Hot Wheels Power Loop Raceway Track Set

Contents

The track set includes various components labeled A through K, and a label sheet. Key components are:

• A: Booster/Launcher unit
• B: Track pieces (various curves and straights)
• C: Loop sections
• D: Track supports/legs
• E: Track connectors
• F: Track pieces with flame graphics
• G: Booster mechanism parts
• H: Track connectors/holders
• I: Straight track pieces
• J: Straight track pieces
• K: Track supports/legs

A label sheet is provided to apply decals to the track components.

Diagram Description: A visual overview of all the individual track components (A-K) and the label sheet, laid out for identification.

Battery Installation

This track set requires 2 new "D" alkaline batteries (not included).

Instructions:

• Install 2 new "D" alkaline batteries into the booster unit, ensuring correct polarity (+/-) as indicated.
• Close the battery cover securely.
• Replace batteries when the booster can no longer propel cars through the track set.
• For optimal performance, use only alkaline batteries.

Diagram Description: An illustration shows the battery compartment of the booster unit with two "D" batteries being inserted, highlighting the correct positive (+) and negative (-) terminal orientation.

Operating Tips

• Adjust track side walls at each connection point to ensure smooth car movement.

Diagram Description: A close-up view shows how to adjust the side walls of a track connector piece for optimal car flow.

Battery Safety Information

• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries must be removed from the product before charging and charged under adult supervision.
• Do not mix battery types (alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium)) or mix old and new batteries.
• Use only batteries of the same or equivalent type as recommended.
• Ensure batteries are inserted with the correct polarity.
• Remove exhausted batteries from the product.
• Do not short-circuit the supply terminals.
• Dispose of batteries safely.
• Do not dispose of the product or batteries in fire, as batteries may explode or leak.

Environmental Protection: Do not dispose of this product with household waste [2012/19/EU]. Check with your local authority for recycling advice and facilities.

Symbol Description: An icon representing proper disposal of electronic waste, showing a crossed-out trash bin with a recycling symbol.

Assembly Instructions

Refer to the letters on parts and the contents page to help with assembly.

Step 1: Connecting Track Sections

Diagram Description: Shows how to connect track pieces, specifically highlighting the connection of a loop section (E) to a straight track piece (B) using connectors (H).

Step 2: Assembling the Loop and Supports

Diagram Description: Illustrates the assembly of the main loop structure (C) with track pieces (B) and supports (K, H, G). It shows how different parts connect using clips and slots.

Step 3: Attaching the Booster Unit

Diagram Description: Depicts attaching the booster unit (A) to the assembled track structure, connecting it to the start of the loop or ramp.

Step 4: Completing the Track Layout

Diagram Description: Shows the final assembly of various track sections, including ramps and curves, connecting them to the booster and loop sections, utilizing supports (K, B, H, G, A).

How to Play

1. Power On: Turn the booster switch to the 'ON' position (represented by 'I').
2. Launch Car: Place a Hot Wheels car onto the track and activate the booster.
3. Watch it Go: Observe the car as it travels through the loop and around the track.
4. Power Off: Turn the booster switch to the 'OFF' position (represented by 'O') when finished playing.

Diagram Description: Simple icons showing a switch in the 'ON' position (labeled 'I') and 'OFF' position (labeled 'O').