HOMCOM 839-023 Convertible Chair Bed

Important Information

IMPORTANT: Retain for future reference. Read carefully.

Product Usage

This product is intended for domestic use only.

Instructions for Use:

• Place the chair stably on a flat floor.
• Keep away from open flames or heat sources.
• Avoid overloading the chair.

Precautions Before Assembly:

• Prepare a clean and dry assembly area.
• Verify that the product is not damaged.
• Check that none of the pieces are missing.

Maintenance:

• Clean with a soft fabric.
• Regularly check the seating structure.

Storage Conditions:

• The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.

Safety Warnings

Beware of crushing and cutting hazards during assembly. The manufacturer declines all responsibility in case of damages due to improper installation or environmental factors.

If the seating is fitted with powered seat height adjustments, only trained personnel may replace or repair those components.

Assembly Instructions

Part List

• Part A: Legs (x4)
• Part B: Seat/Backrest Base (x1)
• Part C: Cushion (x1)
• Hardware:
• M8x25mm Screws (x8 + 1 spare)
• Washers (x8 + 1 spare)
• Washers (x8 + 1 spare)
• Allen Key (x1)

Steps:

Step 1: Attaching Legs

Attach Part A (legs) to Part B (seat/backrest base) using screws and washers. Ensure stability.

Step 2: Assembling the Base

Connect the assembled leg structure to the main base of the chair using screws and washers.

Step 3: Adjusting the Backrest

Fold the backrest of the chair by following the indicated mechanism.

Step 4: Converting to Bed

Unfold the chair to convert it into a bed. The mechanism allows for adjustment.

Completion:

The chair is now converted into a bed, with Part C (cushion) placed on top.