TECKNET TK-MS317 Wireless Rechargeable Mouse

Introduction

Thank you for purchasing the TECKNET Wireless Rechargeable Mouse. Please read this User Manual thoroughly before use of the product and retain it for future reference. For any issues, contact support@ylinksworld.com.

Package Contents

• 1x TECKNET TK-MS317 Wireless Rechargeable Mouse
• 1x USB Receiver
• 1x Charging Cable
• 1x User Manual

Product Overview

The mouse features the following components:

• 1. Left Button
• 2. Scroll Wheel
• 3. Charging Indicator (located under the scroll wheel)
• 4. Right Button
• 5. DPI Button
• 6. Status Indicator (located at the front)
• 7. Forward Button (side button)
• 8. Backward Button (side button)
• 9. Charging Port (located at the front)
• 10. Pairing Button (located on the bottom)
• 11. Power Switch (located on the bottom, with positions for BT, OFF, and 2.4G)
• 12. USB Receiver (a small USB-A plug, typically stored in the mouse or separate)

Diagrams illustrate the mouse's layout and the function of the power switch and indicators.

Getting Started

Using the USB Receiver (2.4G)

1. Remove the USB receiver from its packaging and plug it into a USB-A port on your computer.
2. Toggle the power switch on the bottom of the mouse to the "2.4G" position. The mouse is now ready for use.

Using Bluetooth (BT)

1. Toggle the power switch on the bottom of the mouse to the "BT" position.
2. Press and hold the Pairing Button on the bottom of the mouse for 2-3 seconds. The status indicator at the front will flash blue quickly, indicating the mouse is in BT pairing mode.
3. Enable Bluetooth on your computer. Search for available devices and select "TK-MS317" to initiate the pairing process.
4. Once the BT connection is successfully established, the status indicator will turn off.

Features

Changing DPI

Press the DPI button to cycle through 6 DPI levels. The status indicator will flash a corresponding number of times (one to six) to indicate the selected DPI level.

Charging Method

When the status indicator flashes red, it signifies that the mouse battery is low. To charge the mouse, connect it to a power supply using the provided charging cable. The charging indicator located underneath the scroll wheel will illuminate red during charging.

Charging Indicator Status:

• RED: Charging in progress
• GREEN: Charging completed

Low Battery Indicator

When the mouse battery is low, the status indicator will flash red. Please recharge the mouse.

Jiggler Mode

This feature prevents your computer from entering sleep mode by simulating continuous mouse cursor movement.

1. Connect the mouse to your computer.
2. Press and hold the DPI button for 3-5 seconds. The indicator light will become solid, and the mouse will enter Jiggler mode. The cursor will automatically move (jiggle), and the computer will not go into sleep mode.
3. In Jiggler Mode:
   • If you move the mouse, Jiggler mode will pause. The cursor will stop jiggling, and the indicator light will turn off. The mouse can be used normally.
   • After 8-10 seconds of no mouse movement, the mouse will automatically re-enter Jiggler mode, the cursor will jiggle, and the indicator light will turn on.
4. To exit Jiggler mode: While the mouse is in Jiggler mode (cursor jiggling, indicator light on), long-press the DPI button for 3-5 seconds. The indicator light will turn off, and the mouse will exit Jiggler mode.

Important Notes on Jiggler Mode:

• When activating Jiggler mode for the first time, allow 8-10 seconds for the cursor to begin jiggling automatically.
• Clicking mouse buttons or scrolling the wheel will not stop the cursor from jiggling.
• To avoid reducing the mouse's lifespan, disable Jiggler mode when it is not needed.

System Requirements

• 1. USB-A Port
• 2. Operating System: Windows 98/Me/2000/XP/Vista/7/8/10/11

Specifications

• DPI: 6 DPI levels
• Connectivity Channels: USB receiver / BT
• Operating Voltage: 5 V
• Operating Current: <3 mA
• Transmission Power: -10dBm

Important Safety Instructions

Follow these instructions carefully:

• Retain these instructions for future reference.
• Before using the product, read all instructions and caution markings on the product, accessories, and device.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Keep the product away from fire to avoid an explosion.
• Do not place the product in or near an inflammable, explosive, or hazardous object.
• Do not operate the product with a damaged cord or plug.
• Do not operate the product if it has been damaged in any way.
• Do not disassemble the product. Disassembly may result in a risk of safety hazards.
• Do not throw or shake the product.
• Do not place the product in or near water, rain, excessive moisture, or extreme heat.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement and can be used in portable exposure condition without restriction.

IC Caution

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The device has been evaluated to meet general RF exposure requirement and can be used in portable exposure condition without restriction.

Correct Disposal of This Product

This marking on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

Simplified EU Declaration of Conformity

Hereby, Shenzhen Unichain Technology Co., Ltd. declares that the product type TK-MS317 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://teckneteu.com/

Limited 12-Month Warranty

What this warranty covers: Shenzhen Unichain Technology Co., LTD. (Manufacturer: “Unichain”) warrants to the original purchaser of this TECKNET product that the product shall be free of defects in design, assembly, material, or workmanship.

Period of coverage: Unichain warrants the TECKNET product for 12 Months.

What will be done to correct problems: Unichain will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product).

What is not covered by this warranty: All above warranties are null and void if the TECKNET product is not provided to Unichain for inspection upon Unichain’s request at the sole expense of the purchaser, or if Unichain determines that the TECKNET product has been improperly installed, altered in any way, or tampered with. The TECKNET Product Warranty does not protect against acts of God such as flood, earthquake, lightning, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (e.g. brownouts or sags), non-authorized program, or system equipment modification or alteration.

How to claim the warranty: Please contact retailers or visit the TECKNET website or email support@ylinksworld.com for more information. To extend the warranty period, please visit the TECKNET website and register your TECKNET products within 90 days of purchase.

Disclaimer

Every effort has been made to ensure that the information and procedures in this guide are accurate and complete. No liability can be accepted for any errors or omissions, and TECKNET reserves the right to make any changes without further notice to any products mentioned herein.