TECKNET M006 Cordless Mouse

Product Layout

The TECKNET M006 cordless mouse features the following components:

• [Left Click Button]
• [Scroll Wheel]
• [Low Battery Indicator]
• [DPI Switch Button]
• [Right Click Button]
• [Forward Button]
• [Backward Button]

Diagrams illustrate the placement of these buttons and the scroll wheel on the mouse.

Technical Specifications

Package Contents

• 1 x Cordless Mouse
• 1 x USB Nano Receiver
• 1 x User Manual

Note: Batteries are NOT included.

System Requirements

Hardware

• PC with a Pentium processor or equivalent AMD processors
• USB 2.0

Operating System

• Windows XP, Vista, Win7, Win8, Win8.1, Win10

Note: The scroll wheel functionality is optimized for the listed operating systems. Use on other systems may result in limited functionality.

Inserting the Batteries

The optical mouse uses two AA batteries (not included).

1. Open the battery cover.
2. Insert the batteries into the compartment, ensuring they correspond with the polarity markings [positive (+), negative (-)].
3. Close the battery cover.
4. Switch on the mouse by adjusting the power switch underneath the mouse. The red LED of the power indicator at the top of the mouse will flash.

Ensure correct battery polarity (+/-) matches the markings in the battery housing.

30-Month Battery Life

The mouse is designed for low power consumption, offering a battery life of up to 30 months. Actual battery life may vary based on user and computing conditions.

Receiver Connection

Take out the USB Nano receiver and plug it into a free USB port on your computer. The Plug & Play function will automatically detect and install the device.

Diagrams illustrate taking out the receiver and storing it.

Note: The receiver can be removed and stored in the battery compartment while not in use.

Intelligent Power Saving (IPS)

The mouse features an Intelligent Power Saving (IPS) function:

• The mouse will automatically switch off if the USB Nano receiver is disconnected or the PC is switched off to save power.
• If the mouse is not operated for 10 seconds, it enters the first level of IPS. Click any button to wake the mouse.
• If the mouse is not operated for 8 minutes, it enters the second level of IPS (sleep mode). Click any button to wake the mouse.

DPI Switch

The mouse supports six DPI levels: 800/1200/1600/2400/3200/4800 DPI. The default DPI is 1200.

Press the DPI button: DPI increases to the next level. The LED indicator will flash accordingly (e.g., three times for the first increase).

Diagrams illustrate the DPI switch and receiver storage.

Low Battery Power Indicator

The mouse is equipped with a low power indicator. When the battery power gets low during use, the indicator light under the scroll wheel will flash. Please replace the batteries.

Note: AA alkaline dry cell batteries are recommended.

FAQ

1. What should I do if the mouse does not work?

• Ensure battery polarity (+/-) is correct and matches markings in the battery housing.
• Check that batteries are not discharged.
• Try removing and reinstalling the batteries.
• Verify that your computer's power management features are turned off.
• Check that the Nano receiver's USB connector is firmly attached to the USB port.

2. The USB Nano receiver is recognized by Windows, but the cursor does not move?

• Check if the low power indicator on the top of the mouse lights up. If it lights up, the batteries are likely discharged; please replace them.
• If replacing batteries does not help, the mouse may not be connected to the receiver. Try reconnection and ensure the mouse is within the optimal operational working distance (1.5m) from its USB Nano receiver.

Limited 12-Month Warranty

What this warranty covers: Shenzhen Unichain Technology Co., LTD. (Manufacturer: “Unichain”) warrants to the original purchaser of this TECKNET product that the product shall be free of defects in design, assembly, material, or workmanship.

Period of coverage: Unichain warrants the TECKNET product for 12 Months.

What we will do to correct problems: Unichain will repair or replace, at its option, any defective product free of charge (except for shipping charges).

What is not covered: Warranties are void if the product is improperly installed, altered, or tampered with. It does not protect against acts of God, theft, normal wear and tear, abuse, or damage from power disturbances, non-authorized programs, or system modifications.

How to claim: Contact retailers, visit the TECKNET website, or email support@tecknetonline.com. Register products within 90 days of purchase for warranty extension.

Disclaimer: While efforts have been made to ensure accuracy, no liability is accepted for errors or omissions. TECKNET reserves the right to make changes without notice.

Important Safety Instructions

1. Save these instructions.
2. Read all instructions and caution markings before use.
3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
4. Supervise children to ensure they do not play with the appliance.
5. Keep the product away from fire or explosion hazards.
6. Observe polarity indicators [positive (+), negative (-)] for proper battery insertion.
7. Remove batteries if the product will not be used for a long period of time.
8. Do not place the product in or near any inflammable, explosive or hazardous object.
9. Do not place in or near water, rain, excess moisture or extreme heat.
10. Do not operate the product with damaged cord or plug.
11. Do not operate the product if it has been damaged in any way.
12. Do not disassemble the product. Disassembly may result in a risk of safety hazards.
13. Do not throw or shake the product.
14. To reduce the risk of electric shock, unplug the product from the power supply when not in use or switch off the power supply.

Declarations and Compliance

Simplified EU Declaration of Conformity

Shenzhen Unichain Technology Co., Ltd. declares that the product type M006 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://eu.tecknetonline.com/

Correct Disposal of This Product (WEEE)

This marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.