Assembly Instruction

Parts

• Ax1: Side Frame
• Bx1: Side Frame
• Cx2: Long T Frame
• Dx2: Long T Frame
• Ex2: Short T Frame
• Fx2: Short T Frame
• Gx2: Long Frame
• Hx4: Short Frame
• Ix4: Short Shelf
• Jx3: Long Shelf
• Kx34: Short Screw
• Lx28: Screw
• Mx4: Adjustable feet pad

Assembly

Step 1: Attach frames to underside of shelves with short screws (K).

1a: Short T-frames (E & F) to short shelf (I).

Description: Attach one short T-frame (E) and one short T-frame (F) to the underside of a short shelf (I) using short screws (K). The shelf should overhang on the short side of the T-frame. [Diagram shows a short shelf (I) with two short T-frames (E and F) attached to its underside, secured by screws (K). The T-frames extend outwards from the shelf.]

Components: x 2 shelves

1b: Short straight frames (H) to short shelf (I).

Description: Attach two short straight frames (H) to the underside of a short shelf (I) using short screws (K). [Diagram shows a short shelf (I) with two short straight frames (H) attached to its underside, secured by screws (K).]

Components: x 2 shelves

1c: Long T-frames (C & D) to long shelf (J).

Description: Attach one long T-frame (C) and one long T-frame (D) to the underside of a long shelf (J) using short screws (K). [Diagram shows a long shelf (J) with two long T-frames (C and D) attached to its underside, secured by screws (K). The T-frames extend outwards from the shelf.]

Components: x 2 shelves

1d: Long straight frames (G) to long shelf (J).

Description: Attach two long straight frames (G) to the underside of a long shelf (J) using short screws (K). [Diagram shows a long shelf (J) with two long straight frames (G) attached to its underside, secured by screws (K).]

Components: x 1 shelf

Assembly Continued

Step 2: Connect shelves to each other with screws (L) to make 2 groups of shelves.

2a: Long T-frame to Short T-frame to Short Straight.

Description: Connect a long T-frame to a short T-frame, and then to a short straight frame to form a group. [Diagram illustrates connecting these three frame types in sequence.]

2b: Repeat step a, then flip the group over.

Description: Repeat the connection process from step 2a to create a second identical group. Then, flip this second group over. [Diagram shows two identical groups of connected frames, one in standard orientation (GROUP) and the other inverted (FLIPPED GROUP).]

Step 3: Attach side frames (A & B) to shelves.

Description: Attach the side frames (labeled A and B in the diagram) to the assembled shelf units. Place Group A on top, the flipped Group B in the middle, and the bottom shelf at the bottom. [Diagram shows the main shelving unit structure being built by stacking the previously formed groups and attaching side frames, securing them with screws.]

Assembly Order: Group A on top, Flipped Group B in middle, Bottom shelf on bottom.

Step 4: Once fully assembled, tighten all screws.

Description: After all components are connected, ensure all screws are fully tightened for stability. [Diagram shows the fully assembled shelving unit with arrows indicating the final tightening of all screws.]

Warning

Tipping Hazard

⚠️ WARNING: Attach the unit to the wall with the Tipping Restraint Kit hardware. Follow the instructions printed on the restraint kit's bag to install.

Serious or fatal crushing injuries can occur from furniture tipping over. To help prevent tipping:

• Avoid climbing on or hanging on the product.
• Unless specifically designed to accommodate, do not set TVs or other heavy objects on top of this product.
• Place heaviest items in the lowest position possible.
• Secure product to the wall with tipping-restraint.
• The use of tipping restraints may only reduce, not eliminate, the risk of tipping over.