Creality Filament Dry Box User Manual
Model: V1.0
Diagram of Filament Dry Box
The diagram illustrates the components of the Creality Filament Dry Box. Key parts include:
- Top Cover
- Spool (User-supplied)
- Screen
- Knob
- Non-slip foot pad
- Case
- Silicone Hole
- Power Connector
- Plug
Operation Guide
- Turn on power: Plug the power cord into the socket and connect the dry box to the power supply. When the screen shows OFF, the dry box is in a standby state.
- Put in Filament: Put filament into the dry box, drag it from the hole, close the top cover, turn the knob clockwise to adjust the working time to 2/4/8 hours. The dry box will start working.
- Process Memory: If there is a power failure during the drying process, it will automatically memorize and display the drying time before the power failure when it is restarted.
Precautions for safe use
- Do not use the product when the power cord and socket are damaged or in contact with water.
- When using the heating function, do not touch water and other flammable materials.
- When not using this product for a long time, please cut off the power to avoid sudden fire.
- Do not use this product in a humid environment.
- Do not let children play with this product.
- If this product is malfunctioning, please turn off the power first and pull out the power plug from the socket. Do not continue to use it, and contact Creality's after-sales service personnel. Do not replace non-original parts or disassemble and repair by yourself.
Product Parameter
| Model | DB-01 |
|---|---|
| Product Dimension | 233*266*99mm |
| Weight | 953g |
| Color | Transparent, White |
| Material | PPS, ABS, PC |
| Craft | Polishing & Sun Pattern |
| Connector | AC100-240V Power Connector |
| Temperature Range | 50°C±10°C |
| Time Range | OFF/2/4/8 hours |
| Screen | Digital Tube (4 digits) |
| Operation | Knob |
| Power | 120W |
| Power Supply | Built-in |
| Input Voltage | AC 100-240V 50/60Hz |
| Filament Diameter | 1.75mm |
| Spool Supported | 1kg Filament Spool |
Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used) and ethical principles, fulfill safety obligations, and strictly prohibit the use of Creality's products or equipment for any illegal purposes. Creality will not be responsible for any violators' legal liability under any circumstance.
SHENZHEN CREALITY 3D TECHNOLOGY CO., LTD.
Add: 18F, JinXiuHongDu Building, Meilong Blvd., Longhua Dist., Shenzhen, China 518131
Official Website: www.creality.com
Tel: +86 755-8523 4565
E-mail: info@creality.com, cs@creality.com
