SMART FV4 Smartwatch User Manual

Manufacturer Information & Compliance

Manufacturer: Guangzhou Lige Watch Industry Co., Ltd

Address: Room 201, Building 12, No.684, Shibei Industrial Road, Dashi Street, Panyu District, Guangzhou

FCC Compliance: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

EU/UK Representative:

• EC REP: SUCCESS COURIER SL, Address: CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain, E-Mail: successservice2@hotmail.com
• UK REP: EVATOST CONSULTING LTD, Address: Office 101 32 Threadneedle Street, London, United Kingdom, EC2R 8AY, E-Mail: contact@evatost.com

Disclaimer: We act as UK/EU representatives for cross-border sellers and are not manufacturers, importers, or distributors. We are not responsible for after-sales services or product quality/infringement issues; the manufacturer/importer/seller is solely responsible.

Recycling Information (French): This device, its accessories, cords, and batteries are recyclable. Dispose of packaging separately. Prioritize repair or donation of your device!

1. Charging and Activation

Connect the FV4 charging cable to a 5V-1A adapter and plug it in. Ensure the cable aligns correctly with the metal contact pins on the watch's back. Built-in magnets will automatically attach to the correct poles for charging.

If the watch is new or unused for a long time, the battery might be in a 0-volt protection state. Charge for at least 15 minutes to activate. Magnets ensure proper charging alignment.

It is recommended to charge the device monthly. Keep it fully charged and turn it off when not in use for optimal longevity and performance.

[Visual: Back of the SMART FV4 smartwatch showing the charging cable magnetically attached to the charging pins.]

2. App Download and Watch Button Functions

Download the "FitCloudPro" app from the App Store ? or Google Play ▶️. You can also scan the QR code ? provided to download.

[Visual: Screenshots showing the FitCloudPro app available on the App Store and Google Play, with associated QR codes for download.]

Watch Button Functions: Press and hold the button for 3 seconds for On/Off. A short press functions as Back/Menu.

3. Pairing the Watch - iOS

Upon first use of the FitCloudPro app, grant necessary permissions for Bluetooth ?, wireless data, and notifications via your smartphone's settings.

[Visual: iOS phone screenshots displaying prompts: "FitCloudPro™ Would Like to Use Bluetooth" and "FitCloudPro™ Would Like to Send You Notifications", with options to "Don't Allow" or "OK"/"Allow".]

Use the app by selecting "Visit as Guest" or "Sign In".

[Visual: iOS phone screenshot showing a prompt: "Allow 'FitCloudPro' to use wireless data?" with options for "WLAN & Cellular", "WLAN Only", "Don't Allow", and a "Sign In" button.]

4. Bluetooth Connection - iOS

Select 'Search Now' to discover and connect to the NX17 PRO Bluetooth device. Tap the watch to 'Agree', grant access, and complete pairing.

[Visual: iOS phone screenshots illustrating the pairing process: "Bind Smartwatch", "Discover new device...", "NX17 PRO", and a prompt "Agree to the phone binding request?".]

Allow Bluetooth ? pairing requests and notifications.

[Visual: iOS phone screenshots showing "Bluetooth Pairing Request" and "Allow NX17 PRO to Receive Your iPhone Notifications?".]

5. Setting Up the FitCloudPro App on Android

Agree to the FitCloud Pro Privacy Policy & User Agreement, then Sign In or use the app without an account.

[Visual: Android phone screenshots of the FitCloudPro app welcome screen, privacy policy agreement, and login/signup options.]

Enter your personal information and allow Bluetooth ? search/connection for nearby devices.

[Visual: Android phone screenshots for profile setup (Nickname, Birthday, Sex, Height, Weight) and a "Bind Device" screen requesting permissions like "Nearby devices".]

Allow FitCloudPro to discover and connect to NX17 PRO devices. Tap the watch and select 'Agree' to grant access and complete pairing.

[Visual: Android phone screenshots showing device binding: "NX17 PRO", "Connecting", and a prompt "Agree to the phone binding request?".]

Allow Bluetooth ? pairing requests and access to contacts.

[Visual: Android phone screenshots showing "Bluetooth pairing request" and "Allow access to contacts?".]

6. Activating Push Notifications

Notifications cannot be received if the phone is in "Do Not Disturb" mode. Ensure Bluetooth ? is active on your phone, the FitCloud Pro app is running, and the watch is connected via Bluetooth.

Verify that notifications are visible in your phone's notification bar.

[Visual: Phone screenshots showing notification settings within the FitCloudPro app, including toggles for various apps (Call ?, SMS, WeChat, etc.) and a "Do Not Disturb" status indicator.]

7. Activating Weather Location

Enable the weather report function in the FitCloudPro app to receive weather forecasts.

[Visual: Phone screenshots showing a location permission request for the FitCloudPro app.]

8. Setting Watch Display Units

Configure unit preferences within the app. Options include:

• Length: Metric System (Meters, Kilometers) or Imperial (Feet, Miles)
• Weight: Metric System (KG) or Imperial (Pounds)
• Temperature: Centigrade (°C) or Fahrenheit (°F)

[Visual: Phone screenshots showing app settings for unit preferences for length, weight, and temperature.]

9. Setting and Downloading Watch Faces

Press and hold the watch face for 2 seconds, then swipe quickly to switch between different watch faces.

[Visual: Representation of switching watch faces on the smartwatch.]

Download watch faces from the FitCloudPro watch face UI market. Only one watch face UI can be saved at a time; new downloads replace existing ones.

[Visual: Phone screenshots displaying the watch face selection screen within the FitCloudPro app, showing various available watch face designs.]

Touchscreen Functionality:

• Control Center: Swipe down.
• Function/Activity Screens: Swipe left/right.
• Messages: Swipe up.

[Visual: Diagram illustrating smartwatch interface navigation: Control Center, Function (Steps, Distance, Calories), Messages, and Last Used Weather/Call screens.]

10. Resetting the Watch

If exercise, sleep, or heart rate data is inaccurate, or if Bluetooth ? connection or call functions are faulty, try resetting the watch. Alternatively, firmware can be updated via the app.

[Visual: Watch interface showing the settings menu with options like Password, System, Language, Reset, Shutdown, and System Information.]

11. Setting Always-On Displays

Tap "Settings" ⚙️ and navigate to "Display".

[Visual: Watch interface showing the settings menu with options like "Style Switch", "Display", and "Battery".]

Tap "AOD-Watch" to activate either the "Digital Clock" or "Analog Clock".

[Visual: Watch interface showing options for "Screen Time", "Lift to view", and "AOD clock" toggles, including "Digital clock" and "Analog clock" options.]

Note: To conserve battery, the "Lift to Wake" function can be disabled when the AOD function is active.

12. Turning Call and Media Audio On/Off

Tap ? to activate or deactivate Bluetooth ? Calling.

[Visual: Watch interface showing toggles for "Call audio" and "Media audio".]

To prevent the watch from playing media sounds or making/answering calls, turn off the Media Audio and Call Audio settings.

Note: If Media Audio is activated, Call Audio must also be activated.

13. Adding and Synchronizing Favorite Contacts

Add contacts to your watch via the FitCloudPro app.

[Visual: Phone screenshots showing FitCloudPro settings for "Favorite Contacts" and the process of adding contacts.]

Note: Due to privacy settings, some phones may require manual activation of Bluetooth ? contact synchronization.

[Visual: Phone screenshots showing iOS Bluetooth settings and contact sync options.]

14. Important Safety Tips

Do not expose the watch to extreme temperatures like direct sunlight or near high-temperature devices (heaters, ovens, microwaves, water heaters). High temperatures can cause battery explosions or safety incidents.

The product contains a non-removable pure cobalt battery. Do not attempt to disassemble it.

While the product has passed water tests, varied usage may affect sealing performance. Use with caution during swimming and diving, and avoid saunas or hot showers.

These products are not medical devices. Health data (heart rate, blood oxygen, sleep, calories, steps) is for reference only, not for clinical diagnosis.

15. Activating Automatic App Start

Follow these steps to enable the FitCloudPro app to start automatically on different phone brands:

• XIAOMI: Settings ⚙️ -> Apps -> Permissions -> Autostart -> Enable FitCloudPro.
• HUAWEI: Settings ⚙️ -> Apps & Services -> App Launch -> Enable FitCloudPro.
• SAMSUNG: "Smart Manager" -> "Auto-Run Application" -> "Auto-Start Application" -> Enable the program for auto-start settings.