iRig BlueTurn Bluetooth Page Turner

Safety Information

• To reduce the risk of internal damage or malfunction, do not expose the unit to rain, moisture, or excessive humidity. Avoid spilling liquids on the unit.
• If you do not plan to use the unit for an extended period, remove the batteries.
• Never expose the unit to temperatures higher than 60°C (140°F).
• Do not step on or step over the unit, as this may cause permanent damage to the iRig BlueTurn structure and foot switches.
• The iRig BlueTurn has no user-serviceable parts. Do not attempt to open the unit.
• All servicing should be referred to qualified personnel only.
• The iRig BlueTurn communicates via Bluetooth. Avoid placing it in metallic cases or structures that could shield the Bluetooth signal.
• Caution: Risk of explosion if the battery is replaced with an incorrect type. Use only consumer-grade, non-rechargeable CARBON-ZINC or ALKALINE batteries.

iRig BlueTurn Overview

Thank you for purchasing the iRig BlueTurn. Your package contains:

• iRig BlueTurn unit
• 2 x AAA batteries
• Quick Start Guide
• Registration Card

The iRig BlueTurn is a Bluetooth controller pedalboard with two foot switches for scrolling through lyrics, guitar tabs, and sheet music from compatible Apps. It is ideal for Mac, iOS, and Android devices equipped with Bluetooth Low Energy. It facilitates effortless scrolling and is also useful for teleprompting, slide presentations, instrument effects, and media control.

Register Your iRig BlueTurn

Registering your product provides access to technical support, activates your warranty, and grants free JamPoints™ for discounts on future IK purchases. Registration also ensures you receive updates on the latest software and IK products.

Register at: www.ikmultimedia.com/registration

Installation and Setup

1. Install two AAA batteries into the iRig BlueTurn's battery compartment, ensuring correct polarity (+ and -). The iRig BlueTurn utilizes Bluetooth LE technology for low power consumption and long battery life.
2. Power ON the iRig BlueTurn by pressing and holding one of the foot switches while flipping the ON switch. Refer to the "iRig BlueTurn modes" section for the complete startup procedure.
3. When the selected mode is loaded, the iRig BlueTurn's Bluetooth LED will start to blink.
4. Pair the iRig BlueTurn with your device by following your device's Bluetooth pairing procedure. The Bluetooth LED will remain lit once paired.
5. Download and launch the app. You can find the iKlip Stage app at ikdownloads.com/irigblueturn.

Note: The iRig BlueTurn is discoverable for 30 seconds at startup after a mode has been selected. If no device connects within this time, it will hide and must be turned off and on again.

iRig BlueTurn Modes

The iRig BlueTurn offers three preset modes, each sending different control messages. The following describes how to select and use each mode:

Mode 1

1. Turn the unit on by holding a foot switch and flipping the ON switch. The unit's LEDs will blink.
2. Pressing the "left" foot switch boots the iRig BlueTurn in Mode 1, which is the most common mode for iOS and Android apps.
3. Pair with your device following the Bluetooth pairing procedure.
4. Left foot-switch: UP Arrow
5. Right foot-switch: DOWN Arrow

Mode 2

1. Turn the unit on by holding a foot switch and flipping the ON switch. The unit's LEDs will blink.
2. Pressing the "right" foot switch boots the iRig BlueTurn in Mode 2, primarily for MAC document applications like MS Word, Powerpoint, and Acrobat.
3. Pair with your device following the Bluetooth pairing procedure.
4. Left foot-switch: Page UP
5. Right foot-switch: Page DOWN

Mode 3

1. Turn the unit on by holding a foot switch and flipping the ON switch. The unit's LEDs will blink.
2. Pressing both foot switches boots the iRig BlueTurn in Mode 3.
3. Pair with your device following the Bluetooth pairing procedure.
4. Left foot-switch: LEFT Arrow
5. Right foot-switch: RIGHT Arrow

Virtual Keyboard in iOS

To toggle the virtual keyboard on/off in iOS, place the cursor in a text box and press and hold the left foot-switch ("up arrow") for at least 3 seconds.

Startup Notes

• Powering up the iRig BlueTurn without holding any switch boots it in the last used mode, indicated by the LEDs.
• Holding a switch during power-on enters mode selection. LEDs will flash until a mode is selected, and pairing is not possible during this time.
• Modes have pre-assigned HID messages that cannot be edited.
• Holding both foot switches during startup enters boot-loader mode, used for firmware updates.
• The iRig BlueTurn is discoverable for 30 seconds after startup (once a mode is selected). If no connection is made, it will hide and require a power cycle.

Foot Switch Backlighting

Once paired, the iRig BlueTurn's foot switches will illuminate, aiding operation in low-light conditions.

Status LED

The central LED indicates the iRig BlueTurn's status:

• OFF: Unit is off or batteries are depleted.
• Continuous flashing: Unit is ON and waiting for pairing. Enters sleep mode after 30 seconds if not paired. Reactivate by cycling the power switch.
• Continuous ON: Unit is ON and paired with the device.
• Mostly OFF with fast ON flashes: Low battery. Replace batteries soon.

Remember to turn OFF the iRig BlueTurn after use to conserve battery life.

Troubleshooting

iRig BlueTurn not turning ON

Check battery polarity and ensure batteries have sufficient charge.

Cannot connect iRig BlueTurn to app

Verify that the app supports HID message over external Bluetooth devices and that your device supports Bluetooth LE.

Cannot pair Bluetooth device

The iRig BlueTurn is discoverable for 30 seconds after startup (once a mode is selected). If pairing fails within this window, remove the iRig BlueTurn from your device's Bluetooth list and retry pairing.

Specifications

• Communication: Bluetooth Low Energy (4.1).
• Range: Approximately 33 feet (10 Meters), subject to orientation and environmental factors.
• Two backlit foot switches.
• Low-intensity backlighting for visibility in low light.
• Low power consumption.
• Lightweight, sturdy, and durable construction.
• Size: 126mm x 93mm x 25mm

Warranty

For warranty information, please visit: www.ikmultimedia.com/warranty

Support and More Info

For support, please visit: www.ikmultimedia.com/support

Regulatory Information

U.S.A.

Contains Bluetooth shutter with FCC ID: WAP2001

FC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

CANADA

Contains/Contient Bluetooth shutter with IC ID: 7922A-2001

IC Statement/Warning: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. To comply with Industry Canada RF radiation exposure limits for general population, the antenna(s) used for this transmitter must be installed such that a minimum separation distance of 20cm is maintained between the radiator (antenna) and all persons at all times and must not be co-located or operating in conjunction with any other antenna or transmitter. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Avertissement IC: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 1. l'appareil ne doit pas produire de brouillage, et 2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Pour satisfaire les limites d'exposition aux radiations RF de l'Industry Canada, les antennes utilisées pour cet émetteur doivent être installées de façon telle qu'au moins 20cm séparent l'émetteur (antenne) de toute personne, et ne doivent être ni situées ni utilisées en conjonction avec n'importe quelle autre antenne ou émetteur.

EUROPE

CE

AUSTRALIA/NEW ZEALAND

R005-101007

JAPAN

TRA REGISTERED N°: ER44686/16 DEALER N°: DA45962/15

UNITED ARAB EMIRATES

TRA REGISTERED N°: ER44686/16 DEALER N°: DA45962/15

iRig® BlueTurn, AmpliTube®, VocaLive™™, SampleTank®, iGrand Piano™™ are trademarks or registered trademarks property of IK Multimedia Srl. All other product names and images, trademarks and artists names are the property of their respective owners, which are in no way associated or affiliated with IK Multimedia. iPad, iPhone, iPod touch, Mac, Mac logo and GarageBand are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Bluetooth is a trademark of Bluetooth SIG, Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.