Cisco DP-9861 UC Phone: Compliance and Label Information
Product Details
Manufacturer: Cisco Systems, Inc.
Product Name: UC Phone
Model: DP-9861
Labeling Information
The rear of the Cisco DP-9861 UC Phone is depicted, with annotations indicating the precise location for laser etching text.
Laser Etching Text Position: Marked on the rear of the device.
Laser Etching Text: Refers to the area where specific product identification or serial number information is laser-etched.
Regulatory Compliance and Certifications
This device is designed to meet various international regulatory standards. Key compliance information includes:
- FCC Compliance: Complies with Part 15 of the FCC rules. Operation is subject to two conditions: it must not cause harmful interference, and it must accept any interference received, including that which may cause undesired operation.
- HAC: Hearing Aid Compatibility.
- CE Marking: Indicates conformity with European Union directives.
- R-NZ: Compliance with New Zealand regulations.
- IFT: Certification by the Israeli Ministry of Communications.
- ANATEL: Type Acceptance by the Brazilian National Telecommunications Agency.
- TELEPERMIT: Holder: Cisco Systems NZ Ltd.
- IMDA Standards: Compliance with Singapore's Infocomm Media Development Authority standards.
- CMIT ID: China Mobile Information Technology identification.
- IC: Industry Canada certification.
- FCC ID: LDKESPRC2920
- IC: 2461N-ESPRC2920
Technical and Manufacturing Details
Power Input: 48V ⎓ 0.42A
Frequency Restriction: 5.2/5.3 GHz bands are limited to indoor use only in Japan.
Manufacturing Origin: Made in Vietnam / Fabriqué au Vietnam.
Document Version: MODEL C compliance artwork DP-9861_VN_V1, First Release, dated 2024-03-21.
Dimensional Tolerance Specifications
The drawing includes specifications for dimensional tolerances. The general format includes a size designation (A2), model information, and a table detailing tolerances for various parameters (A, B, CEPS, EPE, BAG, CTN, LABEL, USR) based on dimension ranges in millimeters.
General Tolerances: Draft Tolerance ±0.2 mm. Critical dimensions are marked with an asterisk (*).
| Dimension Range (mm) | Tol. A | Tol. B | CEPS | EPE | BAG | CTN | LABEL | USR | |
|---|---|---|---|---|---|---|---|---|---|
| 30-120 | 0.15 | 0.20 | 0.30 | 0.50 | 0.50 | 5.00 | 2.00 | 0.25 | 0.10 |
| 120-300 | 0.20 | 0.30 | 0.40 | 1.00 | 1.00 | 10.00 | 3.00 | 0.30 | 0.15 |
| 300-450 | 0.25 | 0.40 | 0.50 | 2.00 | 2.00 | 15.00 | 5.00 | 0.50 | 0.20 |
| 450-600 | 0.30 | 0.50 | 0.60 | 3.00 | 3.00 | 20.00 | 5.00 | 0.80 | 0.20 |
