Sonoff S60TPF Wi-Fi Smart Plug
User Manual V1.0
Introduction
A "safe and reliable" Wi-Fi Smart Plug with main functions such as remote control, power monitoring, and voice control. Users can check the daily/monthly power consumption on the energy overview page in the eWeLink App. Home automation can be achieved through the configuration of smart scenes, timers, schedules, etc.
- ? Remote Control
- ⏱️ Timers/Schedule
- ?️ Voice Control
- ? Device Sharing
- ✨ Smart Scene
- ⚡ Inching Mode
- ? Energy Overview
- ?️ Over-load Protection
Device Components
1. Button
- Press once: Turn on/off the smart plug.
- Press and hold for 5 seconds: Device enters the pairing mode.
2. Wi-Fi LED indicator (Blue)
- Keeps on: Device is online.
- Two short and one long flashes: Device is in pairing mode.
- Quick flash: Router not connected.
- Flash twice: Connected to the router, but not connected to the cloud.
- Flash three times: Firmware upgrade in progress.
3. Power LED indicator (Red)
- Light on: The device is on.
- Light off: The device is off.
Compatible Voice Assistants
Specification
| Feature | Details |
|---|---|
| Model | S60TPF |
| MCU | ESP32-C3 |
| Input | 250V~, 50/60Hz, 16A |
| Max. Load | 4000W |
| Wireless Connectivity | Wi-Fi IEEE 802.11 b/g/n 2.4GHz |
| Net Weight | 79g |
| Dimension | 50x50x61.5mm |
| Color | White |
| Casing Material | PC VO |
| Applicable Place | Indoor |
| Working Temperature | -10℃~40℃ |
| Working Humidity | 5%~95% RH, non-condensing |
| Certified Compliance | CE/RoHS |
Note: To ensure the safety of your electrical installation, it's essential either a Miniature Circuit Breaker (MCB) or a Residual Current Operated Circuit Breaker (RCBO) with an electrical rating of 16A has been installed before the plug.
Download the "eWeLink" App
Please download the "eWeLink" App from Google Play Store or Apple App Store.
Add Device
- Enter "Scan" in the app.
- Scan the QR code on the device.
- Select "Add Device".
- Plug in the smart plug.
- Long press the button for 5 seconds.
- Check Wi-Fi LED indicator flashing status (Two short and one long flashes).
- Search for the device and start connecting.
- Select the "Wi-Fi" network and enter the password.
- Device added completely.
EU Declaration of Conformity
Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type S60TPF is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://sonoff.tech/usermanuals
SAR Warning
Under normal use conditions, this equipment should be kept a separation distance of at least 20 cm between the antenna and the body of the user.
Dans des conditions normales d'utilisation, cet équipement doit être maintenu à une distance d'au moins 20 cm entre l'antenne et le corps de l'utilisateur.
For CE Frequency
Operation frequency Range
- BLE: 2402–2480MHz
- Wi-Fi Operation Frequency: 802.11 b/g/n20 2412–2472 MHz, 802.11 n40: 2422–2462 MHz
- RF Output Power: BLE: ≤10dBm, Wi-Fi: <20dBm
WEEE Disposal and Recycling Information
♻️ All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
sonoff.tech/usermanuals
