Product Lineup
- CAPTA: Cased with Internal TXV
- CSCT: Cased with Internal TXV
- CAPFA: Cased
- CHPTA: Cased with Internal TXV
- CHPEA: Horizontal "A" with EEV
- CAPEA & CAHEA: Cased with internal EEV
- CAUTA: Uncased with TXV
- CAHEA: Cased with internal EEV
Standard Features
- All-Aluminum evaporator coil
- Optimized for use with R-32 refrigerant, including circuits and manifolds
- R-32 sensor designed for the life span of the coil
- CAPTA, CHPTA, CAUTA models feature factory-installed thermal expansion valves for cooling and heat pump applications.
- CSCT models feature a factory-installed thermal expansion valve for cooling applications.
- CAPEA, CHPEA, and CAHEA models feature:
- Factory-installed electronic expansion valve (EEV) for precise refrigerant control
- Compatibility with Daikin One+ smart thermostat and other Daikin communicating equipment
- Cooling and heat pump applications
- Fault recall of six most recent faults
- CAPFA models feature optimized metering devices (piston).
- Standardized copper suction tube stub length
- Vertical and horizontal models available
- 21" depth for easier attic access
- CAPFA, CAPTA, CHPTA, CAPEA, and CHPEA include single front access panel
- Foil-faced insulation covers the internal casing to reduce cabinet condensation
- Galvanized, leather grain-embossed finish
- Rust resistant, thermoplastic drain pans featuring a low water-retention design
- DecaBDE-free thermoplastic drain pan with secondary drain connections
- Drain pan rails designed to remove and reposition coils with ease without compromising structural integrity
- UV-resistant drain pan
- AHRI certified; ETL listed
Important Note: Do not use these coils on oil furnaces or in applications where the drain pan temperature may exceed 300°F. If applied in such conditions, replace the factory-installed drain pan with a high-temperature drain pan kit (available as a field-installed accessory).
Product Nomenclature
The product nomenclature follows a specific structure to identify model characteristics:
| Position | Code | Description |
|---|
| 1-2 | C | Indoor Coil |
| 3 | A | Application: Upflow/Downflow Coil |
| H | Application: Horizontal "A" Coil |
| S | Application: Horizontal Slab Coil |
| 4 | P | Cabinet Finish: Cased - Painted |
| C | Cabinet Finish: Cased - Unpainted |
| H | Cabinet Finish: High Efficiency All Climate - Painted |
| 5 | T | Expansion Device: TXV |
| E | Expansion Device: Electronic Expansion Valve |
| 6-7 | 18 | Nominal Capacity: 1.5 Tons |
| 24 | Nominal Capacity: 2 Tons |
| 30 | Nominal Capacity: 2.5 Tons |
| 36 | Nominal Capacity: 3 Tons |
| 42 | Nominal Capacity: 3.5 Tons |
| 60 | Nominal Capacity: 5 Tons |
| 8-9 | 14 | CA & CS Series Width / CH Series Height: 14" |
| 17½ | CA & CS Series Width / CH Series Height: 17.5" |
| 21 | CA & CS Series Width / CH Series Height: 21" |
| 24½ | CA & CS Series Width / CH Series Height: 24.5" |
| 10 | A | Coil Configuration (7mm): A Coil |
| 11 | 3 | Refrigerant: R-32 |
| 12-13 | 12" | CA Series Height / CH Series Width / CS Series Depth: 12" Coil |
| 14" | CA Series Height / CH Series Width / CS Series Depth: 14" Coil |
| 18" | CA Series Height / CH Series Width / CS Series Depth: 18" Coil |
| 22" | CA Series Height / CH Series Width / CS Series Depth: 22" Coil |
| 26" | CA Series Height / CH Series Width / CS Series Depth: 26" Coil |
| 30" | CA Series Height / CH Series Width / CS Series Depth: 30" Coil |
| 34" | CA Series Height / CH Series Width / CS Series Depth: 34" Coil |
CAPTA - Cased Upflow/Downflow Indoor Coils
Diagrams: Visual representations show the cased upflow/downflow indoor coil with dimensions labeled for Width (W), Depth (D), and Height (H), along with connection points for Liquid and Suction lines, and drain connections.
| Model | W | D | H | Nominal Tons | Liquid | Suction | Ship Weight (lbs) |
|---|
| CAPTA1818A3 | 14" | 21" | 18" | 1.5 | 3/8" | 3/4" | 30 |
| CAPTA1818B3 | 17½" | 21" | 18" | 1.5 | 3/8" | 3/4" | 35 |
| CAPTA2422A3 | 14" | 21" | 22" | 1.5 - 2 | 3/8" | 3/4" | 37 |
| CAPTA2422B3 | 17½" | 21" | 22" | 1.5 - 2 | 3/8" | 3/4" | 40 |
| CAPTA2422C3 | 21" | 21" | 22" | 1.5 - 2 | 3/8" | 3/4" | 43 |
| CAPTA3022A3 | 14" | 21" | 22" | 2 - 2.5 | 3/8" | 3/4" | 37 |
| CAPTA3022B3 | 17½" | 21" | 22" | 2 - 2.5 | 3/8" | 3/4" | 40 |
| CAPTA3022C3 | 21" | 21" | 22" | 2 - 2.5 | 3/8" | 3/4" | 43 |
| CAPTA3026B3 | 17½" | 21" | 26" | 1.5 - 2.5 | 3/8" | 7/8" | 46 |
| CAPTA3026C3 | 21" | 21" | 26" | 1.5 - 2.5 | 3/8" | 7/8" | 51 |
| CAPTA3626B3 | 17½" | 21" | 26" | 2 - 3 | 3/8" | 7/8" | 48 |
| CAPTA3626C3 | 21" | 21" | 26" | 2 - 3 | 3/8" | 7/8" | 51 |
| CAPTA4230C3 | 21" | 21" | 30" | 2.5 - 3.5 | 3/8" | 7/8" | 66 |
| CAPTA4230D3 | 24½" | 21" | 30" | 2.5 - 3.5 | 3/8" | 7/8" | 70 |
| CAPTA6030C3 | 21" | 21" | 30" | 3.5 - 5 | 3/8" | 7/8" | 66 |
| CAPTA6030D3 | 24½" | 21" | 30" | 3.5 - 5 | 3/8" | 7/8" | 70 |
| CAPTA6034C3 | 21" | 21" | 34" | 4 - 5 | 3/8" | 7/8" | 77 |
| CAPTA6034D3 | 24.5" | 21" | 34" | 4 - 5 | 3/8" | 7/8" | 80 |
CHPTA - Cased Horizontal Indoor Coils
Diagrams: Show the physical layout and dimensions of the CHPTA cased horizontal indoor coils, including cabinet dimensions (W, D, H), connection ports, and drain connections.
| Model | W | D | H | Nominal Tons | Liquid | Suction | Ship Weight (lbs) |
|---|
| CHPTA1822A3 | 22" | 21" | 14" | 1.5 | 3/8" | 3/4" | 46 |
| CHPTA1822B3 | 22" | 21" | 17½" | 1.5 | 3/8" | 3/4" | 50 |
| CHPTA2426B3 | 26" | 21" | 17½" | 1.5 - 2 | 3/8" | 7/8" | 55 |
| CHPTA2426C3 | 26" | 21" | 21" | 1.5 - 2 | 3/8" | 7/8" | 57 |
| CHPTA3026B3 | 26" | 21" | 17½" | 2 - 2.5 | 3/8" | 7/8" | 59 |
| CHPTA3026C3 | 26" | 21" | 21" | 2 - 2.5 | 3/8" | 7/8" | 62 |
| CHPTA3630B3 | 30" | 21" | 17½" | 2.5 - 3 | 3/8" | 7/8" | 66 |
| CHPTA3630C3 | 30" | 21" | 21" | 2.5 - 3 | 3/8" | 7/8" | 70 |
| CHPTA4230C3 | 30" | 21" | 21" | 2.5 - 3.5 | 3/8" | 7/8" | 70 |
| CHPTA4830C3 | 30" | 21" | 21" | 3 - 4 | 3/8" | 7/8" | 78 |
| CHPTA6030D3 | 30" | 21" | 24½" | 4 - 5 | 3/8" | 7/8" | 82 |
CAPFA - Cased Upflow/Downflow Indoor Coils
Diagrams: Depict the physical layout and dimensions of the CAPFA cased upflow/downflow indoor coils, illustrating cabinet dimensions (W, D, H), connection points, and drain connections.
| Model | W | D | H | A | Nominal Tons | Liquid | Suction | Ship Weight (lbs) |
|---|
| CAPFA1818A3 | 14" | 21" | 18" | 14" | 1.5 | 3/8" | 3/4" | 28 |
| CAPFA1818B3 | 17½" | 21" | 18" | 15%" | 1.5 | 3/8" | 3/4" | 34 |
| CAPFA1818C3 | 21" | 21" | 18" | 14" | 1.5 | 3/8" | 3/4" | 43 |
| CAPFA2422A3 | 14" | 21" | 22" | 18" | 2 | 3/8" | 3/4" | 42 |
| CAPFA2422B3 | 17½" | 21" | 22" | 18" | 2 | 3/8" | 3/4" | 42 |
| CAPFA2422C3 | 21" | 21" | 22" | 18" | 2 | 3/8" | 3/4" | 42 |
| CAPFA3022A3 | 14" | 21" | 22" | 18" | 2.5 | 3/8" | 3/4" | 36 |
| CAPFA3022B3 | 17½" | 21" | 22" | 18" | 2.5 | 3/8" | 3/4" | 42 |
| CAPFA3022C3 | 21" | 21" | 22" | 18" | 2.5 | 3/8" | 3/4" | 42 |
| CAPFA3022D3 | 24½" | 21" | 22" | 18" | 2.5 | 3/8" | 3/4" | 53 |
| CAPFA3626B3 | 17½" | 21" | 26" | 22" | 3 | 3/8" | 7/8" | 46 |
| CAPFA3626C3 | 21" | 21" | 26" | 22" | 3 | 3/8" | 7/8" | 50 |
| CAPFA3626D3 | 24½" | 21" | 26" | 22" | 3 | 3/8" | 7/8" | 61 |
| CAPFA4226B3 | 17½" | 21" | 26" | 22" | 3.5 | 3/8" | 7/8" | 46 |
| CAPFA4226C3 | 21" | 21" | 26" | 22" | 3.5 | 3/8" | 7/8" | 50 |
| CAPFA4226D3 | 24½" | 21" | 26" | 22" | 3.5 | 3/8" | 7/8" | 61 |
| CAPFA6030C3 | 21" | 21" | 30" | 26" | 4 | 3/8" | 7/8" | 66 |
| CAPFA6030D3 | 24½" | 21" | 30" | 26" | 5 | 3/8" | 7/8" | 69 |
CAPEA - Cased Upflow/Downflow Indoor Coils
Diagrams: Show the physical layout and dimensions of the CAPEA cased upflow/downflow indoor coils, including cabinet dimensions (W, D, H), connection ports, and drain connections.
| Model | W | D | H | Nominal Tons | Liquid | Suction | Ship Weight (lbs) |
|---|
| CAPEA2418B3 | 17½" | 21 | 18 | 2 | 5/16" or 3/8" | 5/8" or 3/4" | 43 |
| CAPEA2418C3 | 21 | 21 | 18 | 2 | 5/16" or 3/8" | 5/8" or 3/4" | 45 |
| CAPEA3022B3 | 17½" | 21 | 22 | 2.5 | 5/16" or 3/8" | 3/4" or 7/8" | 48 |
| CAPEA3022C3 | 21 | 21 | 22 | 2.5 | 5/16" or 3/8" | 3/4" or 7/8" | 51 |
| CAPEA3626B3 | 17½" | 21 | 26 | 3 | 5/16" or 3/8" | 3/4" or 7/8" | 54 |
| CAPEA3626C3 | 21 | 21 | 26 | 3 | 5/16" or 3/8" | 3/4" or 7/8" | 57 |
| CAPEA3626D3 | 24½" | 21 | 26 | 3 | 5/16" or 3/8" | 3/4" or 7/8" | 62 |
| CAPEA4830C3 | 21 | 21 | 30 | 4 | 3/8" | 7/8" or 1 1/8" | 68 |
| CAPEA4830D3 | 24½" | 21 | 30 | 4 | 3/8" | 7/8" or 1 1/8" | 70 |
| CAPEA6030C3 | 21 | 21 | 30 | 5 | 3/8" | 7/8" or 1 1/8" | 75 |
| CAPEA6030D3 | 24½" | 21 | 30 | 5 | 3/8" | 7/8" or 1 1/8" | 78 |
CHPEA - Cased Horizontal Indoor Coils
Diagrams: Illustrate the physical layout and dimensions of the CHPEA cased horizontal indoor coils, showing cabinet dimensions (W, D, H), connection ports, and drain connections.
| Model | W | D | H | Nominal Tons | Liquid | Suction | Ship Weight (lbs) |
|---|
| CHPEA2422B3 | 22" | 21" | 17½" | 2 | 5/16" or 3/8" | 5/8" or 3/4" | 56 |
| CHPEA3026B3 | 26" | 21" | 17½" | 2.5 | 5/16" or 3/8" | 3/4" or 7/8" | 63 |
| CHPEA3026C3 | 26" | 21" | 21" | 2.5 | 5/16" or 3/8" | 3/4" or 7/8" | 67 |
| CHPEA3626B3 | 26" | 21" | 17½" | 3 | 5/16" or 3/8" | 3/4" or 7/8" | 68 |
| CHPEA3626C3 | 26" | 21" | 21" | 3 | 5/16" or 3/8" | 3/4" or 7/8" | 70 |
| CHPEA4830C3 | 30" | 21" | 21" | 4 | 3/8" | 7/8" or 1 1/8" | 76 |
| CHPEA4830D3 | 30" | 21" | 24½" | 4 | 3/8" | 7/8" or 1 1/8" | 78 |
| CHPEA6030C3 | 30" | 21" | 21" | 5 | 3/8" | 7/8" or 1 1/8" | 76 |
| CHPEA6030D3 | 30" | 21" | 24½" | 5 | 3/8" | 7/8" or 1 1/8" | 78 |
CSCT - Cased Horizontal Slab Indoor Coils
Diagrams: Provide visual representations of the CSCT cased horizontal slab indoor coils, detailing cabinet dimensions (W, D, H), plenum opening dimensions, coil dimensions, service valve locations, and ship weight.
| Model | Cabinet Dimensions W | D | H | Plenum Opening W | H | Nominal Tons | Coil Dimensions W | H | Service Valve Liquid | Suction | Ship Weight (lbs) |
|---|
| CSCT2412S3 | 25½" | 12" | 25" | 16" | 21" | 1.5 - 2 | 20" | 24" | 3/8" | 3/4" | 35 |
| CSCT3012M3 | 33½" | 12" | 25" | 24" | 21" | 2 - 2.5 | 28" | 24" | 3/8" | 7/8" | 42 |
| CSCT3612L3 | 39½" | 12" | 25" | 30" | 21" | 2.5 - 3 | 34" | 24" | 3/8" | 7/8" | 53 |
| CSCT6012L3 | 39½" | 12" | 25" | 30" | 21" | 4 - 5 | 34" | 24" | 3/8" | 7/8" | 58 |
CAUTA - Uncased with TXV
Diagrams: Show the physical layout and dimensions of the CAUTA uncased indoor coils, including cabinet dimensions (W, D, H), connection ports, and drain connections.
| Model | W | D | H | Nominal Tons | Liquid | Suction | Ship Weight (lbs) |
|---|
| CAUTA1818A3 | 13" | 21½" | 15" | 1.5 | 3/8" | 3/4" | 22 |
| CAUTA1818B3 | 16½" | 21½" | 15" | 1.5 | 3/8" | 3/4" | 24 |
| CAUTA2422A3 | 13" | 21½" | 18%" | 1.5 - 2 | 3/8" | 3/4" | 25 |
| CAUTA2422B3 | 16½" | 21½" | 18%" | 1.5 - 2 | 3/8" | 3/4" | 28 |
| CAUTA2422C3 | 20" | 21½" | 18%" | 1.5 - 2 | 3/8" | 3/4" | 30 |
| CAUTA3022A3 | 13" | 21½" | 18%" | 2 - 2.5 | 3/8" | 3/4" | 25 |
| CAUTA3022B3 | 16½" | 21½" | 18%" | 2 - 2.5 | 3/8" | 3/4" | 28 |
| CAUTA3022C3 | 20" | 21½" | 18%" | 2 - 2.5 | 3/8" | 3/4" | 30 |
| CAUTA3026B3 | 16.5" | 21½" | 22%" | 1.5 - 2.5 | 3/8" | 7/8" | 30 |
| CAUTA3026C3 | 20" | 21½" | 22%" | 1.5 - 2.5 | 3/8" | 7/8" | 34 |
| CAUTA3626B3 | 16½" | 21½" | 24%" | 2 - 3 | 3/8" | 7/8" | 33 |
| CAUTA3626C3 | 20" | 21½" | 239/10" | 2 - 3 | 3/8" | 7/8" | 35 |
| CAUTA4230C3 | 20" | 21½" | 27" | 2.5 - 3.5 | 3/8" | 7/8" | 38 |
| CAUTA4230D3 | 23½" | 21½" | 27%" | 2.5 - 3.5 | 3/8" | 7/8" | 40 |
| CAUTA6030C3 | 20" | 21½" | 27½" | 3.5 - 5 | 3/8" | 7/8" | 43 |
| CAUTA6030D3 | 23½" | 21½" | 27" | 3.5 - 5 | 3/8" | 7/8" | 46 |
CAHEA - Multi-position Cold Climate Indoor Coils
Diagrams: Illustrate the physical layout and dimensions of the CAHEA multi-position cold climate indoor coils, showing cabinet dimensions (W, D, H), connection ports, and drain connections.
| Model | Cabinet Dimensions W | D | H | Nominal Capacity Range (tons) | Liquid | Suction | Ship Weight (lbs) |
|---|
| CAHEA3630C3 | 21" | 21" | 30" | 2, 3, 5 | 5/16 or 3/8" | 3/4 or 7/8" | 58 |
Airflow Data
The following tables provide airflow data (Air Quantity in SCFM) versus Pressure Drop (in. WC) for various models under wet and dry conditions.
Airflow Data for CAPTA
| SCFM | 400 | 500 | 600 | 700 | 800 | 900 | 1000 | 1100 | 1200 | 1300 | 1400 | 1500 | 1600 | 1700 | 1800 | 1900 | 2000 | 2100 | 2200 |
|---|
| CAPTA1818A3** Wet | 0.080 | 0.135 | 0.205 | 0.275 | 0.346 | 0.422 | 0.516 | 0.620 | 0.715 | - | - | - | - | - | - | - | - | - | - |
| CAPTA1818A3** Dry | 0.074 | 0.115 | 0.180 | 0.239 | 0.297 | 0.368 | 0.443 | 0.543 | 0.638 | - | - | - | - | - | - | - | - | - | - |
| CAPTA1818B3** Wet | 0.067 | 0.106 | 0.165 | 0.215 | 0.261 | 0.317 | 0.372 | 0.425 | 0.482 | - | - | - | - | - | - | - | - | - | - |
| CAPTA1818B3** Dry | 0.050 | 0.087 | 0.125 | 0.175 | 0.215 | 0.265 | 0.319 | 0.381 | 0.444 | - | - | - | - | - | - | - | - | - | - |
| CAPTA2422A3** Wet | 0.108 | 0.150 | 0.195 | 0.250 | 0.310 | 0.379 | 0.460 | 0.543 | 0.625 | 0.730 | 0.730 | - | - | - | - | - | - | - | - |
| CAPTA2422A3** Dry | 0.088 | 0.125 | 0.170 | 0.215 | 0.265 | 0.320 | 0.385 | 0.440 | 0.535 | 0.618 | 0.618 | - | - | - | - | - | - | - | - |
| CAPTA2422B3** Wet | 0.090 | 0.130 | 0.150 | 0.220 | 0.250 | 0.310 | 0.369 | 0.436 | 0.508 | 0.584 | 0.584 | - | - | - | - | - | - | - | - |
| CAPTA2422B3** Dry | 0.082 | 0.100 | 0.140 | 0.170 | 0.210 | 0.260 | 0.300 | 0.350 | 0.410 | 0.480 | 0.480 | - | - | - | - | - | - | - | - |
| CAPTA2422C3** Wet | 0.091 | 0.110 | 0.139 | 0.172 | 0.205 | 0.245 | 0.285 | 0.335 | 0.387 | 0.437 | 0.437 | - | - | - | - | - | - | - | - |
| CAPTA2422C3** Dry | 0.069 | 0.084 | 0.111 | 0.133 | 0.162 | 0.185 | 0.210 | 0.250 | 0.295 | 0.330 | 0.330 | - | - | - | - | - | - | - | - |
| CAPTA3022A3** Wet | 0.115 | 0.150 | 0.190 | 0.229 | 0.270 | 0.310 | 0.365 | 0.420 | 0.475 | 0.475 | - | - | - | - | - | - | - | - | - |
| CAPTA3022A3** Dry | 0.096 | 0.122 | 0.150 | 0.183 | 0.215 | 0.252 | 0.292 | 0.334 | 0.382 | 0.382 | - | - | - | - | - | - | - | - | - |
| CAPTA3022B3** Wet | 0.090 | 0.110 | 0.140 | 0.170 | 0.200 | 0.240 | 0.280 | 0.320 | 0.370 | 0.370 | - | - | - | - | - | - | - | - | - |
| CAPTA3022B3** Dry | 0.080 | 0.100 | 0.120 | 0.150 | 0.180 | 0.210 | 0.240 | 0.260 | 0.300 | 0.300 | - | - | - | - | - | - | - | - | - |
| CAPTA3022C3** Wet | 0.134 | 0.167 | 0.204 | 0.245 | 0.290 | 0.338 | 0.389 | 0.444 | 0.485 | 0.485 | - | - | - | - | - | - | - | - | - |
| CAPTA3022C3** Dry | 0.127 | 0.157 | 0.190 | 0.229 | 0.269 | 0.316 | 0.360 | 0.415 | 0.450 | 0.450 | - | - | - | - | - | - | - | - | - |
| CAPTA3026B3** Wet | 0.100 | 0.120 | 0.150 | 0.180 | 0.210 | 0.240 | 0.280 | 0.310 | 0.360 | 0.360 | - | - | - | - | - | - | - | - | - |
| CAPTA3026B3** Dry | 0.080 | 0.100 | 0.130 | 0.150 | 0.170 | 0.200 | 0.230 | 0.270 | 0.300 | 0.300 | - | - | - | - | - | - | - | - | - |
| CAPTA3026C3** Wet | 0.130 | 0.150 | 0.180 | 0.210 | 0.250 | 0.280 | 0.310 | 0.340 | 0.378 | 0.414 | 0.414 | - | - | - | - | - | - | - | - |
| CAPTA3026C3** Dry | 0.110 | 0.132 | 0.156 | 0.181 | 0.208 | 0.237 | 0.270 | 0.300 | 0.335 | 0.372 | 0.372 | - | - | - | - | - | - | - | - |
| CAPTA3626B3** Wet | 0.120 | 0.140 | 0.160 | 0.190 | 0.220 | 0.250 | 0.280 | 0.310 | 0.350 | 0.380 | 0.380 | - | - | - | - | - | - | - | - |
| CAPTA3626B3** Dry | 0.091 | 0.109 | 0.127 | 0.147 | 0.160 | 0.190 | 0.210 | 0.230 | 0.260 | 0.280 | 0.280 | - | - | - | - | - | - | - | - |
| CAPTA3626C3** Wet | 0.150 | 0.174 | 0.210 | 0.240 | 0.270 | 0.310 | 0.350 | 0.400 | 0.440 | 0.490 | 0.540 | 0.600 | 0.660 | - | - | - | - | - | - |
| CAPTA3626C3** Dry | 0.133 | 0.160 | 0.190 | 0.210 | 0.250 | 0.280 | 0.320 | 0.350 | 0.390 | 0.440 | 0.480 | 0.530 | 0.590 | - | - | - | - | - | - |
| CAPTA4230C3** Wet | 0.150 | 0.180 | 0.210 | 0.230 | 0.270 | 0.300 | 0.340 | 0.380 | 0.430 | 0.477 | 0.520 | - | - | - | - | - | - | - | - |
| CAPTA4230C3** Dry | 0.120 | 0.140 | 0.160 | 0.190 | 0.210 | 0.230 | 0.260 | 0.290 | 0.320 | 0.350 | 0.380 | - | - | - | - | - | - | - | - |
| CAPTA4230D3** Wet | 0.140 | 0.160 | 0.190 | 0.220 | 0.260 | 0.300 | 0.340 | 0.380 | 0.420 | 0.460 | 0.510 | 0.560 | 0.610 | - | - | - | - | - | - |
| CAPTA4230D3** Dry | 0.120 | 0.140 | 0.170 | 0.200 | 0.230 | 0.260 | 0.300 | 0.330 | 0.360 | 0.400 | 0.430 | 0.480 | 0.520 | - | - | - | - | - | - |
| CAPTA6030C3** Wet | 0.120 | 0.130 | 0.150 | 0.180 | 0.200 | 0.220 | 0.250 | 0.280 | 0.310 | 0.340 | 0.380 | 0.410 | 0.450 | - | - | - | - | - | - |
| CAPTA6030C3** Dry | 0.090 | 0.100 | 0.120 | 0.140 | 0.160 | 0.180 | 0.210 | 0.230 | 0.260 | 0.280 | 0.310 | 0.340 | 0.370 | - | - | - | - | - | - |
| CAPTA6030D3** Wet | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| CAPTA6030D3** Dry | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| CAPTA6034C3** Wet | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| CAPTA6034C3** Dry | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| CAPTA6034D3** Wet | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| CAPTA6034D3** Dry | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Airflow Data for CHPTA
| SCFM | 400 | 500 | 600 | 700 | 800 | 900 | 1000 | 1100 | 1200 | 1300 | 1400 | 1500 | 1600 | 1700 | 1800 | 1900 | 2000 | 2100 | 2200 |
|---|
| CHPTA1822A3** Wet | 0.095 | 0.151 | 0.215 | 0.284 | 0.354 | 0.429 | 0.519 | 0.601 | - | - | - | - | - | - | - | - | - | - | - |
| CHPTA1822A3** Dry | 0.064 | 0.094 | 0.144 | 0.199 | 0.284 | 0.353 | 0.431 | 0.513 | - | - | - | - | - | - | - | - | - | - | - |
| CHPTA1822B3** Wet | 0.090 | 0.120 | 0.140 | 0.190 | 0.250 | 0.310 | 0.390 | 0.460 | - | - | - | - | - | - | - | - | - | - | - |
| CHPTA1822B3** Dry | 0.080 | 0.110 | 0.130 | 0.180 | 0.230 | 0.290 | 0.360 | 0.430 | - | - | - | - | - | - | - | - | - | - | - |
| CHPTA2426B3** Wet | 0.130 | 0.150 | 0.180 | 0.204 | 0.255 | 0.304 | 0.365 | 0.419 | 0.468 | 0.490 | - | - | - | - | - | - | - | - | - |
| CHPTA2426B3** Dry | 0.100 | 0.120 | 0.150 | 0.170 | 0.210 | 0.240 | 0.290 | 0.330 | 0.410 | 0.460 | - | - | - | - | - | - | - | - | - |
| CHPTA2426C3** Wet | 0.110 | 0.140 | 0.160 | 0.180 | 0.200 | 0.230 | 0.270 | 0.320 | 0.370 | 0.460 | - | - | - | - | - | - | - | - | - |
| CHPTA2426C3** Dry | 0.090 | 0.110 | 0.130 | 0.150 | 0.190 | 0.220 | 0.260 | 0.300 | 0.350 | 0.400 | - | - | - | - | - | - | - | - | - |
| CHPTA3026B3** Wet | 0.110 | 0.150 | 0.180 | 0.230 | 0.280 | 0.320 | 0.370 | 0.430 | 0.490 | 0.490 | - | - | - | - | - | - | - | - | - |
| CHPTA3026B3** Dry | 0.120 | 0.140 | 0.170 | 0.210 | 0.250 | 0.290 | 0.340 | 0.400 | 0.460 | 0.460 | - | - | - | - | - | - | - | - | - |
| CHPTA3026C3** Wet | 0.100 | 0.130 | 0.150 | 0.170 | 0.200 | 0.230 | 0.260 | 0.300 | 0.340 | 0.460 | - | - | - | - | - | - | - | - | - |
| CHPTA3026C3** Dry | 0.060 | 0.080 | 0.110 | 0.130 | 0.150 | 0.174 | 0.198 | 0.229 | 0.259 | 0.259 | - | - | - | - | - | - | - | - | - |
| CHPTA3630B3** Wet | 0.150 | 0.187 | 0.229 | 0.279 | 0.323 | 0.372 | 0.430 | 0.465 | - | - | - | - | - | - | - | - | - | - | - |
| CHPTA3630B3** Dry | 0.128 | 0.153 | 0.191 | 0.237 | 0.285 | 0.330 | 0.377 | 0.428 | - | - | - | - | - | - | - | - | - | - | - |
| CHPTA3630C3** Wet | 0.140 | 0.175 | 0.205 | 0.245 | 0.285 | 0.325 | 0.365 | 0.410 | - | - | - | - | - | - | - | - | - | - | - |
| CHPTA3630C3** Dry | 0.086 | 0.105 | 0.135 | 0.155 | 0.185 | 0.210 | 0.245 | 0.279 | - | - | - | - | - | - | - | - | - | - | - |
| CHPTA4230C3** Wet | 0.140 | 0.175 | 0.205 | 0.245 | 0.285 | 0.325 | 0.365 | 0.410 | - | - | - | - | - | - | - | - | - | - | - |
| CHPTA4230C3** Dry | 0.086 | 0.105 | 0.135 | 0.155 | 0.185 | 0.210 | 0.245 | 0.279 | - | - | - | - | - | - | - | - | - | - | - |
| CHPTA4830C3** Wet | 0.210 | 0.250 | 0.304 | 0.352 | 0.402 | 0.457 | 0.510 | 0.570 | 0.630 | 0.693 | 0.761 | 0.831 | 0.894 | - | - | - | - | - | - |
| CHPTA4830C3** Dry | 0.163 | 0.194 | 0.226 | 0.263 | 0.297 | 0.337 | 0.381 | 0.420 | 0.470 | 0.520 | 0.580 | 0.630 | 0.690 | - | - | - | - | - | - |
| CHPTA6030D3** Wet | 0.161 | 0.189 | 0.221 | 0.254 | 0.292 | 0.332 | 0.370 | 0.413 | 0.461 | 0.502 | - | - | - | - | - | - | - | - | - |
| CHPTA6030D3** Dry | 0.140 | 0.160 | 0.190 | 0.220 | 0.250 | 0.283 | 0.314 | 0.351 | 0.389 | 0.402 | - | - | - | - | - | - | - | - | - |
Airflow Data for CAPFA
| SCFM | 400 | 500 | 600 | 700 | 800 | 900 | 1000 | 1100 | 1200 | 1300 | 1400 | 1500 | 1600 | 1700 | 1800 | 1900 | 2000 | 2100 | 2200 |
|---|
| CAPFA1818A3** Wet | 0.080 | 0.135 | 0.205 | 0.275 | 0.346 | 0.422 | 0.516 | 0.620 | 0.715 | - | - | - | - | - | - | - | - | - | - |
| CAPFA1818A3** Dry | 0.074 | 0.115 | 0.180 | 0.239 | 0.297 | 0.368 | 0.443 | 0.543 | 0.638 | - | - | - | - | - | - | - | - | - | - |
| CAPFA1818B3** Wet | 0.067 | 0.106 | 0.165 | 0.215 | 0.261 | 0.317 | 0.372 | 0.425 | 0.482 | - | - | - | - | - | - | - | - | - | - |
| CAPFA1818B3** Dry | 0.050 | 0.087 | 0.125 | 0.175 | 0.215 | 0.265 | 0.319 | 0.381 | 0.444 | - | - | - | - | - | - | - | - | - | - |
| CAPFA1818C3** Wet | 0.089 | 0.124 | 0.162 | 0.211 | 0.261 | 0.305 | 0.366 | 0.433 | 0.504 | 0.591 | 0.681 | - | - | - | - | - | - | - | - |
| CAPFA1818C3** Dry | 0.070 | 0.101 | 0.132 | 0.171 | 0.205 | 0.253 | 0.300 | 0.350 | 0.400 | 0.460 | 0.525 | - | - | - | - | - | - | - | - |
| CAPFA2422A3** Wet | 0.126 | 0.180 | 0.220 | 0.280 | 0.340 | 0.410 | 0.500 | 0.580 | 0.670 | - | - | - | - | - | - | - | - | - | - |
| CAPFA2422A3** Dry | 0.088 | 0.125 | 0.170 | 0.215 | 0.265 | 0.320 | 0.385 | 0.440 | 0.535 | 0.618 | - | - | - | - | - | - | - | - | - |
| CAPFA2422B3** Wet | 0.117 | 0.167 | 0.211 | 0.257 | 0.309 | 0.360 | 0.430 | 0.470 | 0.540 | - | - | - | - | - | - | - | - | - | - |
| CAPFA2422B3** Dry | 0.082 | 0.100 | 0.140 | 0.170 | 0.210 | 0.260 | 0.300 | 0.350 | 0.410 | - | - | - | - | - | - | - | - | - | - |
| CAPFA2422C3** Wet | 0.135 | 0.165 | 0.195 | 0.235 | 0.277 | 0.324 | 0.365 | 0.430 | - | - | - | - | - | - | - | - | - | - | - |
| CAPFA2422C3** Dry | 0.107 | 0.129 | 0.154 | 0.183 | 0.214 | 0.242 | 0.278 | 0.318 | - | - | - | - | - | - | - | - | - | - | - |
| CAPFA3022A3** Wet | 0.150 | 0.195 | 0.250 | 0.310 | 0.379 | 0.460 | 0.543 | 0.625 | 0.730 | - | - | - | - | - | - | - | - | - | - |
| CAPFA3022A3** Dry | 0.125 | 0.170 | 0.215 | 0.265 | 0.320 | 0.385 | 0.440 | 0.535 | 0.618 | - | - | - | - | - | - | - | - | - | - |
| CAPFA3022B3** Wet | 0.130 | 0.150 | 0.220 | 0.250 | 0.310 | 0.369 | 0.436 | 0.508 | 0.584 | - | - | - | - | - | - | - | - | - | - |
| CAPFA3022B3** Dry | 0.100 | 0.140 | 0.170 | 0.210 | 0.260 | 0.300 | 0.350 | 0.410 | 0.480 | - | - | - | - | - | - | - | - | - | - |
| CAPFA3022C3** Wet | 0.110 | 0.139 | 0.172 | 0.205 | 0.245 | 0.285 | 0.335 | 0.387 | 0.437 | - | - | - | - | - | - | - | - | - | - |
| CAPFA3022C3** Dry | 0.084 | 0.111 | 0.133 | 0.162 | 0.185 | 0.210 | 0.250 | 0.295 | 0.330 | - | - | - | - | - | - | - | - | - | - |
| CAPFA3022D3** Wet | 0.135 | 0.165 | 0.198 | 0.230 | 0.272 | 0.312 | 0.361 | 0.413 | - | - | - | - | - | - | - | - | - | - | - |
| CAPFA3022D3** Dry | 0.110 | 0.135 | 0.165 | 0.190 | 0.220 | 0.255 | 0.290 | 0.330 | - | - | - | - | - | - | - | - | - | - | - |
| CAPFA3626B3** Wet | 0.150 | 0.195 | 0.250 | 0.310 | 0.379 | 0.460 | 0.543 | 0.625 | 0.730 | 0.730 | - | - | - | - | - | - | - | - | - |
| CAPFA3626B3** Dry | 0.125 | 0.170 | 0.215 | 0.265 | 0.320 | 0.385 | 0.440 | 0.535 | 0.618 | 0.618 | - | - | - | - | - | - | - | - | - |
| CAPFA3626C3** Wet | 0.130 | 0.150 | 0.220 | 0.250 | 0.310 | 0.369 | 0.436 | 0.508 | 0.584 | 0.584 | - | - | - | - | - | - | - | - | - |
| CAPFA3626C3** Dry | 0.100 | 0.140 | 0.170 | 0.210 | 0.260 | 0.300 | 0.350 | 0.410 | 0.480 | 0.480 | - | - | - | - | - | - | - | - | - |
| CAPFA3626D3** Wet | 0.110 | 0.139 | 0.172 | 0.205 | 0.245 | 0.285 | 0.335 | 0.387 | 0.437 | 0.437 | - | - | - | - | - | - | - | - | - |
| CAPFA3626D3** Dry | 0.084 | 0.111 | 0.133 | 0.162 | 0.185 | 0.210 | 0.250 | 0.295 | 0.330 | 0.330 | - | - | - | - | - | - | - | - | - |
| CAPFA4226B3** Wet | 0.115 | 0.150 | 0.190 | 0.229 | 0.270 | 0.310 | 0.365 | 0.420 | 0.475 | 0.475 | - | - | - | - | - | - | - | - | - |
| CAPFA4226B3** Dry | 0.096 | 0.122 | 0.150 | 0.183 | 0.215 | 0.252 | 0.292 | 0.334 | 0.382 | 0.382 | - | - | - | - | - | - | - | - | - |
| CAPFA4226C3** Wet | 0.090 | 0.110 | 0.140 | 0.170 | 0.200 | 0.240 | 0.280 | 0.320 | 0.370 | 0.370 | - | - | - | - | - | - | - | - | - |
| CAPFA4226C3** Dry | 0.080 | 0.100 | 0.120 | 0.150 | 0.180 | 0.210 | 0.240 | 0.260 | 0.300 | 0.300 | - | - | - | - | - | - | - | - | - |
| CAPFA4226D3** Wet | 0.134 | 0.167 | 0.204 | 0.245 | 0.290 | 0.338 | 0.389 | 0.444 | 0.485 | 0.485 | - | - | - | - | - | - | - | - | - |
| CAPFA4226D3** Dry | 0.127 | 0.157 | 0.190 | 0.229 | 0.269 | 0.316 | 0.360 | 0.415 | 0.450 | 0.450 | - | - | - | - | - | - | - | - | - |
| CAPFA6030C3** Wet | 0.100 | 0.120 | 0.150 | 0.180 | 0.210 | 0.240 | 0.280 | 0.310 | 0.360 | 0.360 | - | - | - | - | - | - | - | - | - |
| CAPFA6030C3** Dry | 0.080 | 0.100 | 0.130 | 0.150 | 0.170 | 0.200 | 0.230 | 0.270 | 0.300 | 0.300 | - | - | - | - | - | - | - | - | - |
| CAPFA6030D3** Wet | 0.130 | 0.150 | 0.180 | 0.210 | 0.250 | 0.280 | 0.310 | 0.340 | 0.378 | 0.414 | 0.414 | - | - | - | - | - | - | - | - |
| CAPFA6030D3** Dry | 0.110 | 0.132 | 0.156 | 0.181 | 0.208 | 0.237 | 0.270 | 0.300 | 0.335 | 0.372 | 0.372 | - | - | - | - | - | - | - | - |
Airflow Data for CAPEA
| SCFM | 400 | 500 | 600 | 700 | 800 | 900 | 1000 | 1100 | 1200 | 1300 | 1400 | 1500 | 1600 | 1700 | 1800 | 1900 | 2000 | 2100 | 2200 |
|---|
| CAPEA2418B3** Wet | 0.076 | 0.106 | 0.137 | 0.215 | 0.261 | 0.317 | 0.422 | 0.505 | 0.591 | 0.676 | 0.768 | - | - | - | - | - | - | - | - |
| CAPEA2418B3** Dry | 0.050 | 0.087 | 0.125 | 0.175 | 0.215 | 0.265 | 0.319 | 0.381 | 0.444 | 0.511 | 0.584 | - | - | - | - | - | - | - | - |
| CAPEA2418C3** Wet | 0.089 | 0.124 | 0.162 | 0.211 | 0.261 | 0.305 | 0.366 | 0.433 | 0.504 | 0.591 | 0.681 | - | - | - | - | - | - | - | - |
| CAPEA2418C3** Dry | 0.070 | 0.101 | 0.132 | 0.171 | 0.205 | 0.253 | 0.300 | 0.350 | 0.400 | 0.460 | 0.525 | - | - | - | - | - | - | - | - |
| CAPEA3022B3** Wet | 0.084 | 0.117 | 0.155 | 0.199 | 0.260 | 0.310 | 0.390 | 0.470 | 0.530 | 0.608 | 0.691 | 0.750 | - | - | - | - | - | - | - |
| CAPEA3022B3** Dry | 0.047 | 0.071 | 0.099 | 0.161 | 0.162 | 0.204 | 0.248 | 0.296 | 0.344 | 0.398 | 0.456 | 0.549 | - | - | - | - | - | - | - |
| CAPEA3022C3** Wet | 0.069 | 0.091 | 0.110 | 0.139 | 0.172 | 0.205 | 0.245 | 0.285 | 0.335 | 0.387 | 0.437 | 0.492 | - | - | - | - | - | - | - |
| CAPEA3022C3** Dry | 0.050 | 0.069 | 0.084 | 0.111 | 0.133 | 0.162 | 0.185 | 0.210 | 0.250 | 0.295 | 0.330 | 0.375 | - | - | - | - | - | - | - |
| CAPEA3626B3** Wet | 0.054 | 0.077 | 0.104 | 0.134 | 0.169 | 0.207 | 0.250 | 0.314 | 0.374 | 0.412 | 0.477 | 0.511 | 0.576 | - | - | - | - | - | - |
| CAPEA3626B3** Dry | 0.054 | 0.074 | 0.096 | 0.122 | 0.150 | 0.183 | 0.215 | 0.252 | 0.292 | 0.334 | 0.382 | 0.409 | - | - | - | - | - | - | - |
| CAPEA3626C3** Wet | 0.050 | 0.070 | 0.090 | 0.110 | 0.140 | 0.170 | 0.200 | 0.240 | 0.280 | 0.320 | 0.370 | - | - | - | - | - | - | - | - |
| CAPEA3626C3** Dry | 0.040 | 0.060 | 0.080 | 0.100 | 0.120 | 0.150 | 0.180 | 0.210 | 0.240 | 0.260 | 0.300 | - | - | - | - | - | - | - | - |
| CAPEA3626D3** Wet | 0.070 | 0.102 | 0.138 | 0.156 | 0.188 | 0.226 | 0.263 | 0.307 | 0.359 | 0.412 | 0.464 | 0.518 | 0.576 | - | - | - | - | - | - |
| CAPEA3626D3** Dry | 0.060 | 0.077 | 0.093 | 0.115 | 0.140 | 0.165 | 0.193 | 0.224 | 0.254 | 0.288 | 0.326 | 0.366 | 0.409 | - | - | - | - | - | - |
| CAPEA4830C3** Wet | 0.032 | 0.051 | 0.069 | 0.084 | 0.105 | 0.129 | 0.155 | 0.185 | 0.217 | 0.254 | 0.291 | 0.332 | 0.374 | 0.418 | 0.463 | 0.511 | - | - | - |
| CAPEA4830C3** Dry | 0.037 | 0.048 | 0.062 | 0.077 | 0.095 | 0.113 | 0.133 | 0.156 | 0.179 | 0.205 | 0.230 | 0.258 | 0.290 | 0.321 | 0.357 | 0.393 | - | - | - |
| CAPEA4830D3** Wet | 0.040 | 0.050 | 0.070 | 0.085 | 0.105 | 0.130 | 0.160 | 0.180 | 0.210 | 0.245 | 0.280 | 0.315 | 0.360 | 0.400 | 0.447 | 0.485 | - | - | - |
| CAPEA4830D3** Dry | 0.028 | 0.037 | 0.062 | 0.062 | 0.076 | 0.093 | 0.109 | 0.127 | 0.144 | 0.172 | 0.192 | 0.220 | 0.245 | 0.271 | 0.298 | 0.326 | - | - | - |
| CAPEA6030C3** Wet | 0.088 | 0.115 | 0.142 | 0.171 | 0.200 | 0.232 | 0.272 | 0.326 | 0.376 | 0.424 | 0.476 | 0.523 | 0.576 | 0.625 | 0.670 | 0.725 | - | - | - |
| CAPEA6030C3** Dry | 0.070 | 0.089 | 0.109 | 0.131 | 0.156 | 0.182 | 0.210 | 0.240 | 0.274 | 0.306 | 0.344 | 0.383 | 0.423 | 0.469 | 0.512 | 0.561 | - | - | - |
| CAPEA6030D3** Wet | 0.076 | 0.093 | 0.113 | 0.133 | 0.156 | 0.179 | 0.206 | 0.237 | 0.269 | 0.299 | 0.349 | 0.391 | 0.433 | 0.476 | 0.537 | 0.582 | - | - | - |
| CAPEA6030D3** Dry | 0.056 | 0.070 | 0.084 | 0.100 | 0.117 | 0.136 | 0.156 | 0.175 | 0.198 | 0.222 | 0.250 | 0.375 | 0.311 | 0.339 | - | - | - | - | - |
Airflow Data for CHPEA
| SCFM | 300 | 400 | 500 | 600 | 700 | 800 | 900 | 1000 | 1100 | 1200 | 1300 | 1400 | 1500 | 1600 | 1700 | 1800 | 1900 | 2000 |
|---|
| CHPEA2422B3 Wet | 0.057 | 0.103 | 0.158 | 0.22 | 0.291 | 0.371 | 0.453 | 0.532 | 0.625 | 0.697 | - | - | - | - | - | - | - | - |
| CHPEA2422B3 Dry | 0.027 | 0.052 | 0.087 | 0.131 | 0.175 | 0.225 | 0.279 | 0.346 | 0.416 | 0.491 | - | - | - | - | - | - | - | - |
| CHPEA3026B3 Wet | 0.033 | 0.060 | 0.092 | 0.131 | 0.173 | 0.220 | 0.273 | 0.331 | 0.400 | 0.469 | 0.540 | 0.621 | 0.696 | - | - | - | - | - |
| CHPEA3026B3 Dry | 0.024 | 0.042 | 0.064 | 0.095 | 0.126 | 0.158 | 0.194 | 0.236 | 0.283 | 0.335 | 0.389 | 0.444 | 0.501 | - | - | - | - | - |
| CHPEA3026C3 Wet | 0.032 | 0.061 | 0.087 | 0.119 | 0.148 | 0.184 | 0.222 | 0.277 | 0.323 | 0.361 | 0.415 | 0.468 | 0.500 | - | - | - | - | - |
| CHPEA3026C3 Dry | 0.038 | 0.052 | 0.068 | 0.084 | 0.107 | 0.134 | 0.165 | 0.192 | 0.244 | 0.284 | 0.330 | 0.380 | 0.432 | - | - | - | - | - |
| CHPEA3626B3 Wet | 0.041 | 0.064 | 0.092 | 0.132 | 0.169 | 0.205 | 0.252 | 0.303 | 0.357 | 0.415 | 0.480 | 0.549 | 0.621 | - | - | - | - | - |
| CHPEA3626B3 Dry | 0.028 | 0.048 | 0.072 | 0.099 | 0.131 | 0.166 | 0.207 | 0.251 | 0.299 | 0.353 | 0.412 | 0.474 | 0.540 | - | - | - | - | - |
| CHPEA3626C3 Wet | 0.040 | 0.061 | 0.083 | 0.110 | 0.141 | 0.171 | 0.195 | 0.233 | 0.272 | 0.314 | 0.357 | 0.401 | 0.444 | - | - | - | - | - |
| CHPEA3626C3 Dry | 0.025 | 0.036 | 0.052 | 0.069 | 0.088 | 0.106 | 0.126 | 0.155 | 0.186 | 0.221 | 0.255 | 0.286 | 0.326 | - | - | - | - | - |
| CHPEA4830C3 Wet | 0.042 | 0.071 | 0.097 | 0.128 | 0.154 | 0.194 | 0.230 | 0.260 | 0.300 | 0.343 | 0.390 | 0.433 | 0.483 | 0.529 | 0.589 | 0.627 | 0.676 | 0.730 | - |
| CHPEA4830C3 Dry | 0.019 | 0.031 | 0.044 | 0.059 | 0.077 | 0.099 | 0.123 | 0.153 | 0.181 | 0.211 | 0.247 | 0.283 | 0.321 | 0.362 | 0.404 | 0.451 | 0.496 | 0.546 | - |
| CHPEA4830D3 Wet | 0.036 | 0.058 | 0.081 | 0.112 | 0.143 | 0.171 | 0.204 | 0.238 | 0.277 | 0.319 | 0.363 | 0.410 | 0.447 | 0.491 | 0.537 | 0.582 | 0.618 | 0.662 | - |
| CHPEA4830D3 Dry | 0.016 | 0.024 | 0.034 | 0.047 | 0.061 | 0.077 | 0.095 | 0.114 | 0.135 | 0.156 | 0.182 | 0.208 | 0.236 | 0.268 | 0.300 | 0.332 | 0.366 | 0.400 | - |
| CHPEA6030C3 Wet | 0.043 | 0.069 | 0.105 | 0.148 | 0.188 | 0.226 | 0.265 | 0.312 | 0.366 | 0.428 | 0.489 | 0.548 | 0.605 | 0.654 | 0.700 | 0.760 | 0.820 | 0.860 | - |
| CHPEA6030C3 Dry | 0.019 | 0.031 | 0.044 | 0.059 | 0.077 | 0.099 | 0.123 | 0.153 | 0.181 | 0.211 | 0.247 | 0.283 | 0.321 | 0.362 | 0.404 | 0.451 | 0.496 | 0.546 | - |
| CHPEA6030D3 Wet | 0.019 | 0.039 | 0.068 | 0.096 | 0.126 | 0.154 | 0.205 | 0.253 | 0.305 | 0.347 | 0.406 | 0.453 | 0.500 | 0.534 | 0.588 | 0.632 | 0.677 | 0.729 | - |
| CHPEA6030D3 Dry | 0.016 | 0.024 | 0.034 | 0.047 | 0.061 | 0.077 | 0.095 | 0.114 | 0.135 | 0.156 | 0.182 | 0.208 | 0.236 | 0.268 | 0.300 | 0.332 | 0.366 | 0.400 | - |
Airflow Data for CSCT
| SCFM | 500 | 600 | 700 | 800 | 900 | 1000 | 1100 | 1200 | 1300 | 1400 | 1500 | 1600 | 1700 | 1800 | 1900 | 2000 | 2100 | 2200 |
|---|
| CSCT2412S3 Wet | 0.104 | 0.143 | 0.176 | 0.212 | 0.255 | 0.292 | 0.321 | 0.344 | - | - | - | - | - | - | - | - | - | - |
| CSCT2412S3 Dry | 0.048 | 0.067 | 0.086 | 0.108 | 0.132 | 0.159 | 0.186 | 0.206 | - | - | - | - | - | - | - | - | - | - |
| CSCT3012M3 Wet | - | - | 0.062 | 0.076 | 0.092 | 0.109 | 0.131 | 0.156 | 0.186 | 0.209 | - | - | - | - | - | - | - | - |
| CSCT3012M3 Dry | - | - | 0.032 | 0.043 | 0.055 | 0.068 | 0.082 | 0.099 | 0.114 | 0.131 | - | - | - | - | - | - | - | - |
| CSCT3612L3 Wet | - | - | - | - | 0.045 | 0.063 | 0.081 | 0.099 | 0.116 | 0.132 | 0.148 | 0.166 | 0.183 | 0.202 | 0.220 | 0.236 | 0.259 | 0.278 | 0.291 |
| CSCT3612L3 Dry | - | - | - | - | 0.039 | 0.051 | 0.064 | 0.077 | 0.092 | 0.105 | 0.121 | 0.138 | 0.150 | 0.175 | 0.191 | 0.214 | 0.230 | 0.251 | 0.262 |
| CSCT6012L3 Wet | - | - | - | - | 0.051 | 0.068 | 0.085 | 0.103 | 0.120 | 0.137 | 0.154 | 0.173 | 0.192 | 0.212 | 0.233 | 0.255 | 0.278 | 0.299 | 0.319 |
| CSCT6012L3 Dry | - | - | - | - | 0.043 | 0.056 | 0.069 | 0.084 | 0.099 | 0.115 | 0.132 | 0.149 | 0.167 | 0.185 | 0.207 | 0.227 | 0.249 | 0.272 | 0.282** |
Airflow Data for CAUTA
| SCFM | 400 | 500 | 600 | 700 | 800 | 900 | 1000 | 1100 | 1200 | 1300 | 1400 | 1500 | 1600 | 1700 | 1800 | 1900 | 2000 | 2100 | 2200 |
|---|
| CAUTA1818A3** Wet | 0.080 | 0.135 | 0.205 | 0.275 | 0.346 | 0.422 | 0.516 | 0.620 | 0.715 | - | - | - | - | - | - | - | - | - | - |
| CAUTA1818A3** Dry | 0.074 | 0.115 | 0.180 | 0.239 | 0.297 | 0.368 | 0.443 | 0.543 | 0.638 | - | - | - | - | - | - | - | - | - | - |
| CAUTA1818B3** Wet | 0.067 | 0.106 | 0.165 | 0.215 | 0.261 | 0.317 | 0.372 | 0.425 | 0.482 | - | - | - | - | - | - | - | - | - | - |
| CAUTA1818B3** Dry | 0.050 | 0.087 | 0.125 | 0.175 | 0.215 | 0.265 | 0.319 | 0.381 | 0.444 | - | - | - | - | - | - | - | - | - | - |
| CAUTA2422A3** Wet | 0.108 | 0.150 | 0.195 | 0.250 | 0.310 | 0.379 | 0.460 | 0.543 | 0.625 | 0.730 | - | - | - | - | - | - | - | - | - |
| CAUTA2422A3** Dry | 0.088 | 0.125 | 0.170 | 0.215 | 0.265 | 0.320 | 0.385 | 0.440 | 0.535 | 0.618 | - | - | - | - | - | - | - | - | - |
| CAUTA2422B3** Wet | 0.090 | 0.130 | 0.150 | 0.220 | 0.250 | 0.310 | 0.369 | 0.436 | 0.508 | 0.584 | - | - | - | - | - | - | - | - | - |
| CAUTA2422B3** Dry | 0.082 | 0.100 | 0.140 | 0.170 | 0.210 | 0.260 | 0.300 | 0.350 | 0.410 | 0.480 | - | - | - | - | - | - | - | - | - |
| CAUTA2422C3** Wet | 0.091 | 0.110 | 0.139 | 0.172 | 0.205 | 0.245 | 0.285 | 0.335 | 0.387 | 0.437 | - | - | - | - | - | - | - | - | - |
| CAUTA2422C3** Dry | 0.069 | 0.084 | 0.111 | 0.133 | 0.162 | 0.185 | 0.210 | 0.250 | 0.295 | 0.330 | - | - | - | - | - | - | - | - | - |
| CAUTA3022A3** Wet | 0.115 | 0.150 | 0.190 | 0.229 | 0.270 | 0.310 | 0.365 | 0.420 | 0.475 | - | - | - | - | - | - | - | - | - | - |
| CAUTA3022A3** Dry | 0.096 | 0.122 | 0.150 | 0.183 | 0.215 | 0.252 | 0.292 | 0.334 | 0.382 | - | - | - | - | - | - | - | - | - | - |
| CAUTA3022B3** Wet | 0.090 | 0.110 | 0.140 | 0.170 | 0.200 | 0.240 | 0.280 | 0.320 | 0.370 | - | - | - | - | - | - | - | - | - | - |
| CAUTA3022B3** Dry | 0.080 | 0.100 | 0.120 | 0.150 | 0.180 | 0.210 | 0.240 | 0.260 | 0.300 | - | - | - | - | - | - | - | - | - | - |
| CAUTA3022C3** Wet | 0.134 | 0.167 | 0.204 | 0.245 | 0.290 | 0.338 | 0.389 | 0.444 | 0.485 | - | - | - | - | - | - | - | - | - | - |
| CAUTA3022C3** Dry | 0.127 | 0.157 | 0.190 | 0.229 | 0.269 | 0.316 | 0.360 | 0.415 | 0.450 | - | - | - | - | - | - | - | - | - | - |
| CAUTA3026B3** Wet | 0.100 | 0.120 | 0.150 | 0.180 | 0.210 | 0.240 | 0.280 | 0.310 | 0.360 | 0.360 | - | - | - | - | - | - | - | - | - |
| CAUTA3026B3** Dry | 0.080 | 0.100 | 0.130 | 0.150 | 0.170 | 0.200 | 0.230 | 0.270 | 0.300 | 0.300 | - | - | - | - | - | - | - | - | - |
| CAUTA3026C3** Wet | 0.130 | 0.150 | 0.180 | 0.210 | 0.250 | 0.280 | 0.310 | 0.340 | 0.378 | 0.414 | 0.414 | - | - | - | - | - | - | - | - |
| CAUTA3026C3** Dry | 0.110 | 0.132 | 0.156 | 0.181 | 0.208 | 0.237 | 0.270 | 0.300 | 0.335 | 0.372 | 0.372 | - | - | - | - | - | - | - | - |
| CAUTA3626B3** Wet | 0.120 | 0.140 | 0.160 | 0.190 | 0.220 | 0.250 | 0.280 | 0.310 | 0.350 | 0.380 | 0.380 | - | - | - | - | - | - | - | - |
| CAUTA3626B3** Dry | 0.091 | 0.109 | 0.127 | 0.147 | 0.160 | 0.190 | 0.210 | 0.230 | 0.260 | 0.280 | 0.280 | - | - | - | - | - | - | - | - |
| CAUTA3626C3** Wet | 0.150 | 0.174 | 0.210 | 0.240 | 0.270 | 0.310 | 0.350 | 0.400 | 0.440 | 0.490 | 0.540 | 0.600 | 0.660 | - | - | - | - | - | - |
| CAUTA3626C3** Dry | 0.133 | 0.160 | 0.190 | 0.210 | 0.250 | 0.280 | 0.320 | 0.350 | 0.390 | 0.440 | 0.480 | 0.530 | 0.590 | - | - | - | - | - | - |
| CAUTA4230C3** Wet | 0.150 | 0.180 | 0.210 | 0.230 | 0.270 | 0.300 | 0.340 | 0.380 | 0.430 | 0.477 | 0.520 | - | - | - | - | - | - | - | - |
| CAUTA4230C3** Dry | 0.120 | 0.140 | 0.160 | 0.190 | 0.210 | 0.230 | 0.260 | 0.290 | 0.320 | 0.350 | 0.380 | - | - | - | - | - | - | - | - |
| CAUTA4230D3** Wet | 0.140 | 0.160 | 0.190 | 0.220 | 0.260 | 0.300 | 0.340 | 0.380 | 0.420 | 0.460 | 0.510 | 0.560 | 0.610 | - | - | - | - | - | - |
| CAUTA4230D3** Dry | 0.120 | 0.140 | 0.170 | 0.200 | 0.230 | 0.260 | 0.300 | 0.330 | 0.360 | 0.400 | 0.430 | 0.480 | 0.520 | - | - | - | - | - | - |
| CAUTA6030C3** Wet | 0.120 | 0.130 | 0.150 | 0.180 | 0.200 | 0.220 | 0.250 | 0.280 | 0.310 | 0.340 | 0.380 | 0.410 | 0.450 | - | - | - | - | - | - |
| CAUTA6030C3** Dry | 0.090 | 0.100 | 0.120 | 0.140 | 0.160 | 0.180 | 0.210 | 0.230 | 0.260 | 0.280 | 0.310 | 0.340 | 0.370 | - | - | - | - | - | - |
| CAUTA6030D3** Wet | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| CAUTA6030D3** Dry | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Airflow Data for CAHEA
| SCFM | 700 | 800 | 900 | 1000 | 1100 | 1200 | 1300 | 1400 | 1500 | 1600 | 1700 | 1800 | 1900 | 2000 | 2100 | 2200 |
|---|
| CAHEA3630C3 Wet | 0.088 | 0.115 | 0.142 | 0.171 | 0.200 | 0.232 | 0.272 | 0.326 | 0.376 | 0.424 | 0.476 | 0.523 | 0.576 | 0.625 | 0.670 | 0.725 |
| CAHEA3630C3 Dry | 0.070 | 0.089 | 0.109 | 0.131 | 0.156 | 0.182 | 0.210 | 0.240 | 0.274 | 0.306 | 0.344 | 0.383 | 0.423 | 0.469 | 0.512 | 0.561 |
Accessories
- High-Temp Drain Pan Kits: For CAPFA, CAPTA & CAUTA models, available for 14", 17½", 21", and 24½" furnaces.
- Drain Pan Insulation Kits: For CAPFA, CAPTA, CAPEA & CAUTA, with kit numbers DPICX-AB, DPICX-BB, DPICX-CB, DPICX-DB, DPICX-DC.
- UV-C Part Numbers: Models UC18S15-24, UC18S15-24B with corresponding lamps.
- Horizontal Right Coil Accessory: For high humidity environments in CHPTA & CHPEA, with kit HHCMK01.
- R32 Accessory Kit for Non-A2L Furnace: Kit 0230K00044 for various models.
- R32 Zoning Accessory Kit: Kit 0230K00007 for various models.
- Downflow Kits for CAPEA: Kit DFKE-02 for CAPEA4830C3/D3 and CAPEA6030C3/D3.
- Accessories for CAHEA: High Humidity Kit (HHK0011), Condensate Management Kit (CMK-0017), Downflow Kit (DFKE-02), Horizontal Installation Kit (0270K00063), and Gasket (0154D20003S*).
- Filler Plates: For non-straight coil-furnace matchup (CAPFA, CAPTA, CHPTA, CAPEA & CHPEA) with kit FPKT01.
Notes and Disclaimers
Amana® is a registered trademark of Maytag Corporation or its related companies and is used under license. All rights reserved.
Continuing commitment to quality products may mean specification changes without notice.
©2025 DAIKIN COMFORT TECHNOLOGIES MANUFACTURING, L.P. Houston, Texas. Printed in the USA.
Warranty details: Complete warranty details are available from your local dealer or at www.goodmanmfg.com. To receive the 10-Year Parts Limited Warranty, online registration must be completed within 60 days of installation. Registration requirements may vary by state/province. Refer to complete warranty details for full limitations and exclusions.
