ASSEMBLY INSTRUCTION
Item No.: N719P327846, N719P327847, N719P327848
N719P327846 - COMPONENT LIST
| NO. | DRAWING | QTY | DESCRIPTION |
|---|---|---|---|
| A | A rectangular seat frame with side panels and corner leg attachment points. | 1 | Left Seat Frame |
| B | A rectangular seat frame with side panels and corner leg attachment points. | 1 | Right Seat Frame |
| C | A rectangular backrest cushion support. | 2 | Short Backrest |
| D | A flat, square seat cushion. | 2 | Seat Cushion |
| E | A rectangular back cushion. | 2 | Back Cushion |
| F | A cylindrical leg. | 12 | Round Legs |
N719P327847 - COMPONENT LIST
| NO. | DRAWING | QTY | DESCRIPTION |
|---|---|---|---|
| G | A rectangular seat frame base. | 2 | Seat Frame |
| C | A rectangular backrest cushion support. | 1 | Short Backrest |
| H | A tall, rectangular backrest support. | 2 | Long Backrest |
| D | A flat, square seat cushion. | 2 | Seat Cushion |
| E | A rectangular back cushion. | 1 | Back Cushion |
| I | A long, narrow back cushion. | 2 | Long Small Back Cushion |
| J | A square decorative pillow. | 2 | Pillow |
| F | A cylindrical leg. | 14 | Round Legs |
N719P327848 - COMPONENT LIST
| NO. | DRAWING | QTY | DESCRIPTION |
|---|---|---|---|
| G | A rectangular seat frame base. | 1 | Seat Frame |
| K | A square ottoman base. | 1 | Ottoman |
| L | A short backrest support with a visible USB port cutout. | 1 | Short Backrest have USB |
| H | A tall, rectangular backrest support. | 1 | Long Backrest |
| E | A rectangular back cushion. | 2 | Back Cushion |
| D | A flat, square seat cushion. | 2 | Seat Cushion |
| F | A cylindrical leg. | 12 | Round Legs |
| M | A long bolt. | 30 | Bolt 5/16" x 55mm |
| N | A flat, circular washer. | 32 | Flat Washer Ø8 5/16" |
| O | A hexagonal nut. | 2 | Hex Nut 5/16" |
| P | A tool resembling a wrench. | 1 | Wrench |
| Q | A tool resembling an Allen key. | 2 | Allen Key |
PARTS LIST
| NO. | DRAWING | DESCRIPTION |
|---|---|---|
| A | A rectangular seat frame with side panels and corner leg attachment points. | Left Seat Frame x 1 pc |
| B | A rectangular seat frame with side panels and corner leg attachment points. | Right Seat Frame x 1 pc |
| C | A rectangular backrest cushion support. | Short Backrest x 3 pcs |
| D | A flat, square seat cushion. | Seat Cushion x 6 pcs |
| E | A rectangular back cushion. | Back Cushion x 5 pcs |
| F | A cylindrical leg. | Round Legs x 38 pcs |
| G | A rectangular seat frame base. | Seat Frame x 3 pcs |
| H | A tall, rectangular backrest support. | Long Backrest x 3 pcs |
| I | A long, narrow back cushion. | Long Small Back Cushion x 2 pcs |
| J | A square decorative pillow. | Pillow x 2 pcs |
| K | A square ottoman base. | Ottoman x 1 pc |
| L | A short backrest support with a visible USB port cutout. | Short Backrest have USB x 1 pc |
| M | A long bolt. | Bolt 5/16" x 55mm x 30 pcs |
| N | A flat, circular washer. | Flat Washer Ø8 5/16" x 32 pcs |
| O | A hexagonal nut. | Hex Nut 5/16" x 2 pcs |
| P | A tool resembling a wrench. | Wrench x 1 pc |
| Q | A tool resembling an Allen key. | Allen Key x 2 pcs |
* Take out the following parts for N719P327848: G, K, L, H, E, D, F, M, N, O, P, Q
* Take out the following parts for N719P327846: A, B, C, D, E, F
* Take out the following parts for N719P327847: G, C, E, H, D, I, J, F
ASSEMBLY STEPS
STEP 1:
Attach 4 Round Legs (F) ? to the underside of each of the three Seat Frames (G). Use Bolts (M) ? and Washers (N) ⚪. Secure with Allen Key (Q) ?. This step is repeated for 3 frames.
STEP 2:
Insert the Long Backrest (H) into the rear slots of a Seat Frame (G). Insert the Short Backrest (L) into the side slot of the same Seat Frame (G). The backrests slot into place.
STEP 3:
Connect three Seat Frames (G) together side-by-side. Attach the Short Backrest have USB (L) to the end of the assembled frames. Secure the frames and the backrest using Bolts (M) ?, Washers (N) ⚪, and Hex Nuts (O) ⚙️. Use the Wrench (P) ? and Allen Key (Q) ? for tightening.
STEP 4:
Attach the Left Seat Frame (A) and the Right Seat Frame (B) to the ends of the assembled frames from Step 3. Attach the Short Backrests (C) to the sides of the Left Seat Frame (A) and Right Seat Frame (B). Secure using Bolts (M) ? and Washers (N) ⚪, tightened with Allen Key (Q) ?.
STEP 5:
Attach the remaining Round Legs (F) ? to the Ottoman (K), the Left Seat Frame (A), and the Right Seat Frame (B). A total of 38 Round Legs (F) ? are used for the entire unit.
STEP 6:
Push the assembled modules together to form the desired sectional sofa configuration. Arrows indicate the modules being joined.
Helpful Hints
- Move your new furniture carefully, with two people lifting and carrying the unit to its new location.
- Your furniture can be disassembled and reassembled to move.
- Clean the product with a soft damp cloth. DO NOT use harsh chemicals or abrasive cleaners.
COMPLETED
The diagram shows the placement of Seat Cushions (D), Back Cushions (E), Long Small Back Cushions (I), and Pillows (J) onto the assembled sofa frame to complete the unit. The final configuration is a fully assembled sectional sofa with cushions and pillows.
Assembly Options
OPTION 1:
The sofa is configured in a straight line with an ottoman placed to the side.
OPTION 2:
The sofa is configured into an L-shape, with the ottoman placed at the corner.
