Introduction
Thank you for choosing a Hama product. Please read these instructions and information completely before use. Keep these instructions in a safe place for future reference.
Explanation of Warning Symbols and Notes
Warning: Indicates safety instructions or draws attention to specific hazards and risks.
Note: Indicates additional information or important notes.
Package Contents
- TV wall bracket
- TV support arms (2x)
- Drilling template
- Installation kit (see Fig. 1)
- These operating instructions
Note: Before installation, check the installation kit for completeness and ensure no parts are faulty or damaged.
Safety Notes
Warning:
- Supplied anchors are suitable for concrete, solid brick, cavity brick, and most panel walls.
- The supplied mounting kit may not cover all possibilities due to the variety of devices and wall structures.
- Screws for attaching the TV to the bracket may occasionally be too long.
- Read your TV's operating instructions for suitable fastening materials.
- If supplied kit lacks suitable materials, purchase from a specialized dealer.
- If your wall material differs, purchase suitable mounting materials from a specialized dealer.
- Never apply excessive force during mounting; this can damage your device or bracket.
- If in doubt, have the product mounted by a qualified technician.
- Do not mount above locations where people might linger.
- After mounting, check security and safety regularly (at least every three months).
- Do not exceed maximum load capacity or dimensions.
- Load symmetrically.
- Maintain safety clearance around the load.
- Remove load and stop using if product is damaged.
Intended Use and Specifications
The bracket is for wall mounting flat panel displays for private, non-commercial household use, only within buildings.
| Specification | Value |
|---|---|
| Maximum load bearing capacity | 35 kg |
| Screen size | 81.0 - 165.0 cm (US: 32" - 65") |
| Depth | 3.3 - 8.9 cm |
| Angle | -/+15° (device dependent) |
| Wall mounting plate dimensions | 53.8 x 13.7 cm |
| Mounting holes | VESA standard 400x400 |
Installation Requirements and Installation
Note: Installation requires two people. Ensure you have adequate support and help.
Check that necessary connections on your TV remain accessible after mounting.
The mounting kit includes parts for various wall types; not all parts may be needed. Keep any leftover parts for future use.
Installation Steps:
- Prepare the wall: Use the drilling template to mark hole positions. Ensure the wall can support the weight and check for hidden pipes or wires.
- Mount the wall plate: Drill holes and secure the wall plate to the wall using appropriate anchors and screws (refer to Fig. 2 for wall types and anchors).
- Attach support arms to TV: Select the correct screws (A3, B1, B2, B3, C1, C2, D1, D2, D3, D4, E1, E2) and spacers (F1) based on your TV's back panel (flat or curved). Ensure screws are the correct length and hand-tightened (see Fig. 3).
- Attach TV to wall plate: Mount the TV with attached arms onto the wall plate.
- Secure the TV: Lock the support arms onto the wall plate using the safety cord mechanism (see Fig. 4). Adjust the tilt angle (-/+15°) as needed.
- Final check: Ensure the TV is securely mounted and level.
Diagram Descriptions:
- Required Tools: Screwdriver, drill, spirit level, measuring tape, pencil.
- Installation Kit: Various screws (e.g., M8x12, M6x12), dowels (e.g., 8x63, Ø10x50), washers, and other mounting hardware.
- Wall Types: Illustrations show correct anchor usage for brick walls (e.g., using anchors like A1, A2) and dry walls.
- Step 1-6: Visual guide showing the process from attaching the wall plate, connecting arms to the TV, and finally mounting the TV onto the wall plate, including tilt adjustment.
Setting and Maintenance
Note: Adjust the bracket with the help of a second person.
- No screws need to be loosened for tilt adjustment.
- To secure, pull the safety cord down to put the carrying arm lever in a vertical position. To release, pull the cord sideways and upward to put the lever in a horizontal position (Fig. 4).
- Check bracket security and safety regularly (at least every three months).
- Clean with water or standard household cleaners only.
Warranty Disclaimer
Hama GmbH & Co KG assumes no liability for damage resulting from improper installation, mounting, or use, or failure to observe instructions and safety notes.
