MAULcraft duo 820 54 LED Work Lamp
Brand: MAUL
Product Overview and Features
The MAULcraft duo 820 54 is an adjustable LED work lamp designed for precise illumination in various indoor environments. It features a robust design with an articulated arm and a clamp for secure mounting on horizontal surfaces. The lamp provides bright, efficient lighting with its dual LED modules (2 x 90 LEDs).
Key Features:
- Reach: Approximately 1.7 meters.
- Mounting: Clamp mechanism suitable for surfaces 10-63 mm thick.
- Light Source: 2 x 90 LEDs.
- Power: Operates on 220-240V~, 50Hz, with a maximum power consumption of 24W.
- Plug Type: CEE 7/16 power plug.
- Adjustability: Dimmable light output and ON/OFF control.
- Beam Angle: Half intensity angle (beam angle) of 100°.
- Electrical Protection: Class II protection, requiring no protective earth conductor due to sufficient insulation.
- Certifications: TÜV Rheinland certified, GS certified.
Intended Use
This lamp is intended for high-precision work in dry indoor areas such as homes, offices, or workshops. It is designed to operate within an ambient temperature range of -10°C to +40°C and a relative humidity of up to 95%. The luminaire is specifically designed for mounting on horizontal surfaces.
General Safety Instructions
- ? Please carefully read all included operating instructions and information.
- ⚠️ Heed all warnings indicated on the device and in the documentation.
- Use the luminaire only when it is technically sound, with full awareness of potential dangers and risks.
- For installation and use, national safety regulations must be followed.
- Install the lamp only on a suitable surface using appropriate mounting materials.
- This lamp is intended to illuminate indoor rooms and work areas only.
- Mount the luminaire exclusively in dry and closed spaces.
- Do not use the lamp in potentially explosive atmospheres, as this can lead to explosions, death, or serious injury.
- Installation, repairs, and removal of the lamp should only be performed by a qualified electrician, unless otherwise stated.
- Ensure the mains voltage matches the operating voltage and frequency specified on the nameplate.
- Damaged luminaires must not be used.
- Always disconnect the lamp from the power supply before performing any work on it.
- The luminaire must not be altered or modified.
- Do not hang anything from or attach anything to the lamp.
- Do not cover the luminaire.
- This product is not suitable for children. Do not leave children unattended with the luminaire.
- Dispose of packaging according to local regulations.
- Before cleaning or maintenance, disconnect the lamp from the power supply and allow it to cool down.
- Clean the lamp only with a dry, soft, and lint-free cloth.
- If the external flexible cable or cord is damaged, it must be replaced by the manufacturer, their service agent, or a similarly qualified person to avoid hazards.
- For replacing light sources, consult the specific operating instructions or packaging to determine if replacement must be carried out by a trained electrician or a qualified person.
Technical Symbols and Information
- [Class II Protection] Electrical Protection Class II: Sufficient insulation between live and tangible parts, no protective earth conductor required.
- ⚠️ Hazardous area, general warning.
- ?️ Dimmable.
- 100° Half intensity angle (beam angle).
- ⚡ [Electrician] Indicates work should be performed by a skilled electrician.
- ? [Observe Instructions] Indicates that instructions should be observed.
- LED Light Emitting Diode.
- CE Conforms to European Directives.
- TÜV Rheinland / GS Certified for safety and quality.
- LED LED LED light source replaceable by electrician.
- Operating device (driver) replaceable by electrician.
Manufacturer Information and Disposal
MAUL declares that these lamps conform to the relevant European Directives and product-specific directives.
Disposal: The light may not be disposed of in unsorted household rubbish. It should instead be disposed of as electrical waste at designated collection facilities. For information about available disposal options and collection facilities, contact the local city or municipal administration. ♻️ [Recycle]
License Holder: Jakob MAUL GmbH
Address: Jakob-Maul-Str. 17; D-64732 Bad König
Contact:
- Tel: +49 (0)6063/502-100
- Fax: +49 (0)6063/502-210
- E-Mail: contact@maul.de
- Website: www.maul.de
Spare Parts
The following spare parts are available:
- LED strip: Art.-No.: 8205309.200A
- Driver/Power Supply Unit: Art.-No.: 8205309.210