Victa 16" Cut and Catch Walk Behind Mower
Mfg. No: 2691904-00
Table of Contents
Deck & Catcher Group
Note: Unless noted otherwise, use the standard torque specifications.
Catcher Assembly:
- Part No: 80102754
Rear Flap Assembly:
- Part No: 80095273
- Includes Ref. Nos. 6-1, 6-2, 6-3, 6-4
| Ref No | Part No | Qty | Description |
|---|---|---|---|
| 6-1 | ---- | 1 | FLAP, Rear |
| 6-2 | ---- | 1 | SPRING, Rear Flap |
| 6-3 | ---- | 2 | RETAINING RING, E6 |
| 6-4 | ---- | 1 | ROD, Rear Flap Pivot |
| 7 | 80102767 | 1 | CHASSIS 16 IN AZTEC SILVER |
| 7-1 | ---- | 2 | BOLT, M8 x 16 |
| 7-2 | ---- | 1 | BRACKET, Lower Handle, RH |
| 7-3 | ---- | 2 | WASHER |
| 7-4 | ---- | 4 | NUT, Hex Head, Flange, M8 |
| 7-5 | ---- | 2 | NUT, Nyloc, M5 |
| 7-6 | ---- | 1 | BRACKET, Lower Handle, LH |
| 7-7 | ---- | 2 | BOLT |
| 7-8 | ---- | 1 | DECK |
| 7-9 | CH87768A | 1 | BRACKET, Height Adjustment |
| 7-10 | ---- | 2 | WASHER, 5 |
| 7-11 | ---- | 2 | BOLT, Hex, M5 x 12 |
Engine & Blade Group
Note: Unless noted otherwise, use the standard torque specifications.
| Ref No | Part No | Qty | Description |
|---|---|---|---|
| 14 | 80104746 | 1 | KIT, 3 BOLTS, Hex Flange, M8 x 25 |
| 16 | ---- | 1 | VICTA ENGINE 127CC, LTX RED (Not a Serviceable Part) |
| 17 | 80082446 | 1 | BLADE MOUNTING ASSEMBLY (Includes Ref. Nos. 17-1, 17-2, 17-3, 17-4, 17-5) |
| 17-1 | ---- | 1 | KEY, Woodruff |
| 17-2 | ---- | 1 | SLEEVE, Engine |
| 17-3 | ---- | 1 | BLADE BAR, 16" |
| 17-4 | ---- | 1 | WASHER, Blade Bar |
| 17-5 | ---- | 1 | BOLT, Blade Bar |
| 50 | CA09582A | 1 | BLADE BAR ASSEMBLY (Includes Ref. Nos. 17-3, 17-4, 17-5) |
| 17-3 | ---- | 1 | BLADE BAR, 16" (Included with Ref. No. 17-3) |
| 17-4 | ---- | 1 | WASHER, Blade Bar (Included with Ref. No. 17-3) |
| 17-5 | ---- | 1 | BOLT, Blade Bar (Included with Ref. No. 17-3) |
Footnotes:
- Note*: See Engine Service Parts for specific replacement parts or see your local distributor for suitable service replacement engine.
- Note**: Apply own Loctite with these parts.
Engine Service Parts
Note: Unless noted otherwise, use the standard torque specifications.
| Ref No | Part No | Qty | Description |
|---|---|---|---|
| 0100 | 80102156 | 1 | KIT, Engine Cover, Black |
| 0200 | 80102157 | 1 | KIT, Starter Assembly |
| 0300 | 80102158 | 1 | KIT - Cooling, Fan/Flywheel |
| 0400 | 80102159 | 1 | KIT - Ignition Assembly |
| 0500 | 80090536 | 1 | DIPSTICK, Oil |
| 0600 | 80102162 | 1 | KIT - Fuel Tank, Assembly |
| 0700 | 80103260 | 1 | Breather tube |
| 0800 | 80090539 | 1 | CAP, Fuel Tank |
| 0900 | 80102163 | 1 | KIT - Fuel Line |
| 1000 | 80102900 | 1 | KIT, Muffler Assembly |
| 1100 | 80090531 | 1 | KIT, Carburetor Assembly (Assembled) |
| 1200 | 80103261 | 1 | KIT - Prime Bulb |
| 1300 | 80090532 | 1 | KIT, Air Cleaner Assembly |
| 1400 | 80090533 | 1 | KIT, Air Filter |
| 1500 | 80090535 | 1 | FUEL FILTER |
| 1600 | 80102165 | 1 | GASKET KIT |
| 1700 | 80102166 | 1 | KIT - Linkages & Governor, Springs assembly |
Handles & Controls Group
Note: Unless noted otherwise, use the standard torque specifications.
| Ref No | Part No | Qty | Description |
|---|---|---|---|
| 2 | 80091629 | 1 | UPPER HANDLE |
| 9 | 80085865 | 1 | THROTTLE CONTROL ASSEMBLY |
| 10 | HA21621A | 1 | BOLT, Cup Head, Square Neck, M8X45 |
| 11 | ---- | 1 | WASHER, 6 (Not a serviceable part) |
| 13 | ---- | 1 | NUT, Acorn, M6 (Not a serviceable part) |
| 18 | CH87802A | 2 | HANDLE, Lower Assembly |
| 18 | 80091628 | 1 | HANDLE BOTTOM |
| 21 | PA50706A | 1 | KIT, Knobs & Fasteners (Includes Ref. Nos. 21-1, 21-2, 21-3 & 21-4) |
| 21-1 | CH88158A | 2 | KNOB -HANDLE -TRI |
| 21-2 | HA21621A | 2 | BOLT, Cup Head, Square Neck, M8X45 |
| 21-3 | ---- | 1 | CLIP, Throttle Cable (Not a serviceable part) |
| 21-4 | HA24538A | 2 | NUT, Flange Nylock, M8 |
Wheels Group
Note: Unless noted otherwise, use the standard torque specifications.
| Ref No | Part No | Qty | Description |
|---|---|---|---|
| 3 | CH87733A | 1 | FRONT AXLE ASSEMBLY (Includes Ref. Nos. 3-1, 3-2, 3-3) |
| 3-1 | ---- | 2 | BUSH, Axle |
| 3-2 | ---- | 1 | AXLE, Front |
| 3-3 | ---- | 2 | SPRING, Clip |
| 4 | 80104961 | 1 | KIT, Wheel Assembly, 165mm (Includes Ref. Nos. 4-1, 4-2, 4-3, 4-4, 4-5) |
| 4-1 | HA24039D | 1 | M8 HEX NUT |
| 4-2 | CH87290A | 1 | HUBCAP, Front |
| 4-3 | ---- | 1 | WASHER |
| 4-4 | ---- | 2 | BEARING |
| 4-5 | 80091852 | 1 | WHEEL ASSY 165MM SUMEC |
| 5 | 80085699 | 1 | REAR AXLE ASSEMBLY (Includes Ref. Nos. 5-1, 5-2, 5-3, 5-4, 5-5, 5-6) |
| 5-1 | ---- | 2 | NUT, Hex Flange, Nyloc, M5 |
| 5-2 | ---- | 4 | BOLT, Hex, M5 x 12 |
| 5-3 | ---- | 1 | AXLE, Rear |
| 5-4 | ---- | 2 | BUSH, Axle |
| 5-5 | ---- | 2 | SPRING, Clip |
| 5-6 | ---- | 1 | Height Adjustment |
| 8 | CH87770A | 1 | CONNECTING LINK ASSEMBLY (Includes Ref. Nos. 8-1, 8-2) |
| 8-1 | ---- | 2 | NUT, M6 |
| 8-2 | ---- | 1 | LINK, Connecting |
| 15 | CH87796A | 1 | SPRING, Connecting Link |
Torque Specification Chart
For Standard Metric Machine Hardware (Tolerance ± 20%)
| Property Class | Size Of Hardware | ft/lbs | Nm. | ft/lbs | Nm. | ft/lbs | Nm. | ft/lbs | Nm. |
|---|---|---|---|---|---|---|---|---|---|
| Class 5.6 | Class 5.6 | Class 8.8 | Class 8.8 | Class 10.9 | Class 10.9 | Class 12.9 | Class 12.9 | ||
| M3 | 5.88 | 0.56 | 13.44 | 1.28 | 19.2 | 1.80 | 22.92 | 2.15 | |
| M4 | 13.44 | 1.28 | 30.72 | 2.90 | 43.44 | 4.10 | 52.56 | 4.95 | |
| M5 | 26.4 | 2.50 | 60.96 | 5.75 | 5.97 | 8.10 | 7.15 | 9.7 | |
| M6 | 44.64 | 4.3 | 7.3 | 9.9 | 10.3 | 14 | 12.1 | 16.5 | |
| M7 | 5.2 | 7.1 | 12.1 | 16.5 | 16.9 | 23 | 19.9 | 27 | |
| M8 | 7.7 | 10.5 | 17.7 | 24 | 25 | 34 | 29 | 40 | |
| M10 | 15 | 21 | 35 | 48 | 50 | 67 | 59 | 81 | |
| M12 | 26 | 36 | 61 | 83 | 86.2 | 117 | 103 | 140 | |
| M14 | 42 | 58 | 101 | 132 | 136 | 185 | 162 | 220 | |
| M16 | 64 | 88 | 147 | 200 | 210 | 285 | 250 | 340 | |
| M18 | 89 | 121 | 202 | 275 | 287 | 390 | 346 | 470 | |
| M20 | 126 | 171 | 290 | 390 | 405 | 550 | 486 | 660 | |
| M22 | 169 | 230 | 390 | 530 | 559 | 745 | 656 | 890 | |
| M24 | 217 | 295 | 497 | 375 | 708 | 960 | 840 | 1140 | |
| M27 | 320 | 435 | 733 | 995 | 1032 | 1400 | 1239 | 1680 | |
| M30 | 435 | 590 | 995 | 1350 | 1401 | 1900 | 1681 | 2280 | |
| M33 | 590 | 800 | 1349 | 1830 | 1902 | 2580 | 2278 | 3090 | |
| M36 | 759 | 1030 | 1740 | 2360 | 2441 | 3310 | 2935 | 3980 | |
| M39 | 988 | 1340 | 2249 | 3050 | 3163 | 4290 | 3798 | 5150 |
For Standard Machine Hardware (Tolerance ± 20%)
| Hardware Grade | Size Of Hardware | ft/lbs | Nm. | ft/lbs | Nm. | ft/lbs | Nm. |
|---|---|---|---|---|---|---|---|
| SAE Grade 2 | SAE Grade 2 | SAE Grade 5 | SAE Grade 5 | SAE Grade 8 | SAE Grade 8 | ||
| 8-32 | 19 | 2.1 | 30 | 3.4 | 41 | 4.6 | |
| 8-36 | 20 | 2.3 | 31 | 3.5 | 43 | 4.9 | |
| 10-24 | 27 | 3.1 | 43 | 4.9 | 60 | 6.8 | |
| 10-32 | 31 | 3.5 | 49 | 5.5 | 68 | 7.7 | |
| 1/4-20 | 66 | 7.6 | 8 | 10.9 | 12 | 16.3 | |
| 1/4-28 | 76 | 8.6 | 10 | 13.6 | 14 | 19.0 | |
| 5/16-18 | 11 | 15.0 | 17 | 23.1 | 25 | 34.0 | |
| 5/16-24 | 12 | 16.3 | 19 | 25.8 | 29 | 34.0 | |
| 3/8-16 | 20 | 27.2 | 30 | 40.8 | 45 | 61.2 | |
| 3/8-24 | 23 | 31.3 | 35 | 47.6 | 50 | 68.0 | |
| 7/16-14 | 30 | 40.8 | 50 | 68.0 | 70 | 95.2 | |
| 7/16-20 | 35 | 47.6 | 55 | 74.8 | 80 | 108.8 | |
| 1/2-13 | 50 | 68.0 | 75 | 102.0 | 110 | 149.6 | |
| 1/2-20 | 55 | 74.8 | 90 | 122.4 | 120 | 163.2 | |
| 9/16-12 | 65 | 88.4 | 110 | 149.6 | 150 | 204.0 | |
| 9/16-18 | 75 | 102.0 | 120 | 163.2 | 170 | 231.2 | |
| 5/8-11 | 90 | 122.4 | 150 | 204.0 | 220 | 299.2 | |
| 5/8-18 | 100 | 136 | 180 | 244.8 | 240 | 326.4 | |
| 3/4-10 | 160 | 217.6 | 260 | 353.6 | 386 | 525.0 | |
| 3/4-16 | 180 | 244.8 | 300 | 408.0 | 420 | 571.2 | |
| 7/8-9 | 140 | 190.4 | 400 | 544.0 | 600 | 816.0 | |
| 7/8-14 | 155 | 210.8 | 440 | 598.4 | 660 | 897.6 | |
| 1-8 | 220 | 299.2 | 580 | 788.8 | 900 | 1,244.0 | |
| 1-12 | 240 | 326.4 | 640 | 870.4 | 1,000 | 1,360.0 |
Notes:
- These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews.
- Recommended seating torque values for locknuts:
- a. for prevailing torque locknuts - use 65% of grade 5 torques.
- b. for flange whizlock nuts and screws - use 135% of grade 5 torques.
- Unless otherwise noted on assembly drawings, all torque values must meet this specification.
Standard Hardware Sizing:
When a washer or nut is identified as 1/2" (M8), this is the Nominal size, meaning the inside diameter is 1/2 inch (8mm metric thread diameter); if a second number is present it represents the threads per inch (distance between threads).
When bolt or capscrew is identified as 1/2 - 16 x 2" (M8 - 1.25 x 50), this means the Nominal size, or body diameter is 1/2 inch (8mm metric thread diameter), the second number, 16, represents the threads per inch, (distance between threads). The final number is the body length of the bolt or screw, 2 inches (50mm).
Common Hardware Types:
- Hex Head Capscrew
- Washer
- Carriage Bolt
- Hex Nut
- Lockwasher
Wrench & Fastener Size Guide:
- 1/4" Bolt or Nut - Wrench: 7/16"
- M6 Bolt or Nut - Wrench: 10mm
- 5/16" Bolt or Nut - Wrench: 1/2"
- M8 Bolt or Nut - Wrench: 13mm
- 3/8" Bolt or Nut - Wrench: 9/16"
- M10 Bolt or Nut - Wrench: 17mm
- 7/16" Bolt or Nut - Wrench (Bolt): 5/8", Wrench (Nut): 11/16"
- M12 Bolt or Nut - Wrench: 19mm
- 1/2" Bolt or Nut - Wrench: 3/4"
- M14 Bolt or Nut - Wrench: 22 mm
