Amana Vertical Terminal Air Conditioner (VTAC) and Heat Pump Specifications and Accessories Catalog

Introduction

A legacy of comfort. The impeccable reputation of an American original. Amana heating and cooling systems are part of the enduring legacy of one of America's most recognized and respected brands. Originating eight decades ago in Amana, Iowa, the brand is synonymous with long-lasting, premium-quality products – from home appliances to heating and air conditioning equipment. Chances are, you and generations before you have enjoyed the dependable performance and longevity the Amana brand continues to deliver.

Call your Amana brand PTAC sales representative at 877-454-7822 for complete details.

Before purchasing this appliance, read important information about its estimated annual energy consumption, yearly operating cost, or energy efficiency rating that is available from your retailer.

Our continuing commitment to quality products may mean a change in specifications without notice. ©2025 Goodman Manufacturing Company, L.P. Amana is a registered trademark of Maytag Corporation or its related companies and is used under license. All rights reserved.

This document is certified by Intertek, indicating compliance with relevant standards.

Product Features

Efficient R32 Refrigerant
SEER2 and HSPF2 Rated
Slinger ring technology
Heat Pump operation down to 10°F
Low-ambient lock-out
Active Defrost Cycle
Corrosion resistant blue fin condenser coils
Safety power disconnect
Wall-mount thermostat
Electrical disconnect
Random unit restart
Completed insulated cabinet for quiet operation
"Ductable" to multiple rooms
Secondary overflow drains
Closet Mounted
Base pan heater
Compressor restart delay
Rectangular conditioned air opening for all models
Adjustable fresh air damper
Telescoping exterior wall adapter
Floating chassis design
Self-contained system
Front, right, or left installations
Brushless DC motors
All units 100% run tested
Up to 765 CFM discharge airflow
5 year limited warranty
Certified to AHRI Standard 210/240

Nomenclature

The model number for Amana VTAC units is constructed using a specific code:

Component	Position in Model Number	Description/Values
Brand	1	A = Amana® Brand
Product Category	2	V = Vertical PTAC
Unit Type	3	H = Heat Pump
Efficiency	4,5	09 = 9,000 BTU/h, 12 = 12,000 BTU/h, 18 = 18,000 BTU/h, 24 = 24,000 BTU/h
Voltage	6	3 = 208/230v
Series	7	J = DOE 210/240 Certified R32
Standard Model	8,9	AXXX (Placeholder for specific model series)
Electrical Heater Size	10,11,12,13	25 = 2.5 kW, 35 = 3.4 kW, 50 = 5 kW, 75 = 7.5 kW, 10 = 10 kW

Example Model Number Structure: AVH093J25AXXX

Specifications

AVH Model Specifications - Heat Pump/Backup Electric Heat

Model 1,2,3,4,5	AVH093J** AXXX	AVH123J** AXXX	AVH183J** AXXX	AVH243J** AXXX	AVH094J** AXXX	AVH124J** AXXX	AVH184J** AXXX	AVH244J** AXXX
Cooling Data
Total Cooling Capacity at 95°F (BTU/h)	9,400	11,200	17,800	22,600	9,400	11,200	17,800	22,600
Sensible Cooling Capacity (BTU/h)	7,100	8,800	13,100	14,700	7,100	8,800	13,100	14,700
SEER2	12.3	12.3	12.1	12.1	12.3	12.3	12.1	11.9
EER2	10.6	10.6	10.6	10.6	10.6	10.6	10.6	10.6
Voltage	208/230	208/230	208/230	208/230	265	265	265	265
Heating Data
Heat Pump Capacity at 47°F (BTU/h)	8,600	10,400	16,200	19,500	8,600	10,400	16,200	19,500
Heat Pump Capacity at 14°F (BTU/h)	4,900	6,000	9,800	12,400	4,900	6,000	9,800	12,400
HSPF2	6.3	6.3	6.7	6.7	6.3	6.3	6.7	6.7
Heater Size Options (kW)	2.5/3.4/ 5.0	2.5/3.4/ 5.0	2.5/3.4/ 5.0/7.5	2.5/3.4/ 5.0/7.5/ 10.0	2.5/3.4/ 5.0	2.5/3.4/ 5.0	2.5/3.4/ 5.0/7.5	2.5/3.4/ 5.0/7.5/ 10.0
Physical
Dimensions (W x D x H)	23" x 23" x 32"	23" x 23" x 32"	23" x 23" x 47"	23" x 23" x 52"	23" x 23" x 32"	23" x 23" x 32"	23" x 23" x 47"	23" x 23" x 52"
Refrigerant	R32
Volume (OZ)	26.0	28.7	40.0	44.0	26.0	28.7	40.0	44.0
Airflow Data
Indoor CFM @ 0.0" ESP	Low: 360, High: 420	Low: 360, High: 460	Low: 620, High: 705	Low: 675, High: 765	Low: 360, High: 420	Low: 360, High: 460	Low: 620, High: 705	Low: 675, High: 765
Indoor CFM @ 0.1" ESP	Low: 325, High: 385	Low: 325, High: 430	Low: 550, High: 640	Low: 600, High: 700	Low: 325, High: 385	Low: 325, High: 430	Low: 550, High: 640	Low: 600, High: 700
Indoor CFM @ 0.15" ESP	Low: 310, High: 370	Low: 310, High: 415	Low: 510, High: 610	Low: 560, High: 670	Low: 310, High: 370	Low: 310, High: 415	Low: 510, High: 610	Low: 560, High: 670
Indoor CFM @ 0.2" ESP	Low: 295, High: 355	Low: 295, High: 400	Low: 480, High: 585	Low: 525, High: 635	Low: 295, High: 355	Low: 295, High: 400	Low: 480, High: 585	Low: 525, High: 635
Indoor CFM @ 0.25" ESP	Low: 270, High: 325	Low: 270, High: 380	Low: 450, High: 565	Low: 490, High: 615	Low: 270, High: 325	Low: 270, High: 380	Low: 450, High: 565	Low: 490, High: 615
Indoor CFM @ 0.3" ESP	Low: 260, High: 300	Low: 260, High: 350	Low: 400*, High: 550	Low: 440*, High: 600	Low: 260, High: 300	Low: 260, High: 350	Low: 400*, High: 550	Low: 440*, High: 600
Indoor CFM @ 0.35" ESP	Low: -, High: 365	Low: -, High: 400	Low: -, High: 500	Low: -, High: 540	Low: -, High: 365	Low: -, High: 400	Low: -, High: 500	Low: -, High: 540
Indoor CFM @ 0.4" ESP	Low: -, High: 320	Low: -, High: 350	Low: -, High: 450*	Low: -, High: 490*	Low: -, High: 320	Low: -, High: 350	Low: -, High: 450*	Low: -, High: 490*
Ventilation
CFM	Up to 60

*Maximum Allowable Static. Units rated at 0.3" ESP.

1. Tested in accordance with AHRI Standard 210/240

2. Minimum voltage on 230/208-volt models is 197 volts; maximum is 253 volts. Minimum voltage on 265-volt models is 239 volts; maximum is 292 volts.

3. Specify two-digit heater kW size to complete model number.

4. R32 refrigerant used in all systems

5. All specifications are subject to change without notice.

AVH Model Specifications - Electric Heat

Voltage 2,3	Electric Heater Size	Nominal Heating			Total Watts	Electric Heater Amps	Total Electric Heater Amps	Min. Circuit Ampacity 1 (Amps) 1	MOP
		at 230V	at 208V	at 265V
AVH09, AVH12, & AVH18
230/208	2.5/2.0	8,300	6,800	2,450/2,000	10.7/9.6	11.5/10.4	14.4	15	Hardwired
230/208	3.4/2.7	11,400	9,300	3,350/2,740	14.6/13.2	15.4/14.0	19.3	20	Hardwired
230/208	5.0/4.1	17,000	13,900	5,000/4,090	21.7/19.7	22.5/20.5	28.2	30	Hardwired
230/208	7.5/6.1	25,500	20,900	7,500/6,135	32.6/29.5	33.4/30.3	41.8	45	Hardwired
265	2.5	-	8,300	2,450	9.2	10	13.9	15	Hardwired
265	3.4	-	11,400	3,350	12.6	13.4	16.9	20	Hardwired
265	5	-	17,000	5,000	18.9	19.7	25.6	30	Hardwired
265	7.5	-	25,500	7,500	28.3	29.1	36.4	40	Hardwired
AVH24
230/208	2.5/2.0	8,300	6,800	2,450/2,000	10.7/9.6	11.5/10.4	14.4	20	Hardwired
230/208	3.4/2.7	11,400	9,300	3,350/2,740	14.6/13.2	15.4/14.0	19.3	25	Hardwired
230/208	5.0/4.1	17,000	13,900	5,000/4,090	21.7/19.7	22.5/20.5	28.2	30	Hardwired
230/208	7.5/6.1	25,500	20,900	7,500/6,135	32.6/29.5	33.4/30.3	41.8	45	Hardwired
230/208	10.0/8.2	34,400	27,900	10,000/8,180	43.5/39.3	44.3/40.1	55.4	60	Hardwired
265	2.5	-	8,300	2,450	9.2	10	15.5	20	Hardwired
265	3.4	-	11,400	3,350	12.6	13.4	18.5	20	Hardwired
265	5	-	17,000	5,000	18.9	19.7	27.3	30	Hardwired
265	7.5	-	25,500	7,500	28.3	29.1	36.2	40	Hardwired
265	10.0	-	34,400	10,000	37.7	38.5	47.9	50	Hardwired

1. Minimum branch circuit ampacity rating conform to the National Electric Code; however, local codes should apply

2. Minimum voltage on 230/208-volt models is 197 volts; maximum is 253 volts. Minimum voltage on 265-volt models is 239; maximum is 292

3. All specifications are subject to change without notice

Dimensions

Nominal Unit Dimensions

The VTAC units are available in three main heights:

31" Height: 23" Width x 23" Depth. Applicable models: AVH09***AXXX, AVH12***AXXX.
47" Height: 23" Width x 23" Depth. Applicable models: AVH18***AXXX.
51" Height: 23" Width x 23" Depth. Applicable models: AVH24***AXXX.

Unit Duct Dimensions

For AVH09 & AVH12:

Duct Dimension 1: 4.154 inches
Duct Dimension 2: 14.255 inches

For AVH18 & AVH24:

Duct Dimension 1: 6.725 inches
Duct Dimension 2: 20.500 inches

Accessories

Exterior Wall Adaptor: A two-part sleeve that telescopes to fit wall penetrations. Available in two sizes: AVEWA05-08A (telescopes 5 1/2" to 8") and AVEWA08-14A (telescopes 8" to 14"). Dimensions: 30 3/8" high x 24 1/8" wide. Cutout Dimensions: 30 7/8" high x 24 5/8" wide.
Architectural Louver: An extruded aluminum louver that attaches to the outdoor section of the wall adapter. Dimensions: 31 1/16" high x 25 9/16" wide. Available colors: Anodized Aluminum (AVAGK01CB), Stonewood Beige (AVAGK01TB), Dark Bronze (AVAGK01DB), Amana White (AVAGK01WB), Custom Color (AVAGK01SB).
Access Panel/Return Air Grille: Serves as an access panel to the chassis and an interior return air grille. A field-supplied filter (25" x 20") can be mounted inside. Dimensions: 58" high x 29" wide. Cutout Dimensions: 55 3/4" high x 27" wide. Available with hinge pre-installed on the left side (AVLWP01A-L) or right side (AVLWP01A-R).
Accessory Drain Pan/Kit: Available for AVH18 & AVH24 models. Supports left and right-hand connections. Model: AVDK18-2401B.
First Company Sleeve Adapter: A welded adapter for retrofitting AVH09 and AVH12 units into existing First Company SPXR series SPVU wall sleeves and louvers. Not available for AVH18 & AVH24 models. Model: AVAKFC01A.
Digital Wall Thermostat: Available in two models: PHWT-A150H (3" backlit display, 2 speed fan, temperature limiting, adjustable calibration) and PHWT-A200 (4 1/4" backlit display, auto-changeover/programmable, 2 speed fan, temperature limiting, adjustable calibration).
Wireless RF Energy Management Controls: Eden Energy Management Controls operate on 2.4 GHz 802.15.4 Radio Frequency for unit configuration and property-wide control/monitoring via the optional DL01G Web enabled platform. Components include: DS01G (Thermostat: 2-way Communications), DD01E (Occupancy Sensor: EMS Activation), GT01H (Generic Radio Antenna/Router), DD01F (Door Switch: EMS Activation), DP01G (Web-enabled Platform Server), DL01G (Web-enabled Platform Server Link BAC-NET capable), DR01G (Mesh Repeater), DL01G-SERIEAL (Serial Repeater).
Discharge Adapter: Converts factory rectangular discharge duct into a standard 10" circular duct connection. Models: AVDTK18-24A (for AVH18 & 24) and AVDTK09-12A (for AVH09 & 12).
Extra Deep Filter Brackets: Replacement brackets to accommodate 2" or 4" deep filters. Models: AMAVPFK0912-2 (Small Chassis 2" Filter Bracket), AMAVPFK0912U (Small Chassis 4" Filter Bracket), AMAVPFK1824-2 (Large Chassis 2" Filter Bracket), AMAVPFK1824U (Large Chassis 4" Filter Bracket).

A Legacy of Comfort

The impeccable reputation of an American original. Amana heating and cooling systems are part of the enduring legacy of one of America's most recognized and respected brands. Originating eight decades ago in Amana, Iowa, the brand is synonymous with long-lasting, premium-quality products – from home appliances to heating and air conditioning equipment. Chances are, you and generations before you have enjoyed the dependable performance and longevity the Amana brand continues to deliver.