IMIKI MT2 True Wireless Stereo Earbuds User Manual
This manual provides comprehensive information on the IMIKI MT2 True Wireless Stereo earbuds.
Product Overview
The IMIKI MT2 earbuds are designed for a true wireless stereo experience. They feature advanced audio technology and convenient controls.
Key Components:
- Earbuds
- Charging Case
- Ambient Noise Cancellation
- Microphone Recognition
- Ear Tips
- LED Indicator
- Multifunction Touch Control
- Voice Capture Microphone
- Charging Connections
- Charging Port (USB Type-C)
[Diagram Description: A visual representation of the IMIKI MT2 earbuds and their charging case, highlighting features such as ambient noise cancellation, microphone, LED indicators, and touch controls.]
Charging
To charge your earbuds, place them inside the charging case. The LED indicators on the earbuds will illuminate red while charging and turn off when fully charged.
LED Indicator Status:
- Charging: Red light is solid.
- Charging Complete: Light is off.
- Earbud Placement: Green light illuminates for 4 seconds.
- Low Battery: Red light flashes 3 times within 1 second and then turns off. (This warning repeats once each time the earbud is worn).
- Overheating Reminder: Red light flashes 3 times every 2 seconds.
Charging Case Status:
- Charging: The red light on the case stays solid when not fully charged and turns off when fully charged.
- Earbud Charging: When earbuds are placed in the case, the case's green light illuminates for approximately 4 seconds then turns off.
- Charging Complete: The red light on the case remains solid.
- Power Interruption Reminder: Red light flashes 3 times per second and then turns off. (This warning is given once each time the earbud is worn).
[Diagram Description: Illustration showing the charging case with earbuds inserted, indicating the USB Type-C charging port and the LED indicator lights on both the earbuds and the case.]
Pairing and Resetting
Pairing
- Remove the earbuds from the charging case to power them on.
- Ensure Bluetooth is enabled on your phone.
- Search for "IMIKI MT2" on your device's Bluetooth list and select it to complete the pairing.
Resetting
- Ensure the earbuds are powered on and disconnected from any mobile device.
- Tap the touch control surface on each earbud continuously 5 times. You will see both red and white lights illuminate for 1 second.
- The earbuds will restart and re-pair with each other.
Controls and Voice Commands
The IMIKI MT2 earbuds feature intuitive touch controls for managing calls, music, and voice assistants.
| Action | Function |
|---|---|
| Single Tap | Answer/End Call, Play/Pause Music |
| Double Tap | Volume Down (Left Earbud), Volume Up (Right Earbud) |
| Triple Tap | Previous Track (Left Earbud), Next Track (Right Earbud) |
| Press and Hold (1.5 seconds) | Reject Incoming Call |
| Press and Hold (2 seconds) | Activate/Deactivate Siri (or other voice assistant) |
| Press and Hold (5 seconds, when not connected to phone) | Power Off |
Voice Command Prompts:
- "Power On"
- "Power Off"
- "Pairing"
- "Successfully Paired"
- "Disconnect"
- "Low Battery"
- "Maximum Volume"
- "Minimum Volume"
- "No Sound"
LED Indicator Descriptions
Detailed status of the LED indicators for various operational states:
| Status | Earbud Status | Charging Case Status |
|---|---|---|
| Earbud Not Paired | Red and white lights flash alternately. | N/A |
| Earbud Waiting for Phone Pairing | White light flashes. | N/A |
| Successfully Paired with Phone | Indicator light is off. | N/A |
| Power On | Red and white lights flash for one second, then the indicator turns off. | N/A |
| Power Off | Red light illuminates for approximately 1 second and then turns off. | N/A |
| Incoming Call | White light flashes twice every three seconds. | N/A |
| Charging (Earbuds) | Red light is always on. | N/A |
| Charging Complete (Earbuds) | Indicator light is off. | N/A |
| Charging (Case) | N/A | Solid red light when not fully charged, turns off when fully charged. |
| Earbud Charging in Case | N/A | Green light illuminates for ~4 seconds, then turns off. |
| Charging Complete (Case) | N/A | Red light remains solid. |
| Power Interruption Reminder | N/A | Red light flashes 3 times per second and then turns off. (Warning repeats once per earbud wear). |
Technical Specifications
| Specification | Details |
|---|---|
| Model | MT2 |
| Music Time | 4.5 Hours |
| Standby Time | 90 Days |
| Earbud Battery | [Capacity not specified in OCR] |
| BT Version | [Version not specified in OCR] |
| Waterproof Rating | [Rating not specified in OCR] |
| Charging Port | USB Type-C |
| Frequency Band | [Band not specified in OCR] |
| Max. Signal Transmission | [Details not specified in OCR] |
Precautions
- Try to use the minimum volume that allows you to hear comfortably. Prolonged exposure to high volume can cause permanent hearing damage.
- Keep earbuds and accessories out of reach of children. Children should use earbuds under adult supervision.
- Do not immerse the device in water. Do not use this product while swimming, diving, or showering.
- Do not use this product in damp, dusty, or near magnetic fields, as this may cause circuit failure.
- Do not disassemble, modify, or insert foreign objects into the device, as this may cause equipment damage.
- Do not insert your finger or other parts into the recessed position of the charging case to avoid physical injury.
- The charging case shell is metal and the edge position is thin; please avoid using it forcefully as it may cause deformation.
- Do not place the earbuds in locations with direct sunlight, such as a window or car dashboard.
- Avoid storing the earbuds in environments below 15°C (59°F) or above 50°C (122°F).
- Avoid charging the earbuds or charging case in environments below 0°C (32°F).
Disposal of Electrical and Electronic Equipment
Keep these devices separate from unsorted municipal waste. Disposal in landfills or by means of household waste bins or yellow bins is prohibited.
If products contain permanently installed batteries or accumulators, they must be removed before disposal and disposed of separately, like batteries.
The symbol of a crossed-out waste bin indicates that these devices must not be disposed of as unsorted municipal waste. As the owner of old equipment, you are responsible for returning these devices to designated collection points. Public waste disposal authorities can be used for the return or collection of old equipment, ensuring that old equipment is disposed of properly.
We wish to inform all end-users of waste electrical and electronic equipment that they are responsible for deleting personal data on the old equipment before it is disposed of.
[Symbol Description: A crossed-out wheeled bin symbol, indicating proper separate collection for WEEE (Waste Electrical and Electronic Equipment).]
Manufacturer and Compliance
Manufacturer: IMIKI Co., Ltd.
Address: [Address not provided in OCR]
IMIKI Co., Ltd. hereby declares that this device is in compliance with the essential requirements and other applicable provisions of the EU Radio Equipment Directive 2014/53/EU and the RoHS Directive 2011/65/EU.
A full Declaration of Conformity can be found on our website: [Website URL not provided in OCR]
[Compliance Mark Description: CE mark, indicating conformity with EU directives.]
