Caterpillar offers a wide range of attachments for backhoe loaders, designed to enhance versatility and productivity across various applications. This guide details the specifications and features of these attachments.
Attachment Handbook Index
This document provides an index of available attachments, including:
- Backhoe Bucket Pins
- Quick Disconnects
- Hook Groups
- Auger Drive Assemblies
- Auger Accessories
- Auger Bits (Standard Duty, Bolt-On Rock Head, Industrial, Industrial Rock, Tree)
- Adapters and Extensions
- Loader Buckets (Pin On, IT Coupler)
- Loader Couplers
- Pallet Forks
- Pallet Fork Carriages
- Fork Tines
- Backhoe Couplers (Dual Lock™ Pin Grabber - Manual, Hydraulic)
- Backhoe Buckets (Cemetery, Coral, Cribbing, Ditch Cleaning, Grading, Heavy Duty, Heavy Duty Rock, High Capacity, Soil Excavation, Standard Duty)
- Hammers (B Models, H Models)
- Hammer Tools
- Brackets
- Hydraulic Lines
- Bracket Pins
- Cold Planers
- Compaction Wheels
- Rippers
- Vibratory Plate Compactors
- Plate Compactor Brackets
- Plate Compactor Backfill Blades
- Plate Compactor Swivel Heads
- Brooms (Angle Brooms, Pickup Brooms)
- Material Handling (Arms, Truss Booms, Lifting Hooks)
- Snow Plows
- Snow Pushes
- Bucket Receiver Snow Pushes
Auger Drive Assemblies
Cat augers offer different speed and torque options for work in a variety of soils. The speed and torque are engineered to extract soil efficiently and prevent stalling in dense ground. Select from a range of auger bits.
| MODEL - Legacy | MODEL - Current | Machine | Interface | Overall Height - in (mm) | Weight - lb (kg) | Drive Shaft Torque at Max Pressure - lb/ft (N•m) | Required Hydraulics | Drive Method | Part Number | Price |
|---|---|---|---|---|---|---|---|---|---|---|
| A26B | A68 | 415-444 | Pin On | 40 (1006) | 403 (183) | 5038 (6830) | Rear Aux | Double Planetary | 227-4359 | $ |
Auger Accessories:
- Auger Drive - A68: 225-8809
- Bracket - Pin On (415-444): 227-4350
- Lines Group (415-444): 227-4358
Auger Bits - Standard Duty
Specifications:
| Diameter - in (mm) | Overall Length - in (mm) | Weight - lb (kg) | Number of Teeth | Part Number | Price |
|---|---|---|---|---|---|
| 4 (102) | 48 (1219) | 40 (18) | 2 (pilot only) | 366-7751 | $ |
| 6 (152) | 49 (1238) | 51 (23) | 3 | 153-4083 | $ |
| 9 (229) | 49 (1238) | 75 (34) | 4 | 153-4084 | $ |
| 12 (305) | 50 (1279) | 101 (46) | 5 | 153-4085 | $ |
| 15 (381) | 51 (1289) | 111 (50) | 5 | 366-7752 | $ |
Auger Bits - Standard Duty (CONT.):
| Diameter - in (mm) | Overall Length - in (mm) | Weight - lb (kg) | Number of Teeth | Part Number | Price |
|---|---|---|---|---|---|
| 18 (457) | 50 (1279) | 143 (65) | 6 | 153-4086 | $ |
| 24 (610) | 51 (1289) | 203 (92) | 8 | 153-4089 | $ |
| 30 (762) | 50 (1279) | 282 (128) | 10 | 217-3194 | $ |
| 36 (914) | 50 (1279) | 381 (173) | 12 | 153-4091 | $ |
Auger Bits - Bolt-On Rock Head
Specifications:
| Diameter - in (mm) | Overall Length - in (mm) | Weight - lb (kg) | Number of Teeth | Part Number | Price |
|---|---|---|---|---|---|
| 6 (191) | 9 (238) | 23 (11) | 8 | 372-0230 | $ |
| 9 (267) | 10 (251) | 33 (15) | 10 | 372-0231 | $ |
| 12 (343) | 10 (251) | 41 (19) | 12 | 372-0232 | $ |
| 15 (419) | 10 (263) | 47 (21) | 14 | 372-0233 | $ |
| 18 (495) | 11 (276) | 55 (25) | 16 | 372-0234 | $ |
| 24 (648) | 12 (302) | 79 (36) | 20 | 372-0235 | $ |
- Requires standard flight.
- Transforms a standard bit into a rock drill bit.
- For severe ground conditions including rock and various types of concrete.
- Bolt-on design for easy removal when returning to normal conditions.
Auger Bits - Industrial
Specifications:
| Diameter - in (mm) | Overall Length - in (mm) | Weight - lb (kg) | Number of Teeth | Part Number | Price |
|---|---|---|---|---|---|
| 6 (152) | 48 (1224) | 57 (26) | 2 | 372-0260 | $ |
| 9 (229) | 48 (1220) | 73 (33) | 4 | 372-0261 | $ |
| 12 (305) | 48 (1219) | 90 (41) | 4 | 372-0262 | $ |
| 16 (407) | 48 (1221) | 115 (52) | 6 | 372-0263 | $ |
| 18 (457) | 48 (1224) | 108 (49) | 6 | 372-0264 | $ |
Auger Bits - Industrial (CONT.):
| Diameter - in (mm) | Overall Length - in (mm) | Weight - lb (kg) | Number of Teeth | Part Number | Price |
|---|---|---|---|---|---|
| 24 (610) | 48 (1219) | 150 (68) | 8 | 372-0265 | $ |
| 30 (762) | 48 (1219) | 181 (82) | 12 | 372-0266 | $ |
| 36 (914) | 48 (1219) | 223 (101) | 12 | 372-0267 | $ |
| 42 (1067) | 48 (1219) | 291 (132) | 16 | 372-0268 | $ |
| 48 (1219) | 48 (1220) | 344 (156) | 16 | 372-0269 | $ |
Auger Bits - Industrial Rock
Specifications:
| Diameter - in (mm) | Overall Length - in (mm) | Weight - lb (kg) | Number of Teeth | Part Number | Price |
|---|---|---|---|---|---|
| 6 (152) | 48 (1222) | 79 (36) | 8 | 372-0270 | $ |
| 9 (229) | 48 (1222) | 108 (49) | 10 | 372-0271 | $ |
| 12 (305) | 48 (1222) | 135 (61) | 12 | 372-0272 | $ |
| 16 (406) | 48 (1221) | 168 (76) | 15 | 372-0273 | $ |
| 18 (457) | 48 (1221) | 192 (87) | 16 | 372-0274 | $ |
Auger Bits - Industrial Rock (CONT.):
| Diameter - in (mm) | Overall Length - in (mm) | Weight - lb (kg) | Number of Teeth | Part Number | Price |
|---|---|---|---|---|---|
| 20 (508) | 48 (1221) | 218 (99) | 17 | 372-0275 | $ |
| 24 (610) | 48 (1222) | 282 (128) | 20 | 372-0276 | $ |
| 30 (762) | 48 (1222) | 311 (141) | 24 | 372-0277 | $ |
| 36 (914) | 48 (1222) | 410 (186) | 26 | 372-0278 | $ |
- Excellent tooth retention while digging.
- Allows for easy removal and installation.
Auger Bits - Tree
Tree bits have a tapered tip for drilling holes with a large mouth and narrow base to properly fit a root ball or holes with a small diameter to fill with mulch or fertilizer.
| Upper Diameter - in (mm) | Lower Diameter - in (mm) | Overall Length - in (mm) | Weight - lb (kg) | Number of Teeth | Part Number | Price |
|---|---|---|---|---|---|---|
| 24 (610) | 12 (305) | 51 (1289) | 163 (74) | 5 | 153-4092 | $ |
| 36 (914) | 18 (457) | 51 (1288) | 309 (140) | 7 | 153-4095 | $ |
Adapters and Extensions
| Description | Part Number | Price |
|---|---|---|
| Adapter, Hex - 2 in (50 mm) to Round - 2 9/16 in (65 mm) | 156-6329 | $ |
| Adapter, Round 2 9/16 in (65 mm) to Hex 2 in (50 mm) | 217-3191 | $ |
| Extension, Telescoping 3 ft (914 mm) | 372-0256 | $ |
| Extension, Telescoping 6 ft (1829 mm) | 372-0257 | $ |
| Extension, Auger 12 in (305 mm) | 156-6328 | $ |
| Extension, Auger 24 in (610 mm) | 217-3192 | $ |
| Retention Pin Kit | 372-0258 | $ |
Loader Buckets - Pin On
The shape of Cat loader buckets was designed to improve digging, loading and material retention. Each bucket is made of high-strength, tempered steel. Select from a range of bucket teeth.
Single Tilt General Purpose Bucket Base Edge
| PIN ON | |
|---|---|
| Capacity - yd³ (m³) | 1 (0.76) |
| Compatibility | 415-444 |
| Width - in (mm) | 89 (2262) |
| Height - in (mm) | 30 (758) |
| Length - in (mm) | 34 (852) |
| Weight - lb (kg) | 776 (352) |
| Part Number | 337-7392 |
| Price | $ |
Parallel Lift General Purpose Bucket Base Edge (NON-EST)*
| PIN ON | |
|---|---|
| Capacity - yd³ (m³) | 1.3 (1.0) |
| Compatibility | 426F2, 427F2, 428F/F2 ST, 432F/F2 |
| Width - in (mm) | 95 (2406) |
| Height - in (mm) | 33 (839) |
| Length - in (mm) | 35 (880) |
| Weight - lb (kg) | 968 (439) |
| Heavy Duty | No |
| Part Number | 337-7394 |
| Price | $ |
Parallel Lift General Purpose Bucket Base Edge (EST)*
| PIN ON | |
|---|---|
| Capacity - yd³ (m³) | 1.5 (1.15) |
| Compatibility | 434F/F2 ST, 444F/F2 |
| Width - in (mm) | 96 (2434) |
| Height - in (mm) | 35.5 (901) |
| Length - in (mm) | 37 (942) |
| Weight - lb (kg) | 959 (435) |
| Part Number | 337-7400 |
| Price | $ |
* EST = Equal size tires / NON-EST = Non-equal size tires
Loader Buckets - Pin On
Single Tilt Multi-Purpose Bucket
| PIN ON | |
|---|---|
| Capacity - yd³ (m³) | 1.35 (1.03) |
| Compatibility | 415-444 |
| Width - in (mm) | 95 (2406) |
| Height - in (mm) | 39 (985) |
| Length - in (mm) | 35 (900) |
| Weight - lb (kg) | 1593 (723) |
| Part Number | 337-7418 |
| Price | $ |
Parallel Lift Multi-Purpose Bucket Base Edge (NON-EST)*
| PIN ON | |
|---|---|
| Capacity - yd³ (m³) | 1.35 (1.03) |
| Compatibility | 426F2, 427F2, 428F/F2 ST, 432F/F2 |
| Width - in (mm) | 95 (2417) |
| Height - in (mm) | 41 (1037) |
| Length - in (mm) | 35 (892) |
| Weight - lb (kg) | 1510 (685) |
| Part Number | 350-1581 |
| Price | $ |
| Kit, Forks Brackets, Fold Over** | 559-4077 |
| Price | $ |
| Forks (Requires 2) | 452-7707 |
| Price | $ |
** Requires quantity 2 of 452-7707 Forks
* EST = Equal size tires / NON-EST = Non-equal size tires
Loader Buckets - Pin On / IT
Parallel Lift Multi-Purpose Bucket Base Edge (EST)*
| PIN ON | |
|---|---|
| Capacity - yd³ (m³) | 1.5 (1.15) |
| Compatibility | 434F/F2 and 444F/F2 |
| Width - in (mm) | 96 (2434) |
| Height - in (mm) | 42 (1075) |
| Length - in (mm) | 37 (944) |
| Weight - lb (kg) | 1700 (771) |
| Part Number | 536-0021 |
| Price | $ |
| Kit, Forks Brackets, Fold Over** | 539-6958 |
| Price | $ |
| Kit, Forks Brackets, Fold Over** | N/A |
| Price | $ |
| Forks (Requires 2) | 452-7707 |
| Price | $ |
** Requires quantity 2 of 452-7707 Forks
General Purpose Buckets - Base Edge
| IT | |
|---|---|
| Capacity - yd³ (m³) | 1.5 (1.15) |
| Compatibility | 415-444 |
| Width - in (mm) | 96 (2434) |
| Height - in (mm) | 39.2 (997) |
| Length - in (mm) | 37.6 (955) |
| Weight - lb (kg) | 1067 (484) |
| Part Number | 248-0962 |
| Price | $ |
Multi-Purpose Buckets - Base Edge
| IT | |
|---|---|
| Capacity - yd³ (m³) | 1.35 (1.03) |
| Compatibility | 415-444 |
| Width - in (mm) | 95 (2406) |
| Height - in (mm) | 38.3 (973) |
| Length - in (mm) | 34.4 (875) |
| Weight - lb (kg) | 1151 (522) |
| Part Number | 318-7267 |
| Price | $ |
* EST = Equal size tires / NON-EST = Non-equal size tires
Loader Buckets - Side Dump
Side Dump Bucket Bolt-On Cutting Edge
| IT | |
|---|---|
| Capacity - yd³ (m³) | 1.25 (0.95) |
| Width - in (mm) | 109 (2770) |
| Height - in (mm) | 45 (1154) |
| Length - in (mm) | 39 (995) |
| Weight - lb (kg) | 2178 (988) |
| Part Number | 571-8458 |
| Price | $ |
Loader Couplers
| IT | ||
|---|---|---|
| Machine | 432F/F2, 426F2, 428F/F2 | 444F/F2, 434F/F2 |
| Weight - lb (kg) | 461 (209) | 497 (226) |
| Required Hydraulics | 3rd Valve | 3rd Valve |
| Part Number | 472-4303 | 472-4304 |
| Price | $ | $ |
Pallet Forks
Cat pallet forks are designed to meet a wide variety of material handling needs. Use pallet forks for moving bulky or palletized materials on construction and industrial sites, handling bagged fertilizer and seed at landscaping and nursery sites.
Pallet Forks
| IT | ||
|---|---|---|
| Tine Length - in (mm) | 48 (1220) | 48 (1220) |
| Carriage Height - in (mm) | 28 (699) | 40 (1010) |
| Carriage Width - in (mm) | 60 (1524) | 75 (1900) |
| Tine Width - in (mm) | 5 (127) | 5 (125) |
| Tine Thickness - in (mm) | 2 (51) | 2.4 (60) |
| Operating Weight - lb (kg) | 1007 (456) | 1192 (541) |
| Overall Length - in (mm) | 67 (1698) | 64 (1618) |
| Max Tine Spacing (center to center)- in (mm) | 58 (1471) | 75 (1900) |
| Interface | Pin on (ST) | IT |
| Hydraulic Adjustment | No | Yes |
| Part Number | 461-0763 | 573-4593 |
| Price | $ | $ |
Pallet Fork Carriages
| IT | |
|---|---|
| Length - in (mm) | 14 (356) |
| Width - in (mm) | 61 (1550) |
| Height - in (mm) | 36 (914) |
| Weight - lb (kg) | 588 (267) |
| Max Tine Spacing (center to center) - in (mm) | 52 (1320) |
| Part Number | 6W-8832 |
| Price | $ |
Fork Tines
| Tine Length - in (mm) | 41.3 (1050) | 47.2 (1200) | 53.2 (1350) |
| Overall Length - in (mm) | 44.9 (1140) | 50.8 (1290) | 56.7 (1440) |
| Width - in (mm) | 5 (130) | 5 (130) | 5 (130) |
| Height - in (mm) | 31.5 (800) | 31.5 (800) | 31.5 (800) |
| Weight - lb (kg) | 183 (83) | 201 (91) | 216 (98) |
| Part Number | 6W-8933 | 6W-8900 | 6W-9739 |
| Price | $ | $ | $ |
Backhoe Couplers
Dual Lock™ Pin Grabber - Manual
| 415-444 | |
|---|---|
| Machine | 415-444 |
| Coupler Type | Dual Lock Pin Grabber |
| Weight - lb (kg) | 192 (87) |
| Manual or Hydraulic | Manual |
| Part Number | 444-7500 |
| Price | $ |
| Bucket Pins - 45-50mm | 178-3593 |
| Price | $ |
Dual Lock Pin Grabber - Hydraulic
| 415-444 | |
|---|---|
| Machine | 415-444 |
| Coupler Type | Dual Lock Pin Grabber |
| Weight - lb (kg) | 201 (91) |
| Manual or Hydraulic | Hydraulic |
| Part Number | 485-5303 |
| Price | $ |
| Bucket Pins - 45-50mm | 178-3593 |
| Price | $ |
Hydraulic Kits-Dual Lock Pin Grabber Couplers
| Machine | Side Shift 14 ft Standard Stick | Side Shift 14 ft Extended Stick | Side Shift 16 ft Extended Stick |
|---|---|---|---|
| 415-444 | 379-6431 | 371-5682 | 379-5292 |
| Price | $ | $ | $ |
Backhoe Buckets
Caterpillar offers ten types of backhoe buckets for Cat backhoe loaders. While they share many common features, each is designed to perform certain specific tasks. All buckets are pin on unless a pin lock option is available.
Cemetery Buckets
- Offers the ability to dig trenches with vertical walls and flat bottom due to the special design. This type of bucket is used to trench graves and other applications that require this trench profile, such as tanks and swimming pools.
Coral Buckets
- Available in four widths and are designed especially for rocky coral conditions such as those found on coastlines.
Cribbing Buckets
- Designed with a very narrow profile offering the capability to clean and maintain in between and under railroad ties. Ideal for light trenching on moderate abrasive soils.
Ditch Cleaning Buckets
- Available in three widths designed to provide optimum trenching, slope-cutting, grading and finishing work.
Grading Buckets
- Available in two widths and are designed to provide optimum grading, trenching, slope-cutting and finishing work in addition to nesting additional buckets for ease of transportation.
Heavy Duty Buckets
- Available in six widths (pin on and pin lock), all with standard Diagonal Retention System adapters and teeth. They are especially well suited for semi-rocky soil or where hard bank material must be broken out and removed.
Heavy Duty Rock Buckets
- Available in five widths, all with standard Diagonal Retention System adapters and teeth. They are specifically designed to work in the harsh rocky conditions found in various regions of the world.
High Capacity Buckets
- Available in four pin-on widths and are especially well suited for work in lower density soils and light materials. They have the same durable characteristics as heavy duty buckets but are capable of moving greater volumes.
Soil Excavation Buckets
- Available in four widths, they have heavy duty characteristics with higher capacity, for use in a variety of conditions including heavy impact. The more aggressive adapter nose angle combined with the new tip design provides enhanced productivity in all soils, plus longer wear and sharpness in rocky areas.
Standard Duty Buckets
- Available in five widths, all with standard Diagonal Retention System adapters and teeth. They are designed for general light duty excavation in soft soil or clay.
Standard Duty Buckets - 415-444
| PIN ON | |
|---|---|
| Width - in (mm) | 12 (305) |
| Capacity - ft³ (L) | 2.8 (79) |
| Weight - lb (kg) | 214 (97) |
| Number of Teeth | 3 |
| Part Number | 219-3410 |
| Price | $ |
Heavy Duty Rock Buckets - 415-444
| PIN ON | |
|---|---|
| Width - in (mm) | 12 (305) |
| Capacity - ft³ (L) | 3 (71) |
| Weight - lb (kg) | 250 (113) |
| Number of Teeth | 3 |
| Part Number | 219-3412 |
| Price | $ |
Cemetery Buckets - 415-444
| PIN ON | |
|---|---|
| Width - in (mm) | 26 (914) |
| Capacity - ft³ (L) | 8.5 (240) |
| Weight - lb (kg) | 520 (236) |
| Number of Teeth/Edge Type | 5 |
| Part Number | 242-5039 |
| Price | $ |
Cribbing Buckets - 415-444
| PIN ON | |
|---|---|
| Width - in (mm) | 8 (203) |
| Capacity - ft³ (L) | 1.4 (40) |
| Weight - lb (kg) | 289 (131) |
| Number of Teeth | 2 |
| Part Number | 226-5743 |
| Price | $ |
Grading / Mud Bucket - 415-444
| PIN ON | |
|---|---|
| Width - in (mm) | 47 (1200) |
| Capacity - ft³ (L) | 14.5 (410) |
| Weight - lb (kg) | 633 (287) |
| Edge Type | Cutting Edge |
| Includes Pins? | Yes |
| Part Number | 388-9668 |
| Price | $ |
Standard Duty Buckets - UNITEETH - 415-444
| PIN ON | |
|---|---|
| Width - in (mm) | 12 (305) |
| Capacity - ft³ (L) | 2.8 (79) |
| Weight - lb (kg) | 229 (104) |
| Number of Teeth | 3 |
| Part Number | 273-3791 |
| Price | $ |
Standard Duty Buckets - UNITEETH - 415-444 (JCB)
| PIN ON | |
|---|---|
| Width - in (mm) | 12 (305) |
| Capacity - ft³ (L) | 2.1 (60) |
| Weight - lb (kg) | 236 (107) |
| Number of Teeth | 3 |
| Part Number | 200-2193 |
| Price | $ |
Ditch Cleaning Buckets - 415-444
| PIN ON | |
|---|---|
| Width - in (mm) | 47 (1200) |
| Capacity - ft³ (L) | 7.8 (220) |
| Weight - lb (kg) | 271 (123) |
| Edge Type | Base Edge |
| Part Number | 192-0657 |
| Price | $ |
Ditch Cleaning Buckets - 415-444 - (JCB)
| PIN ON | |
|---|---|
| Width - in (mm) | 47 (1200) |
| Capacity - ft³ (L) | 7.8 (220) |
| Weight - lb (kg) | 271 (123) |
| Edge Type | Base Edge |
| Part Number | 191-6261 |
| Price | $ |
High Capacity Heavy Duty Buckets - UNITEETH - 415-444
| PIN ON | |
|---|---|
| Width - in (mm) | 18 (457) |
| Capacity - ft³ (L) | 6.4 (180) |
| Weight - lb (kg) | 328 (149) |
| Number of Teeth | 3 |
| Part Number | 151-7887 |
| Price | $ |
Heavy Duty Buckets - PIN ON TEETH - 415-444
| PIN ON | |
|---|---|
| Width - in (mm) | 12 (305) |
| Capacity - ft³ (L) | 3 (79) |
| Weight - lb (kg) | 216 (98) |
| Number of Teeth | 3 |
| Part Number | 273-3701 |
| Price | $ |
Heavy Duty Buckets - UNITEETH - 415-444
| PIN ON | |
|---|---|
| Width - in (mm) | 12 (305) |
| Capacity - ft³ (L) | 3 (79) |
| Weight - lb (kg) | 212 (96) |
| Number of Teeth | 3 |
| Part Number | 273-3731 |
| Price | $ |
Bucket Teeth - Features and Applications
CAT® BACKHOE GROUND ENGAGING TOOLS (GET) are made from through-hardened DH-2 steel, delivering optimal strength and resistance to abrasive wear. The DRS features a right-hand drive pin slot at a 40° angle.
| BUCKET TEETH - FEATURES AND APPLICATIONS | |
|---|---|
| Long | Attributes: • Long, symmetric, top and bottom self-sharpening cavities • Good strength, penetration and wear material Applications: • General excavation and loading • Low to moderate impact and abrasion |
| Chisel | Attributes: • Flat bottom design Applications: • Moderate impact and high abrasion for footing, steam walls or a clean trench floor |
| Soil | Attributes: • Through-hardened DH-2 steel fabrication Applications: • Hard soil jobsites • Non-abrasive, low-impact situations |
| Penetration | Attributes: • Leading edge with 60% less cross-sectional area • Single center rib that self-sharpens during wear Applications: • Densely-compacted materials |
| Wide | Attributes: • Flat bottom design • Reduced spillage Applications: • Increased bucket capacity situations • Cohesive materials with minimal penetration needs |
| Sharp | Attributes: • Curved shape • Strong and durable Applications: • Densely-compacted materials |
| Sharp - Twin | Attributes: • Curved shape • Very good penetration • Stays sharp Applications: • Hard-to-penetrate fracturable materials |
Bucket Teeth Specifications
| Type | Part Number | Price (each) | |
|---|---|---|---|
| Long | DRS230 | 208-5236 | $ |
| Chisel | DRS230 | 208-5232 | $ |
| Soil | DRS230 | 208-5234 | $ |
| Penetration | DRS230 | 208-5235 | $ |
| Wide | DRS230 | 208-5240 | $ |
| Sharp | DRS230 | 208-5239 | $ |
| Sharp - Twin | DRS230 | 208-5237 | $ |
| Pin - Heavy Duty | 253-0230 | $ | |
| Retainer | 201-1239 | $ |
Brooms
Angle Brooms
| MODEL | BA25 | BA25 |
|---|---|---|
| Width - in (mm) | 106 (2700) | 106 (2700) |
| Sweeping Width - in (mm) | 98.4 (2500) | 98.4 (2500) |
| Brush Diameter - in (mm) | 27.5 (700) | 27.5 (700) |
| Brush Material (50% Poly / 50% Wire) | Yes | Yes |
| Height - in (mm) | 51 (1300) | 51 (1300) |
| Length - in (mm) | 61 (1500) | 61 (1500) |
| Weight - lb (kg) | 1027 (466) | 1027 (466) |
| Angling | Manual | Hydraulic |
| Includes Hooks | No | No |
| Includes Water | No | No |
| Includes Twist-to-Connect Quick Disconnects | No | Yes |
| Part Number | 600-8979 | 600-8980 |
| Price | $ | $ |
| Hook Group - IT Coupler | 487-8490* | 487-8490* |
| Price | $ | $ |
| Kit - Electrical Switch (Machine Side) | N/A | 177-0893** |
| Price | $ | $ |
| Kit - Quick Disconnects (Push-Size 12) | 196-4191* | N/A |
| Price | $ | |
| Kit - Quick Disconnects (Twist-to-connect) | 455-7380* | 455-7380* |
| Price | $ | $ |
| Kit - Spray (12V) | 497-9458# | 497-9458# |
| Price | $ | $ |
| Kit - Tank, Water (400 liters/105 gallons) | 497-9461## | 497-9461## |
| Price | $ | $ |
* Required - Broom Side
** Required - Machine Side
# Requires Kit-Tank
## Requires Kit-Spray
Pickup Broom
| MODEL | BP25 |
|---|---|
| Width - in (mm) | 106 (2680) |
| Sweeping Width - in (mm) | 98.4 (2500) |
| Brush Diameter - in (mm) | 27.5 (700) |
| Brush Material (50% Poly / 50% Wire) | Yes |
| Height - in (mm) | 58 (1461) |
| Length - in (mm) | 72 (1816) |
| Weight - lb (kg) | 1349 (612) |
| Required Hydraulics | 3rd Function |
| Includes Hooks | No |
| Water - 106 gal (400 L) Tank and Sprinklers | Yes |
| Part Number | 487-8483 |
| Price | $ |
| Hook Group - IT Coupler | 487-8490* |
| Price | $ |
| Kit - Electrical Switch (Machine Side) | 177-0893** |
| Price | $ |
* Required - Broom Side
** Required - Machine Side
Material Handling
Material Handling Arms
Move pipe, concrete blocks, highway dividers and other construction materials quickly and easily with an extendable material handling arm. Length of the arm is manually adjustable to match load and reach requirements.
| IT | |
|---|---|
| Max Load Rating - lb (kg) | 4619 (2095) |
| Max Horizontal Reach - in (mm) | 155.2 (3941) |
| Extended Length - in (mm) | 155 (3937) |
| Retracted Length - in (mm) | 79 (2007) |
| Number of Adjustments | 3 |
| Length Between Adjustments - in (mm) | 38.1 (967) |
| Weight - lb (kg) | 449 (990) |
| Part Number | 229-9714 |
| Price | $ |
Truss Boom
| IT | |
|---|---|
| Max Load Rating - lb (kg) | 1102 (500) |
| Max Horizontal Reach - in (mm) | 157.5 (4000) |
| Weight - lb (kg) | 425 (193) |
| Part Number | 169-3945 |
| Price | $ |
Lifting Hook
| IT | |
|---|---|
| Max Load Rating - lb (kg) | 11023 (5000) |
| Max Horizontal Reach - in (mm) | 19.7 (500) |
| Weight - lb (kg) | 461 (209) |
| Part Number | 169-6460 |
| Price | $ |
Snow Plows
| MODEL | 9 ft (2.7 m) | 10 ft (3 m) | 12 ft (3.6 m) |
|---|---|---|---|
| Width - in (mm) | 108 (2743) | 120 (3048) | 144 (3658) |
| Overall Height - in (mm) | 41 (1051) | 41 (1051) | 41 (1051) |
| Blade Height - in (mm) | 35 (888) | 35 (888) | 35 (888) |
| Length - in (mm) | 55 (1385) | 55 (1385) | 55 (1385) |
| Weight - lb (kg) | 1885 (855) | 1989 (902) | 2180 (989) |
| Required Hydraulics | Front Aux | Front Aux | Front Aux |
| Part Number | 481-3671 | 481-3672 | 481-3673 |
| Price | $ | $ | $ |
Snow Pushes
IT Coupler - Snow Pushes
| MODEL | 10 ft (3.05 m) | 12 ft (3.66 m) | 10 ft (3.05 m) | 12 ft (3.66 m) |
|---|---|---|---|---|
| Working Width - in (mm) | 120 (3048) | 144 (3658) | 120 (3048) | 144 (3658) |
| Overall Width - in (mm) | 127 (3220) | 151 (3829) | 127 (3220) | 151 (3829) |
| Trip Edge Height - in (mm) | 5 (137) | 5 (137) | 5 (137) | 5 (137) |
| Overall Height - in (mm) | 38 (975) | 38 (975) | 38 (975) | 38 (975) |
| Length - in (mm) | 51 (1279) | 51 (1279) | 51 (1279) | 51 (1279) |
| Weight - lb (kg) | 1803 (818) | 1995 (905) | 1803 (818) | 4112 (1865) |
| Trip Edge Type | Steel | Steel | Rubber | Rubber |
| Part Number | 479-8087 | 479-8091 | 508-8290 | 508-8295 |
| Price | $ | $ | $ | $ |
Bucket Receiver Snow Pushes
| MODEL | 10 ft (3.05 m) | 12 ft (3.66 m) | 10 ft (3.05 m) | 12 ft (3.66 m) |
|---|---|---|---|---|
| Working Width - in (mm) | 120 (3048) | 144 (3658) | 120 (3048) | 144 (3658) |
| Overall Width - in (mm) | 127 (3220) | 151 (3829) | 127 (3220) | 151 (3829) |
| Trip Edge Height - in (mm) | 5 (137) | 5 (137) | 5 (137) | 8 (194) |
| Overall Height - in (mm) | 38 (975) | 38 (975) | 38 (975) | 43 (1086) |
| Length - in (mm) | 69 (1755) | 69 (1755) | 69 (1755) | 77 (1945) |
| Weight - lb (kg) | 1995 (905) | 2185 (991) | 4112 (1865) | 2787 (1264) |
| Trip Edge Type | Steel | Steel | Rubber | Rubber |
| Cutting Edge | Yes | Yes | Yes | Yes |
| Trip Edge | Yes | Yes | Yes | Yes |
| Part Number | 479-8088 | 479-8092 | 508-8300 | 508-8305 |
| Price | $ | $ | $ | $ |
Hammers
B Hammers
Cat hammers are high performance breakers, designed for maximum performance on demolition, construction and road work. Check with your local Cat dealer for the mounting bracket and hydraulic lines to match the hammer of choice.
B6, B6s, B8, B8s
| MODEL | B6 | B6s | B8 | B8s |
|---|---|---|---|---|
| Height Without Tool - in (mm) | 37 (948) | 39 (999) | 40 (1005) | 41 (1050) |
| Overall Height - in (mm) | 56 (1422) | 57 (1439) | 56 (1412) | 56 (1420) |
| Overall Length - in (mm) | 12.4 (316) | 12.4 (316) | 12 (316) | 12 (316) |
| Overall Width - in (mm) | 17 (440) | 17 (440) | 17 (440) | 17 (440) |
| Tool Shaft Diameter | 2.7 (68) | 2.7 (68) | 3 (75) | 3 (75) |
| Operating Weight - With Tool - lb (kg) | 571 (259) | 611 (277) | 1005 (456) | 992 (450) |
| Minimum Operating Pressure - psi (kPa) | 1775 (12238) | 1775 (12238) | 1704 (11749) | 1704 (11749) |
| Sound - dB | 128 | 124 | 133 | 129 |
| Required Hydraulics | Rear Aux | Rear Aux | Rear Aux | Rear Aux |
| Part Number | 532-9106 | 532-9206 | 532-9108 | 532-9208 |
| Price | $ | $ | $ | $ |
B9**, B9s**
| MODEL | B9** | B9s** |
|---|---|---|
| Height Without Tool - in (mm) | 51 (1298) | 51 (1296) |
| Overall Height - in (mm) | 69 (1753) | 68 (1733) |
| Overall Length - in (mm) | 21 (530) | 21 (530) |
| Overall Width - in (mm) | 16 (400) | 16 (400) |
| Tool Shaft Diameter | 3.4 (85) | 3.4 (85) |
| Operating Weight - With Tool - lb (kg) | 1166 (529) | 1142 (518) |
| Minimum Operating Pressure - psi (kPa) | 1846 (12728) | 1846 (12728) |
| Sound - dB | 135 | 125 |
| Required Hydraulics | Rear Aux | Rear Aux |
| Part Number | 532-9109 | 532-9209 |
| Price | $ | $ |
** Not compatible with Side Shift Machines
B Hammers - Side Mount
| MODEL | B8 |
|---|---|
| Compatibility | 415-444 |
| Height Without Tool - in (mm) | 44 (1106) |
| Overall Height - in (mm) | 60 (1514) |
| Overall Length - in (mm) | 28 (698) |
| Overall Width - in (mm) | 15 (385) |
| Tool Shaft Diameter | 3 (75) |
| Operating Weight - With Tool - lb (kg) | 803 (364) |
| Minimum Operating Pressure - psi (kPa) | 1704 (11759) |
| Sound - dB | 133 |
| Required Hydraulics | Rear Aux |
| Part Number | 582-1508 |
| Price | $ |
NOTE: All Cat hammers come with two tools.
H Hammers
H65s, H80s, H95s**
| MODEL | H65s | H80s | H95s** |
|---|---|---|---|
| Height Without Tool - in (mm) | 38 (953) | 42 (1057) | 49 (1250) |
| Overall Height - in (mm) | 52 (1324) | 56 (1433) | 66 (1666) |
| Overall Length - in (mm) | 18 (451) | 21 (535) | 21 (520) |
| Overall Width - in (mm) | 14 (346) | 19 (485) | 20 (512) |
| Tool Shaft Diameter | 2.7 (68) | 3 (75) | 3.5 (88) |
| Operating Weight - Without Tool - lb (kg) | 534 (242) | 725 (329) | 1109 (503) |
| Minimum Operating Pressure - psi (kPa) | 1450 (10000) | 1450 (10000) | 1450 (10000) |
| Maximum Operating Pressure - psi (kPa) | 2393 (16500) | 2538 (17500) | 2495 (17200) |
| Minimum Flow - gpm (L/min) | 11 (40) | 19 (70) | 19 (70) |
| Maximum Flow - gpm (L/min) | 30 (115) | 34 (130) | 40 (150) |
| Sound - dB | 124 | 120 | 124 |
| Required Hydraulics | Rear Aux | Rear Aux | Rear Aux |
| Part Number | 561-2552 | 561-2553 | 561-2555 |
| Price | $ | $ | $ |
*Top Mount Hammers require mounting brackets and lines - see chart on page 35 for more info
** Not compatible with Side Shift Machines
Hammer Tools
| Tool | B6 | B8 | B9 | H65 | H80 | H95 |
|---|---|---|---|---|---|---|
| Moil | 523-3193 | 532-9120 | 532-9219 | N/A | N/A | N/A |
| Price | $ | $ | $ | |||
| Cone | 523-3195 | 532-9118 | 542-1762 | 423-8308 | 369-1548 | 369-0792 |
| Price | $ | $ | $ | $ | $ | $ |
| Blunt | 523-3196 | 532-9117 | 542-1763 | 423-8309 | 376-7947 | 373-7159 |
| Price | $ | $ | $ | $ | $ | $ |
| Chisel, Inline | 523-3191 | 532-9121 | 542-1764 | 423-8307 | 369-1549 | 369-0793 |
| Price | $ | $ | $ | $ | $ | $ |
| Chisel, Crosscut | 523-3197 | 532-9119 | 542-1765 | 248-8022 | 399-1711 | 399-1710 |
| Price | $ | $ | $ | $ | $ | $ |
| Moil - Tuck | N/A | 566-3424 | N/A | N/A | N/A | N/A |
| Price | $ | |||||
| Cone - Tuck | N/A | 566-3422 | N/A | N/A | N/A | N/A |
| Price | $ | |||||
| Blunt - Tuck | N/A | 566-3421 | N/A | N/A | N/A | N/A |
| Price | $ | |||||
| Chisel, Inline - Tuck | N/A | 566-3425 | N/A | N/A | N/A | N/A |
| Price | $ | |||||
| Chisel, Crosscut - Tuck | N/A | 566-3423 | N/A | N/A | N/A | N/A |
| Price | $ | |||||
| Spade, Parallel | ## | ## | N/A | 433-9653 | 381-6720 | N/A |
| Price | $ | $ | $ | $ | ||
| Spade, Transverse | ## | ## | N/A | 433-9652 | 381-6719 | N/A |
| Price | $ | $ | $ | $ | ||
| Compacting Plate | ## | ## | N/A | 433-9651 | 381-6721 | N/A |
| Price | $ | $ | $ | $ |
## Coming Soon
Hammer Brackets, Lines / Pins
Hammer Brackets
| MODEL | B6* | B8* | B9** | H65s* | H80s** | H95s** |
|---|---|---|---|---|---|---|
| Bracket 45 mm/50 mm, Pin On | 567-9320 | 567-9320 | 564-9842 | 567-9320 | 564-9842 | 564-9842 |
| Price | $ | $ | $ | $ | $ | $ |
| Bracket 60 mm/60 mm, Pin On | N/A | N/A | 564-9843 | N/A | 564-9843 | 564-9843 |
| Price | $ | $ | $ | $ | $ | $ |
| Bracket BHL-STD, Pin On, Tuck, LG | 551-1546 | 551-1546 | N/A | 551-1546 | N/A | N/A |
| Price | $ | $ | $ | $ | ||
| Bracket BHL- EXT, Pin On, Tuck, LG | 565-3682 | 565-3682 | N/A | 565-3682 | N/A | N/A |
| Price | $ | $ | $ | $ | ||
| Bracket BHL, QC, Pin On, Tuck, LG | 572-6066 | 572-6066 | N/A | 572-6066 | N/A | N/A |
| Price | $ | $ | $ | $ |
* Uses LG Brackets
** Uses XL Brackets
Hammer Lines
| MODEL | B6 | B8 | B9 | H65s | H80s | H95s |
|---|---|---|---|---|---|---|
| Lines, BHL | 570-6298 | 570-6298 | 532-9282 | 313-4791 | 399-6962 | 399-6962 |
| Price | $ | $ | $ | $ | $ | $ |
| Lines BHL - Tuck | 565-6083 | 565-6083 | N/A | N/A | N/A | N/A |
| Price | $ | $ | ||||
| Lines BHL - QC | N/A | N/A | N/A | N/A | 399-6964 | 399-6964 |
| Price | $ | $ | ||||
| Lines BHL - 450 | N/A | N/A | 532-9282 | N/A | 399-6964 | 399-6964 |
| Price | $ | $ | $ |
Hammer - Bracket Pins
| MODEL | B6 | B8 | B9 | H65s | H80s | H95s |
|---|---|---|---|---|---|---|
| Pins, BHL-F (45 mm/50 mm) | 178-3593 | 178-3593 | 178-3593 | 178-3593 | 178-3593 | N/A |
| Price | $ | $ | $ | $ | $ | |
| Pins, BHL-F (60 mm/60 mm) | N/A | N/A | 556-3635 | N/A | 556-3635 | 556-3635 |
| Price | $ | $ | $ |
Cold Planers
Cat cold planers are designed for small paving jobs in residential and commercial applications and are primarily used to economically restore asphalt and concrete surfaces. Designed with a high speed drum and conical bits to quickly remove asphalt and concrete. They are ideal for milling imperfections prior to resurfacing, removing deteriorated pavement, removing traffic lane stripes and jobs where the use of dedicated planers is limited.
| COLD PLANERS | PIN ON |
|---|---|
| MODEL | PC404 |
| Machine | 415-444 |
| Working Width - in (mm) | 18 (450) |
| Overall Width - in (mm) | 33 (828) |
| Overall Length - in (mm) | 37 (950) |
| Overall Height - in (mm) | 41 (1030) |
| Max Cutting Depth - in (mm) | 5 (125) |
| Required Hydraulics | Rear Aux |
| Weight - lb (kg) | 1499 (680) |
| Part Number | 219-5470 |
| Price | $ |
| Pins Group - Mounting | 178-3593 |
| Price | $ |
Compaction Wheels
Cat compaction wheels provide a low cost option for trench compaction. The wheels feature tapered roller bearings and tampered foot design for smooth operation. Six to ten passes are usually adequate to achieve compaction in normal soil conditions, dependent on the required compaction levels. Pin on compaction wheels can be used in combination with applicable pin grabber quick coupler.
| Model | 12 in | 18 in | 24 in |
|---|---|---|---|
| Overall Width - in (mm) | 16.6 (424) | 17.2 (439) | 22 (559) |
| Compaction Width - in (mm) | 11.3 (286) | 17.2 (439) | 22 (559) |
| Overall Height - in (mm) | 44.8 (1138) | 43.8 (1112) | 43.7 (1110) |
| Overall Length - in (mm) | 39.2 (995) | 39 (991) | 39 (991) |
| Weight - lb (kg) | 873 (396) | 1108 (503) | 1179 (535) |
| Number of Wheels | 2 | 3 | 3 |
| Number of Pads | 18 | 27 | 37 |
| Part Number | 517-6992 | 517-6993 | 517-6994 |
| Price | $ | $ | $ |
Rippers / Vibratory Plate Compactors
Rippers
Built to cut through dense dirt, loosen rocky soil and break below the frost layer, Cat rippers are taking on some of the most challenging ground conditions. And because they are made for specific Cat models, they can better transfer machine power into ripping power.
| RIPPERS | PIN ON |
|---|---|
| Machine | 415-444 |
| Shank Length - in (mm) | 25 (639) |
| Overall Length - in (mm) | 33 (833) |
| Width - in (mm) | 17 (420) |
| Tip Radius - in (mm) | 32 (806) |
| Weight - lb (kg) | 240 (109) |
| Part Number | 491-4075 |
| Price | $ |
Vibratory Plate Compactors
Cat vibratory plate compactors provide superior compaction force in a reliable, low-maintenance package. These units produce high-power impulses at a rate of 2200 impacts per minute. The forces generated by this vibration drive soil particles close together for solid, stable compactions. Whether in a trench or on a slope, driving sheeting or posts, Cat compactors are the superior choice for any jobsite's compaction tasks.
| MODEL | CVP40 |
|---|---|
| Base Plate Width - in (mm) | 23 (590) |
| Compaction Area - ft² (m²) | 6.1 (0.57) |
| Base Plate Length - in (mm) | 38 (965) |
| Required Hydraulics | Rear Aux |
| Weight - lb (kg) | 886 (402) |
| Part Number | 551-4957 |
| Price | $ |
| Lines Gp - BHL-F (415-444) | 491-7486 |
| Price | $ |
| Lines Gp - BHL-F (450) | |
| Price | $ |
| Kit - Thumb Stop* | 311-2600 |
| Price | $ |
* FOR USE WITH: 415-440 D, E, F and Next Gen machines when fitted with pin grabber quick coupler, a thumb arrangement and CVP40 compactor. Needed to protect hydraulic hoses from crushing.
Vibratory Plate Compactors
Plate Compactor Brackets
| PLATE COMPACTOR BRACKETS | |
|---|---|
| Bracket 45 mm/50 mm, Pin On, XL | 564-9842 |
| Price | $ |
| Bracket 60 mm/60 mm, Pin On, XL | 564-9843 |
| Price | $ |
| Bracket 1/4 yd Pin Lock, XL | 416-8031 |
| Price | $ |
| Bracket 1/2 yd Pin Lock, XL | 564-2732 |
| Price | $ |
Plate Compactor Backfill Blades
| PLATE COMPACTOR BACKFILL BLADES | |
|---|---|
| Backfill Blade | 211-8200 |
| Price | $ |
Plate Compactor Swivel Heads
| PLATE COMPACTOR SWIVEL HEADS | |
|---|---|
| Swivel Head, XL to XL | 264-5907 |
| Price | $ |
| Swivel Head, Pin On, BHL to XL* | 311-2599 |
| Price | $ |
* FOR USE WITH: CVP40 and 415-440 D, E, F and Next Gen machines - swivel and bracket combined.
