |
Safety and Compliance
Please read the following safety precautions before using the SOUNDPEATS A6 headphones:
- Do not expose to extreme temperatures (hot or cold).
- Avoid exposure to liquids or high humidity.
- Do not attempt to disassemble or modify the headphones.
- Keep out of reach of small children.
- Listen at moderate volumes to prevent hearing damage.
- Dispose of batteries responsibly according to local regulations.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
