Energizer Smart Outdoor Plug Quick Start Guide

Introduction

Thank you for choosing the Energizer® Smart Outdoor Plug. This quick start guide will help you with setup and installation.

Package Includes

• 1 - Smart Outdoor Plug
• 1 - Quick Start Guide

Pair the Smart Outdoor Plug

Step 1: Download the Energizer Connect App

Download the Energizer Connect app from the App Store (for iPhones) or Google Play Store (for Android phones). Before opening the app, ensure your phone is connected to the WiFi network where the Smart Outdoor Plug will be placed.

[Download on the App Store]

[GET IT ON Google Play]

Step 2: Create an Account

Open the app and create an account by following the on-screen instructions. The app interface shows fields for Phone/Email and Password, with a "Next" button.

Step 3: Plug In and Check Indicator

Plug the Smart Outdoor Plug into a wall outlet. Note: The Smart Outdoor Plug is not suitable for appliances or machinery requiring more than 15 amps per outlet. Check the device's electrical requirements before plugging in.

Important Mounting Notes: To maintain raintight rating, the Smart Outdoor Plug must be mounted with the outlets facing down and at least 55 inches (1.4m) above ground level. Do not place flat on the ground, submerge in water, or mount with outlets facing up.

Confirm that the indicator light on the plug is rapidly blinking (about 4 times per second) for EZ pairing mode. If it is not, press and hold the power/reset button [Power/Reset Button] for 5-10 seconds to enter pairing mode.

Pairing Modes: EZ mode: Indicator light rapidly blinking (approx. 4 times/sec) for easy setup. AP Mode: Indicator light slowly blinking (approx. 2 times/sec) for a secondary setup process requiring more steps.

Step 4: Add Device

After logging in, tap the "+" icon [Add Icon] in the top right corner of the screen and select "Add Device".

Step 5: Select Plug Type

Select "Plug" from the list of device types. The Energizer Connect app shows options like Color Bulb, Doorbell, Door Sensor, LED Strip, Motion Sensor, Plug, Power Strip, and Water Sensor.

Step 6: Connect to Wi-Fi

Confirm that the displayed WiFi network is your 2.4GHz network. Enter your WiFi password and tap "Confirm". Note: Energizer Connect devices only work on a 2.4GHz WiFi network.

Step 7: Finish Device Setup

Your Smart Outdoor Plug will connect to the network. Confirm the settings for your device and then tap "Finish Device Setup". The app shows a "Connecting Now" progress indicator.

Integrate with Voice Assistants

To enable voice access, link the Energizer Connect skill with your chosen voice assistant.

Voice Activation for Alexa

1. Ensure your Alexa device is installed and set up.
2. Open your Alexa app.
3. Open the menu, search for "Skills & Games", and select "Energizer Connect".
4. Authorize your account using the username and password from your Energizer Connect app.
5. Use the name assigned to your plug to control it, e.g., "Alexa, turn on outdoor plug".

Voice Activation for Google Assistant

1. Ensure your Google Assistant device is installed and set up.
2. Open your Google Home app.
3. Tap "+" [Add Icon] to add a new device, then select "Set up a device".
4. Tap "Have something already set up?" and search for "Energizer Connect".
5. Authorize your account using the username and password from your Energizer Connect app.
6. Use the name assigned to your plug to control it, e.g., "Ok Google, turn on outdoor plug".

Usage and Troubleshooting

Your Energizer Smart Outdoor Plug is now ready. You can set schedules, timers, and control your plug remotely via the app.

For frequently asked questions and instruction videos, visit www.energizerconnect.com.

Troubleshooting: To reset or troubleshoot your Smart Outdoor Plug, press and hold the power/reset button [Power/Reset Button] for 5-10 seconds.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Statement: To satisfy FCC's RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance are not recommended.