BROR

Assembly Overview

The assembly process for the BROR shelving unit begins with understanding the components and following sequential steps. The initial illustrations depict a person contemplating furniture parts with a question mark, followed by a person with parts approaching an IKEA store, symbolizing the start of the assembly journey.

Step 1: Attaching the First Shelf

This step involves attaching the first main shelf to the upright frame of the BROR shelving unit.

Place the shelf into the designated slots on the frame. Use four (4x) fasteners to secure the shelf in place. The diagram shows the shelf being angled and pushed down, with close-ups illustrating the insertion of fasteners into pre-drilled holes or clips.

Step 2: Attaching the Second Shelf

Repeat the process for the second main shelf.

Insert the second shelf into the frame, aligning it with the next set of supports. Secure it using four (4x) fasteners, similar to the first step. The diagram shows the shelf being lowered and secured with fasteners.

Step 3: Installing a Divider

Install a smaller divider shelf.

Position the divider shelf onto the existing structure. The diagram shows the divider being placed and an arrow indicating its direction of insertion, with a close-up showing how its edge connects to the frame.

Step 4: Installing Another Divider

Install another divider shelf.

Place the next divider shelf onto the unit. Arrows indicate the motion, and close-up views detail the connection mechanism, similar to the previous divider installation.

Step 5: Progress Update

The diagram shows the shelving unit with multiple shelves now installed, illustrating the progress of the assembly.

This visual serves as a checkpoint, showing the partially completed structure with several shelves in place.