GAMEMAX Glacier 240/360 LCD Liquid CPU Cooler
Parts Identification
Please assemble by using only the supplied parts.
A1: 240mm LCD Liquid Cooler x1
A2: 360mm LCD Liquid Cooler x1
B: Intel Backplate x1
C: Intel Bracket x2
D: AMD Bracket x2
E: Thermal Paste x1
G1: Screw x4
G2: AMD Bracket Screw x4
G3: Intel Screw (Compatible with LGA115X, LGA1200, LGA1700) x4
G4: LGA 2011 Stud x4
G5: Case Screws (240mm Liquid Cooler x8, 360mm Liquid Cooler x12)
G6: 3.95 inch LCD Display x1
Installation Instructions
Step 1: Remove the protection film / Applying thermal paste
Prepare the CPU and cooler by removing any protective films and applying thermal paste.
Step 2: LGA 115X/1200/1700/1851 Branch
Install the appropriate Intel backplate (B) and bracket (G3) for your motherboard socket (LGA 115X/1200 or LGA 1700/1851).
Step 3: Secure the cooler-Intel LGA 115X/1200/1700/1851
Attach the cooler assembly to the motherboard using the provided screws (G1).
Step 4: LGA 2011 Branch
Remove the original standoffs and install the LGA 2011 studs (G4).
Step 5: Secure the cooler-Intel LGA 2011
Attach the cooler assembly to the motherboard using the provided screws (G1).
Step 5: AM4/5 Branch Step1 & Step2
For AMD platforms, install the AMD brackets (D) and secure the cooler using AMD bracket screws (G2).
Step 6: Connect the cables
Connect the fan cables to the motherboard's CPU_FAN socket and the ARGB cables to the 5V 3PIN ARGB header. Connect the pump unit's 4-pin connector to the AIO/PUMP socket on the motherboard.
Step 7: Modular Magnetic LCD Screen
The LCD screen is modular and can be connected separately using a Type-C cable to function as a DIY secondary chassis display. Important: Do not connect both the pump head's USB cable and the screen's Type-C cable simultaneously to prevent screen damage.
Step 8: Secure the fans and radiator
Mount the radiator and fans to the computer case. Connect the display harness to a USB 2.0 interface on the motherboard. Ensure correct orientation when plugging into the USB 2.0 port.