K-Rain Drip Control Zone Kit with Pressure Regulator and Filter

Models

KP7001-FPR30-KIT

KP7001-FPR40-KIT

Features and Benefits

• Pre-assembled for quick installation
• Heavy duty, corrosion resistant for long life
• 5 year warranty

Specifications

• Pressure regulation: 30 or 40 PSI (2.1 bar; 2.8 bar)
• Flow: 0.5 - 25 GPM (1.9 - 94.6 LPM)
• Operating pressure: 10 - 120 PSI (0.7 - 8.3 bar)
• Solenoid: 24V AC
• Inlet: 1" (2.5 cm) female thread NPT
• Outlet: 1" (2.5 cm) female thread NPT
• Height: 6-1/2" (16.5 cm)
• Width: 3" (7.6 cm)
• Length: 14-1/2" (36.8 cm)

Installation

1. Install the valve on the supply line.
2. Orient the pressure-regulating filter downwards.
3. Connect one solenoid wire to the controller common and the other wire to the controller power using water-tight connectors.
4. Unscrew the cap of the pressure-regulating filter and remove the filter element.
5. Replace the cap.
6. Use the controller to activate flow. Alternatively, to operate the valve manually, turn the solenoid counter-clockwise 1/2 to 3/4 turns.
7. Run water for several minutes to flush the system.
8. Install downstream elements.

Maintenance

• Periodically remove the filter element, rinse, and reinstall.

Contact Information

K-RAIN MANUFACTURING CORP.

1640 Australian Avenue

Riviera Beach, FL 33404 USA

PH: 561.844.1002 | 1.800.735.7246

FAX: 561.842.9493

Website: www.krain.com