SMART TX2 Smartwatch User Manual

Manufacturer and Compliance

Manufacturer: Guangzhou Lige Watch Industry Co., Ltd

Address: Room 201, Building 12, No.684, Shibei Industrial Road, Dashi Street, Panyu District, Guangzhou

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

EC REP: SUCCESS COURIER SL, CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain, E-Mail: successservice2@hotmail.com

UK REP: EVATOST CONSULTING LTD, Office 101 32 Threadneedle Street, London, United Kingdom, EC2R 8AY, E-Mail: contact@evatost.com

We act as UK/EU representative for cross-border sellers and are not manufacturers, importers, or distributors. We are not responsible for any after-sales services. In case of product quality or infringement issues, the manufacturer, importer, or seller shall be solely held responsible.

Recycling Information:

• FR: This device, its accessories, cords, and batteries are recyclable. Deposit at store or waste disposal site. Collection points at www.quefairedemesdechets.fr. Prioritize repair or donation.
• FR: Packaging elements to be separated and deposited in the recycling bin.

1. Charging and Activation

a. Connect the TX2 charging cable to a 5V-1A adapter and plug it in. Ensure the cable aligns correctly with the metal contact pins on the back of the watch. The built-in magnets will automatically attach to the correct poles for charging.

b. If the watch is new or has not been used for a long time, the battery might be in a 0-volt protection state. Charge the watch for at least 15 minutes to gather enough energy to activate it. The built-in magnets will automatically attach to the correct poles for charging.

c. It is recommended to charge the device once a month. Keep the device fully charged and turn it off when not in use to ensure longevity and optimal performance.

2. App Download

① Download the "FitCloudPro" app from the App Store or Google Play.

② Scan the QR code to download.

[Description: QR code for app download, icons for App Store and Google Play.]

Watch Button Functions:

• Short press for Menu, long press for 3 seconds to Open/Close.
• Short press for Back/Turn off display, long press for Voice Assistant.
• Short press to turn flashlight on/off, long press for Timer.

3. Pairing the Watch - iOS

a. On first use of the FitCloudPro app, enable access to Bluetooth, wireless data, and notifications on your compatible smartphone by granting all required permissions via your phone's settings.

[Description: iOS pop-up requesting Bluetooth permission: "FitCloudPro" Would Like to Use Bluetooth. The App will use your bluetooth peripheral rights to pair with the bracelet device. Options: Don't Allow, OK.]

[Description: iOS pop-up requesting notification permission: "FitCloudPro" Would Like to Send You Notifications. Notifications may include alerts, sounds, and icon badges. These can be configured in Settings. Options: Don't Allow, Allow.]

b. Use the app by selecting "Visit as Guest" or "Sign In".

[Description: iOS pop-up requesting wireless data access: Allow "FitCloudPro" to use wireless data? Some functionality may not work when wireless data is turned off. Options: WLAN & Cellular, WLAN Only, Don't Allow.]

4. Bluetooth Connection - iOS

a. Select 'Search Now' to discover and connect to the TX2 Bluetooth device, then tap the watch to 'agree', grant access, and complete the pairing process.

[Description: Screen showing "Bind Smartwatch" and a button "Search Now". Another screen shows "Discover new device..." with TX2 listed. A final pop-up asks "Agree to the phone binding request?". Options: X (Cancel), ✔️ (Agree).]

b. "Allow Bluetooth Pairing" and "Allow Notifications".

[Description: iOS pop-up: "Bluetooth Pairing Request". "TX2" would like to pair with your iPhone. Options: Cancel, Pair. Another pop-up: "Allow TX2 to Receive Your iPhone Notifications?". When connected, all notifications you receive on your iPhone will also be sent to TX2 and may be shown on its display. Options: Don't Allow, Allow.]

5. Setting up the FitCloudPro App on Android

a. "Agree" to the FitCloudPro Privacy Policy & User Agreement, Sign In, or Use without an account.

[Description: Android app welcome screen and sign-in screen with fields for Mobile Phone/Email and Password.]

b. Enter your personal information and allow Bluetooth search/connection in the vicinity.

[Description: Android profile setup screen with fields for Nickname, Birthday, Sex, Height, Weight. A subsequent screen asks "Following permissions are required: Do you want to request for the next step? Nearby devices - Used to search/connect nearby devices. Options: CANCEL, OK.]

c. Allow FitCloudPro to discover and connect to TX2 devices. Tap the watch and select 'Agree' to grant access and complete the pairing process.

[Description: Android screen showing "Allow FitCloudPro to find, connect to, and determine the relative position of nearby devices?" with options Allow/Don't allow. Another screen shows "TX2 Connecting..." with a prompt to keep the watch and phone within 0.5 meters. A final pop-up asks "Agree to the phone binding request?".]

d. Allow Bluetooth pairing requests and access to contacts.

[Description: Android screen showing "Bluetooth pairing request: Pair with TX2?". Options: Cancel, Pair. Another screen asks "Allow access to contacts?". A Bluetooth device (TX2) wants to access your contacts and call history. This includes data about incoming and outgoing calls. You've never connected to TX2 before. Options: Deny, Allow.]

6. Activating Push Notifications

a. Note that the watch cannot receive notifications if the phone is in "Do Not Disturb" mode.

b. Ensure Bluetooth is active on the mobile phone, the FitCloudPro app is running, and the watch is connected via Bluetooth.

c. Ensure notifications are visible in your phone's notification bar.

[Description: Screen showing Push Notification settings with toggles for Call, SMS, Email, WeChat, QQ, Facebook, X, WhatsApp, LinkedIn. Also shows ALERTS settings for Lock Screen, Notification Center, Banners, and Banner Style, Sounds, Badges.]

7. Activating Weather Location

Activate the weather report function in the FitCloudPro app to receive weather forecasts.

[Description: Android pop-up asking "Allow 'FitCloudPro' to use your location? App will use your location to track your movements." Options: Allow Once, Allow While Using App, Don't Allow.]

8. Setting the Watch Display Unit

Navigate to "Unit Prefer" in the app settings.

Select preferred units for:

• Length Unit Prefer: Metric System (Meters, Kilometers) or Imperial (Feet, Miles)
• Weight Unit Prefer: Metric System (KG) or Imperial (Pounds)
• Temperature Unit Prefer: Centigrade Degree (C) or Fahrenheit Degree (°F)

9. Setting/Downloading Watch Faces

a. Press and hold the watch face for 2 seconds, then swipe quickly to switch between watch faces.

b. Download watch faces from the FitCloudPro watch face UI market. Note that only one watch face UI can be stored at a time. A new download replaces the previously stored watch face UI.

[Description: Interface showing current watch face and options to access Watchface Store and My Watchface. A grid of various watch face designs is displayed in the store.]

c. Display of Touchscreen Functionality:

[Diagram illustrating touchscreen interactions: From the main watch face, swipe up/down for Control Center, left/right for Menu and Function screens, and down for Messages.]

10. Resetting the Watch

If exercise, sleep, or heart rate data is inaccurate, or if the Bluetooth connection or calling function fails, try resetting the watch as shown below and reconnecting. Alternatively, you can reset or update the firmware via the app.

[Description: Sequence of screens showing: Settings icon, then System icon within Settings, then Reset option within System.]

11. Setting Up Permanent Display (Always-On Display)

a. Tap "Settings" and navigate to "Display".

[Description: Settings screen showing options like Style switch, Display, Battery.]

b. Press "AOD clock" to activate either the "Digital clock" or the "Analog clock".

[Description: Screen showing options for Screen display, Screen time, Raise to wake, AOD clock. Toggles for Shut down, Digital clock, Analog clock.]

REMARK: To prolong battery life, the watch may disable the "Raise to wake" function to reduce unnecessary power consumption when the AOD function is active.

12. Turning Call and Media Audio On/Off

a. Tap to activate or deactivate Bluetooth Calling.

[Description: Transition from a general settings icon to screens showing "Call audio" and "Media audio" toggles.]

b. To prevent the watch from playing media sounds or making/answering calls, simply turn off the media audio and call audio settings.

Connection Status Display:

[Description of three connection status icons: 1. BT call and APP disconnected. 2. APP connected, BT call disconnected. 3. APP connected, BT call connected.]

Note: The watch pairs with the iOS system app, enabling notification reminders even when the app is closed. For Android phones, however, the app must be open to receive notification reminders.

13. Adding and Synchronizing Favorite Contacts

Add contacts to the watch via FitCloudPro.

[Description: Device settings screen showing "Favorite Contacts" option. Another screen shows "Favorite Contacts" with "No Favorite Contact Yet". Buttons for Add and Edit are visible.]

14. Important Safety Tips

a. Do not expose the watch to extreme temperatures such as scorching sunlight or near high-temperature appliances like heaters, ovens, microwaves, or water heaters. High temperatures can lead to battery explosions or other safety incidents.

b. The product contains a non-removable pure cobalt battery. Non-professionals should not disassemble it in case of a safety incident.

c. This product has passed multiple water tests before launch. However, due to different usage methods, internal parts may experience wear, affecting sealing performance. Therefore, wear and use the smartwatch with caution when swimming and diving, but avoid wearing it in saunas or during hot showers.

d. Our products are not medical devices. Heart rate, blood oxygen, sleep, calories, and steps, along with other collected health data, are for reference only and not for clinical use.