Power Supply Instructions
Models 805-016 (3A) 805-022 (3A) and 805-025 (10A)
Installation
These power supplies are filtered and regulated at 13.8 volts DC. They are particularly suited for audio/video applications in indoor environments.
The Wall Mounting Bracket
If mounting on a wall or other vertical surface is desired, remove the two rubber feet closest to the output terminals and use the screws to install the mounting bracket in the holes where the feet were attached. Use the two larger screws provided to hang the power supply on a vertical surface such as wood or metal. Metal anchors will be required if the supply is to be mounted on a drywall surface.
Diagram Description: The diagram shows a rectangular power supply unit with two terminals and a "POWER" switch on top. A metal mounting bracket is depicted being attached to the side of the unit, aligning with holes where rubber feet were removed. The bracket has openings designed for wall mounting.
Grounding
Equipment powered by this supply receives an earth ground through the wire connecting the black negative output terminal and the chassis, which is earth grounded through its power cord.
