Analog to Digital Audio Converter
Quick Installation Guide
Introduction
The Analog to Digital Audio Converter allows you to convert analog L/R stereo audio to digital.
Key Features and Benefits
- Converts analog L/R stereo audio input to Coaxial or Toslink digital output simultaneously
- Supports uncompressed 2-channel LPCM digital audio output
- Supports audio sampling rate at 48KHz
- Provides electromagnetic-noise-free transmission
- Metal housing for better RF shielding
Serial Number Sticker
For future product return or exchange, this serial number is required. Please keep it for your reference.
[Serial Number Input Field] [Recycling Symbol]
Package Contents
- Analog to Digital Audio Converter
- Power adapter
- Quick installation guide
Layout
Figure 1: Input
The input side of the converter shows a "DC/5V" power jack and "R/L" RCA input connectors.
Figure 2: Output
The output side of the converter shows a "Toslink" optical digital audio output port, a "Coaxial" digital audio output port, and a "Power LED" indicator.
Hardware Installation
- Power off all devices you plan to connect to this converter.
- Connect your audio source to the converter's Input connector using a R/L cable (not included).
- Connect your A/V receiver or amplifier to the converter's Output connectors using a Toslink or Coaxial cable (not included).
- Connect the converter's power adapter.
- Turn on the A/V receiver or amplifier, then the audio source.
- The Analog to Digital Audio Converter is now ready to use.
Technical Support and Warranty
Support
For questions, visit SIIG's Online Support at www.siig.com and click Support. The online support database is updated daily with new drivers and solutions. Questions can also be submitted online for a prompt response from a technical support analyst.
Warranty
SIIG offers a 3-year manufacturer warranty with this product. This warranty covers the original purchaser and guarantees the product to be free of any defects in materials or workmanship for three (3) years from the date of purchase. SIIG will, at its discretion, repair or replace defective products. This warranty provides specific legal rights, and other rights may vary by state. More warranty details are available on the SIIG website.
Troubleshooting and Returns
If you encounter any problems with this product, follow the procedures below:
A) If within the store's return policy period, return the product to the store where it was purchased.
B) If the store's return policy period has passed, follow these steps for repair or replacement:
Step 1: Submit your RMA request. Go to www.siig.com, click Support, then REQUEST A PRODUCT REPLACEMENT to submit a request to SIIG RMA, or fax a request to 510-657-5962. Your RMA request will be processed, and if the product is determined to be defective, an RMA number will be issued.
Step 2: After obtaining an RMA number, ship the product.
- Properly pack the product for shipping. Include all accessories from the original package.
- Clearly write your RMA number on the top of the returned package. SIIG will refuse any shipping package without an RMA number on the outside of the carton and will not be responsible for such returns.
- You are responsible for the cost of shipping to SIIG. Ship the product to the following address:
- SIIG, Inc.
- 6078 Stewart Avenue
- Fremont, CA 94538-3152, USA
- RMA #: [RMA Number Input Field]
- SIIG will ship the repaired or replaced product via Ground in the U.S. and International Economy outside of the U.S. at no cost to the customer.
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions, including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters, that bridge connections between Desktop/Notebook systems and external peripherals. SIIG continues to grow by adding A/V and Digital Signage connectivity solutions to its extensive portfolio. SIIG products offer comprehensive user manuals, user-friendly features, and are backed by an extensive manufacturer warranty. High quality control standards are evident in the ease of installation and compatibility of its products, as well as one of the lowest defective return rates in the industry. SIIG products are available in computer retail stores, mail order catalogs, through major distributors, system integrators, and VARs in the Americas and the UK, and through e-commerce sites.
Product Information
PRODUCT NAME: Analog to Digital Audio Converter
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Party Responsible for Product Compliance
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: 510-657-8688
