SONOFF S60TPG Wi-Fi Smart Plug User Manual

Introduction

The SONOFF S60TPG is a safe and reliable Wi-Fi Smart Plug offering remote control, power monitoring, and voice control capabilities. Monitor your daily/monthly power consumption via the eWeLink App. Enhance your home automation by configuring smart scenes, timers, and schedules.

Key Features

• Remote Control ?️
• Timers/Schedule ⏰
• Voice Control ?️
• Device Sharing ?
• Smart Scene ✨
• Inching Mode ⚡
• Energy Overview ?
• Over-load Protection ?️

Product Overview

Buttons and Indicators

1. Button: Press once to turn the smart plug on or off. Press and hold for 5 seconds to enter pairing mode.

2. Wi-Fi LED Indicator (Blue):

• Keeps on: Device is online.
• Two short and one long flashes: Device is in pairing mode.
• Quick flash: Router not connected.
• Flash twice: Connected to the router, but not connected to the cloud.
• Flash three times: Firmware upgrade in progress.

3. Power LED Indicator (Red):

• Light on: The device is on.
• Light off: The device is off.

Compatible Voice Assistants

This device is compatible with major voice assistants, including Google Home, Amazon Alexa, and Alice.

Specifications

Safety Note: For safe electrical installation, it is essential to have a Miniature Circuit Breaker (MCB) or a Residual Current Operated Circuit Breaker (RCBO) with an electrical rating of 13A installed before the plug.

Getting Started: Download the "eWeLink" App

Download the "eWeLink" App from the Google Play Store or Apple App Store to manage your smart plug.

Device Setup and Pairing

Follow these steps to connect your S60TPG Wi-Fi Smart Plug:

1. Open the eWeLink App. Tap the '+' icon, then tap 'Scan'.
2. Scan the QR code on the device.
3. Select 'Add Device'.
4. Plug the S60TPG smart plug into a power outlet.
5. Press and hold the button on the smart plug for 5 seconds until the Wi-Fi LED indicator flashes rapidly, indicating it is in pairing mode (typically two short and one long flashes).
6. The app will search for the device and begin connecting.
7. Select your Wi-Fi network from the list and enter the password.
8. Once connected, the device will be added successfully. You can then name your device.

Declarations and Warnings

EU Declaration of Conformity

Shenzhen Sonoff Technologies Co., Ltd. hereby declares that the radio equipment type S60TPG is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://sonoff.tech/usermanuals

SAR Warning

Under normal use conditions, this equipment should be kept at a separation distance of at least 20 cm between the antenna and the user's body. (French: Dans des conditions normales d'utilisation, cet équipement doit être maintenu à une distance d'au moins 20 cm entre l'antenne et le corps de l'utilisateur.)

Technical Information

CE Frequency Information

• Operation Frequency Range: BLE: 2402-2480MHz, Wi-Fi: 802.11 b/g/n20 2412–2472 MHz, 802.11 n40: 2422–2462 MHz.
• RF Output Power: BLE: ≤10dBm, Wi-Fi: <20dBm.

Disposal and Recycling Information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as per directive 2012/19/EU). Do not mix with unsorted household waste. Protect human health and the environment by handing over your waste equipment to a designated collection point for recycling. Correct disposal and recycling help prevent negative consequences. Contact your installer or local authorities for more information.

WEEE Symbol: ♻️

Manufacturer Information

Manufacturer: Shenzhen Sonoff Technologies Co., Ltd.

Address: 3F & 6F, Bldg A, No. 663, Bulong Rd, Shenzhen, Guangdong, China

ZIP code: 518000

Website: sonoff.tech

Service email: support@itead.cc

Made in China.

Compliance Marks: CE, WEEE Recycling Symbol ♻️, Indoor Use Symbol ?.