Yealink DECT IP Phone W79P

W79P Package Contents

The Yealink W79P DECT IP phone consists of one W70B base station and one W59R handset.

• W59R Handset
• W70B Base Station
• 2 Power Adapters
• Battery Cover
• Rechargeable Battery
• Decorative Cover
• Charging Cradle
• Ethernet Cable
• Base Stand
• Quick Start Guide

Assembling the DECT Phone

1. Connect the base station power and the network using method a or method b.

a. AC Power Option

Description: Connect the power adapter to the base station and then to an internet source.

b. PoE (Power over Ethernet) Option

Description: Connect the base station to an IEEE 802.3af compliant PoE Hub/Switch using an Ethernet cable.

Note:

• If you choose method a, use the Yealink supplied power adapter (5V/0.6A). A third-party power adapter may damage the base station.
• If you choose method b, you do not need to connect the power adapter. Ensure the hub/switch is PoE-compliant.

2a. (Desktop Installation) Attach and remove the base stand.

Attach the Base Stand: Align the snap-fits with the corresponding holes and push forward, snapping them into the holes.

Remove the Base Stand: Remove the snap-fits from the holes horizontally.

2b. (Wall-Mount Installation) Attach the base station.

Description: Mount the base station to the wall, ensuring a 59mm spacing.

3. Insert the battery into the handset.

Description: Open the battery cover, insert the rechargeable battery, and secure the cover.

4. (Optional) Mount the charging cradle to the wall.

Description: Mount the charging cradle to the wall with 50mm spacing.

5. Connect the charging cradle and charge the handset.

Description: Connect the charging cradle to the power adapter and then to the handset. Check the charging status on the top-right corner of the LCD screen.

Note:

• Use Yealink-supplied power adapter (5V/0.6A). A third-party power adapter may damage the handset.
• Check the charging status on the top-right corner of the LCD screen.

Technical Specifications

For more information, see the specific user guide or contact your system administrator.

Hardware Component Instructions

Handset Components:

• 1 Receiver
• 2 Power LED Indicator
• 3 Phone Screen
• 4 Soft Keys
• 5 Message Key
• 6 Speakerphone Key
• 7 Navigation Keys
• 8 OK Key
• 9 On-hook Key/Power Key
• 10 Off-hook Key
• 11 Keypad
• 12 TRAN Key
• 13 Mute Key
• 14 Microphone
• 15 Speaker
• 16 Volume Key +/-
• 17 Alarm Button

Regulatory Notices

Operating Ambient Temperatures

• Operating temperature: +32 to 104°F (0 to 40°C)
• Relative humidity: 5% to 90%, non-condensing
• Storage temperature: -22 to +160°F (-30 to +70°C)

Warranty

Yealink's product warranty is limited to the unit itself, when used normally in accordance with the operating instructions and the system environment. Yealink is not liable for damage or loss resulting from the use of this product, or for any claim from a third party. Yealink is not liable for problems with Yealink devices arising from the use of this product; Yealink is not liable for financial damages, lost profits, claims from third parties, etc., arising from the use of this product.

Explanation of the symbols

• DC symbol: is the DC voltage symbol.
• WEEE Warning symbol: To avoid potential effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment, end users of electrical and electronic equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately.

Restriction of Hazardous Substances Directive (RoHS)

This device complies with the requirements of the EU RoHS Directive. Statements of compliance can be obtained by contacting support@yealink.com.

Safety Instructions

Save these instructions. Read these safety instructions before use!

General Requirements

• Before you install and use the device, read the safety instructions carefully and observe the situation during operation.
• During the process of storage, transportation, and operation, please always keep the device dry and clean, avoid collision and crash.
• Please attempt not to dismantle the device by yourself. In case of any discrepancy, please contact the appointed maintenance center for repair.
• Please refer to the relevant laws and statutes while using the device. Legal rights of others should be respected as well.

Environmental Requirements

• Place the device at a well-ventilated place. Do not expose the device under direct sunlight.
• Keep the device dry and free of dust.
• Do not place the device on or near any inflammable or fire-vulnerable object, such as rubber-made material.
• Keep the device away from any heat source or bare fire, such as a candle or an electric heater.

Operating Requirements

• Do not let a child operate the device without guidance.
• Do not let a child play with the device or any accessory in case of accidental swallowing.
• Please use the accessories provided or authorized by the manufacturer only.
• The power supply of the device shall meet the requirements of the input voltage of the device. Please use the provided surge protection power socket only.
• Before plugging or unplugging any cable, make sure that your hands are completely dry.
• Do not spill liquid of any kind on the product or use the equipment near water, for example, near a bathtub, washbowl, kitchen sink, wet basement or near a swimming pool.
• During a thunderstorm, stop using the device and disconnect it from the power supply. Unplug the power plug and the Asymmetric Digital Subscriber Line (ADSL) twisted pair (the radio frequency cable) to avoid lightning strike.
• If the device is left unused for a longer time, disconnect it from the power supply and unplug the power plug.
• When there is smoke emitted from the device, or some abnormal noise or smell, disconnect the device from the power supply, and unplug the power plug immediately. Contact the specified maintenance center for help.
• Do not insert any object into equipment slots that is not part of the product or auxiliary product.
• The cable between the unit and the Yealink device is connected incorrectly. 1. Connect the cable correctly.
• You cannot connect the cable properly. 1. You may have connected a wrong Yealink device. 2. Use the correct power supply.
• Same dust, etc., may be in the port. 1. Clean the port.
• Contact your dealer or authorized service facility for any further questions.

Battery Requirements

• Do not immerse the battery into water, which could short-circuit and damage the battery.
• Do not expose the battery to an open flame or leave the battery where it could be subjected to extremely high temperatures, which could cause the battery to explode.
• Do not power the handset off before removing the battery.
• Do not try to use the battery for the power supply of any device other than this handset.
• Do not open or mutilate the battery; reclaimed electrolyte is corrosive and may cause damage to your eyes or skin.
• Use only the rechargeable battery pack delivered with the handset or rechargeable battery packs expressly recommended by Yealink.
• Defective or exhausted battery should never be disposed of as municipal waste. Return old battery to the battery supplier, a licensed battery dealer or a designated collection facility.

Cleaning Requirements

• Before cleaning the device, disconnect it from the power supply.
• Use a piece of soft, dry and antistatic cloth to clean the device.
• Keep the power plug clean and dry.

Troubleshooting

• The unit cannot supply power to Yealink device.
• There is a bad connection with the plug. 1. Clean the plug with a dry cloth. 2. Connect it to another wall outlet.
• The usage environment is out of operating temperature range. 1. Use in the operating temperature range.
• The cable between the unit and the Yealink device is connected incorrectly. 1. Connect the cable correctly.
• You cannot connect the cable properly. 1. You may have connected a wrong Yealink device. 2. Use the correct power supply.
• Same dust, etc., may be in the port. 1. Clean the port.
• Contact your dealer or authorized service facility for any further questions.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

IC Statement

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference; and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3(B)/NMB-3(B)

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage; et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. CNR-GEN: 6.4

Radiation Exposure Statement

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Cet émetteur ne doit pas être co-placé ou ne fonctionnant en même temps qu’aucune autre antenne ou émetteur. Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur et votre corps.

About Yealink

Yealink (Stock Code: 300628) is a global brand that specializes in video conferencing, voice communications and collaboration solutions with best-in-class quality, innovative technology and user-friendly experience. As one of the best providers in more than 140 countries and regions, Yealink ranks No. 1 in the global market share of SIP phone shipments (Global IP Desktop Phone Growth Excellence Leadership Award Report, Frost & Sullivan, 2019).

Technical Support

Visit Yealink WIKI (http://support.yealink.com/) for firmware downloads, product documents, FAQ, and more. For better service, Yealink sincerely recommends you to use Yealink Ticketing system (https://ticket.yealink.com) to submit all your technical issues.

Contact Information

• YEALINK NETWORK TECHNOLOGY CO., LTD. 309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R.C.
• YEALINK (EUROPE) NETWORK TECHNOLOGY B.V. Stawirokyban 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The Netherlands
• YEALINK (USA) NETWORK TECHNOLOGY CO., LTD. 999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA

Web: www.yealink.com

Copyright©2021 YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD. All rights reserved.