Moen Align Two Handle Widespread Lavatory Faucet Trim

Buy it for looks. Buy it for life.^®

Specifications

There is more than 1 version of this model. Page down to identify the version you have.

DESCRIPTION

Duralock™ quick connect installation
Metal construction with various finishes identified by suffix
1/2" IPS connections

OPERATION

Lever style handles
Maximum handle rotation angle is 90° to full on for either handle
Hot side: counterclockwise to open (clockwise to close)
Cold side: clockwise to open (counterclockwise to close)
Includes hot and cold temperature indicators

FLOW

Water usage is limited to these maximum flow rates as indicated by the corresponding product markings:
1.2 gpm max (4.5 L/min) at 60 psi
(For products made before October 2008, flow is limited to 1.5 gpm max (5.7 L/min) at 60 psi, or 2.2 gpm max (8.3 L/min))

CARTRIDGE

1234™ Duralast™ cartridge (or 1224 cartridge design)
Nonmetallic, nonferrous and stainless steel material

STANDARDS

Third party certified to WaterSense®, ASME A112.18.1/CSA B125.1, and all applicable requirements referenced therein
Certified to NSF 61/9 & 372
Products marked with 1.2 gpm are compliant with California water efficiency regulations
Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
ADA compliant for lever handles

WARRANTY

Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser
5 year warranty if used in commercial installations

Models

Faucet Trim: T6193 series
Valve: 9000, 69000 (69000-Bulk Packed 6 per carton)

Installation Notes

For Faucet Trim: Designed to be installed thru 3 holes, 1-1/8" MIN. DIA.
For Deck Thickness 1-1/2" to 3": Use Service Kit #175709 (or #115001). Valves install through 1-1/4" DIA. HOLE.
Spout Installation: Installs through 1-1/8" MIN. DIA. HOLE.
Maximum Hole Diameter: 1-1/2"

Critical Dimensions (Do Not Scale)

Diagram showing various measurements for the faucet and valve installation.

Faucet Trim Dimensions:

Height: 6-13/32" (163mm)
Handle Width (center to center): 8" (203mm)
Spout Reach: 4-17/64" (108mm)
Spout Height: 4-13/16" (122mm)
Base Diameter: 2" (51mm)
Handle Height from Deck: 2-37/64" (65mm)
Handle Width: 1-29/32" (48mm)
Handle Rotation Angle: 90°
Deck Thickness: 1-1/2" (38mm) MAX

Valve Dimensions:

Center to Center (Valves): 16" (406mm)
Valve Hole Diameter: 1-1/4"
Spout Hole Diameter: 1-1/8"

Other Measurements:

1-9/16" (40mm)
2-61/64" (75mm)
1/4" (6mm)
5-9/16" (140mm)
10°
5-25/32" (140mm)

M-PACT VALVE

Widespread Lavatory Rough-in Valve

Models: 9000, 69000 (69000-Bulk Packed 6 per carton)

Quick connect system
Brass construction
1/2" IPS connections
Includes pop-up waste assembly

STANDARDS: When Trim Kit is added to M-Pact valve, the product is:

Third party certified to meet ASME A112.18.1/CSA B125.1 and all applicable requirements referenced therein including NSF61/9 & 372
Complies with California Proposition 65 and with the Federal Safe Drinking Water Act

For more information call: 1-800-BUY-MOEN

Visit: www.moen.com

Document Revision: 1/16 (or 8/15, 5/16 depending on page)

	Moen EVA Two Handle Widespread Lavatory Faucet T6420 Series Specifications Detailed specifications for the Moen EVA Two Handle Widespread Lavatory Faucet, Model T6420 series. Includes information on design, operation, flow rate, cartridge, standards, and warranty.
	Moen IVER™ M-CORE™2-Series Single-Handle Tub/Shower Trim Specifications Detailed specifications for the Moen IVER™ M-CORE™2-Series Single-Handle Tub/Shower Trim, including features, operation, flow, cartridge, standards, warranty, and model information.
	Moen COLINET™ Two-Handle Widespread Lavatory Faucet Trim Illustrated Parts Illustrated parts list for the Moen COLINET™ Two-Handle Widespread Lavatory Faucet Trim, detailing models, handles, finishes, and various kits like Lift Rod, Spout, Cross Handle, and Pop-up Plug & Seat, along with installation tools and aerator kits.
	Moen Caldwell™ Two-Handle Widespread Lavatory Faucet Illustrated Parts List Detailed illustrated parts list for the Moen Caldwell™ Two-Handle Widespread Lavatory Faucet, including model numbers, part numbers, finishes, and component descriptions.
	MOEN IVER™ TV6820 Series Two-Handle Widespread Lavatory Faucet Specifications Comprehensive specifications for the MOEN IVER™ TV6820 Series Two-Handle Widespread Lavatory Faucet. Details include product description, operation, flow rate, cartridge type, industry standards, warranty information, and installation notes. Features ADA compliance and WaterSense certification.
	Moen Hamden 4" Lavatory Faucet Illustrated Parts Detailed illustrated parts list for the Moen Hamden 4-inch Lavatory Faucet (Model 84300SRN) in Spot Resist Brushed Nickel. Includes part numbers, descriptions, waste assembly details, and deck thickness compatibility.
	Moen Caldwell Two-Handle Widespread Lavatory Faucet Specifications Detailed specifications for the Moen Caldwell two-handle widespread lavatory faucet, including features like Duralock™ installation, WaterSense® certification, ADA compliance, flow rates, and warranty information for models WS84440 and CA84440 series.
	Moen Two-Handle Widespread Lavatory Faucet Installation Guide This guide provides detailed installation instructions, parts lists, and helpful tips for the Moen Two-Handle Widespread Lavatory Faucet (Model INS12070). It covers faucet and drain assembly, connection, and flushing procedures, along with warranty information.