Midea M7 Plus Robot Vacuum Cleaner

Safety Instructions

Warning for the Machine

1. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
2. The plug must be removed from the socket-outlet before cleaning or maintaining the appliance.
3. If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.
4. WARNING: For the purposes of recharging the battery, only use the detachable docking station provided with this appliance. Use only with DC2113 docking station.
5. This appliance contains batteries that are only replaceable by skilled persons.
6. Do not bring the smart robot close to heat sources, radiation, or burning cigarette butts. It is strictly forbidden to vacuum the following objects:
   1. All liquids such as water and solvents;
   2. Lime, cement dust and other construction dust and garbage;
   3. Heat-generating objects, such as unextinguished carbon butts, cigarette butts;
   4. Sharp fragments, such as glass, etc.;
   5. Flammable and explosive items, such as gasoline and alcohol products.
7. Before using, please remove all fragile items from the ground (such as glasses, lamps, etc.), and items that may be tangled with the side brush, roller brush, and drive wheels (such as wires, curtains, and other easily-entangled materials).
8. Please pay attention to your hair and avoid entanglement on wheels or roller brushes when using, cleaning, and maintaining the robot.
9. Do not use this product at an altitude of more than 2000m.
10. Correct Disposal of this product: This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
11. Warranty Information: The manufacturer provides warranty in accordance with the legislation of the customer's own country of residence, with a minimum of 1 year (Germany: 2 years), starting from the date on which the appliance is sold to the end user. The warranty only covers defects in material or workmanship. Repairs under warranty may only be carried out by an authorized service centre. When making a claim under the warranty, the original bill of purchase (with purchase date) must be submitted. The warranty will not apply in cases of:
    • Normal wear and tear
    • Incorrect use, e.g. overloading of the appliance, use of non-approved accessories
    • Use of force, damage caused by external influences
    • Damage caused by non-observance of the user manual, e.g. connection to an unsuitable mains supply or non-compliance with the installation instructions
    • Partially or completely dismantled appliances
12. WIFI: 2400-2483.5MHz, MAX POWER: 20dBm, BLUETOOTH: MAX POWER: 10dBm. To satisfy RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance are not recommended.
13. CLASS 1 LASER PRODUCT INVISIBLE LASER RADIATION (Note: Laser classified to Class 1 according to IEC 60825-1:2014)

Warning for Docking Station

1. "IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS" and "DANGER TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS".
2. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
3. The plug must be removed from the socket-outlet before cleaning or maintaining the appliance.
4. If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.
5. Docking base is only applicable to the product M7 plus. (Battery pack type: Li-ion, DC 14.4 V, 5200 mAh). The Docking base will automatically start charging after Robot Vacuum Cleaner returned to the base.
6. Warning: The battery charger (Docking station) is not intended to charge non-rechargeable batteries.

Warning for Battery

1. Please note that do not disassemble the battery by yourself.
2. If you need to replace it, please contact the after-sales service center.
3. Please dispose of used battery according to local laws and regulations.
4. Do not dismantle, open, or shred the battery.
5. Do not expose batteries to heat or fire. Avoid storage in direct sunlight.
6. Do not short-circuit a battery.
7. Do not store batteries haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by other metal objects.
8. Do not subject batteries to mechanical shock.
9. In the event of a leaking, do not allow the liquid to come in contact with the skin or eyes. If contact occurs, wash the affected area with copious amounts of water and seek medical advice.
10. Do not use any charger other than that specifically provided for use with the equipment.
11. Do not use any battery which is not designed for use with the equipment.
12. Do not attempt to recharge batteries that are not rechargeable. Do not mix battery types or capacities within a device.
13. Keep batteries out of the reach of children.
14. Seek medical advice immediately if the battery has been swallowed.
15. Keep batteries clean and dry.
16. Do not leave a battery on prolonged charge when not in use.
17. After extended periods of storage, it may be necessary to charge and discharge the batteries several times to obtain maximum performance.
18. The batteries give their best performance when they are operated at normal room temperature (20 °C ± 5 °C).
19. Retain the original product literature for future reference.
20. The battery may be irreversibly damaged if the battery is in low power for a long time. It is recommended to charge the battery before storage.

Symbols:

• [IEC 60417-5957 (2004-12)] - For indoor use only
• [ISO 7000-0790 (2004-01)] - Read operator's manual
• [IEC 60417-5031 (2002-10)] - Direct current
• [IEC 60417-5032 (2002-10)] - Alternating current
• [IEC 60417-5172 (2003-02)] - Class II equipment
• [time-lag miniature fuse-link symbol] - Time-lag miniature fuse-link where X is the symbol for the time/current characteristic as given in IEC 60127

Technical Data

Note: You can also view the instructions on the app.

Instruction of the Product

Assembly and Parts Description

Diagram showing the robot vacuum cleaner and its components. Key parts include:

• Main Robot Unit
• Side Brushes (Left and Right)
• Brushroll (Main Cleaning Brush)
• Dustbin
• Sponge Filter
• HEPA Filter (often integrated or separate)
• Water Tank
• Mopping Pad
• Charging Docking Station
• Power Adapter
• Cleaning Tool

Diagram illustrating the underside of the robot, showing the placement of the brushroll and drive wheels.

Parts List

A detailed list of included parts, typically corresponding to a diagram.

• Robot Vacuum Cleaner (M7 plus)
• Charging Docking Station (DC2113)
• Power Adapter
• Side Brush x 2
• Brushroll x 1
• Dustbin x 1
• Filter Set (Sponge + HEPA) x 1
• Water Tank x 1
• Mopping Pad x 1
• Cleaning Tool x 1
• User Manual

Product Operation

Function Of Buttons

Diagram illustrating the top panel of the robot vacuum cleaner with control buttons:

• Power/Clean Button: Press to start or pause cleaning. Press and hold to turn the robot on/off.
• Dock/Recharge Button: Press to send the robot back to the charging dock.
• Wi-Fi Indicator Light: Shows the Wi-Fi connection status.
• Laser Navigation Sensor (LDS): Located on the top, used for mapping and navigation.

Installing The Side Brushes

Illustration showing how to attach the side brushes to the underside of the robot. Each brush is color-coded or shaped to fit a specific mounting point (Left/Right). Push the brush onto the corresponding post until it clicks into place.

Charging Robot Vacuum

Illustration showing the robot vacuum cleaner aligning with and connecting to the charging docking station. Ensure the docking station is placed against a wall with adequate clearance (0.5m on sides, 1.5m in front). Excess power cords should be neatly stored in the designated slot on the docking station.

Charging Process:

• Place the docking station in an area with good Wi-Fi reception.
• Connect the power adapter to the docking station and plug it into a wall outlet.
• Manually place the robot onto the charging contacts of the docking station or press the Dock/Recharge button.
• The robot will indicate it is charging (e.g., via voice prompt or indicator light).
• Allow the robot to fully charge before its first use (typically 4-6 hours).

Cleaning

Illustration depicting the robot vacuum cleaner operating autonomously on a floor, navigating around furniture and obstacles.

To start cleaning:

• Ensure the robot is charged and has sufficient battery.
• Press the Power/Clean button on the robot or use the MSmartHome app.
• The robot will begin its cleaning cycle, mapping the area and cleaning systematically.

Cleaning Modes:

• Whole House Cleaning: The robot cleans all accessible areas of the home.
• Room Cleaning: The robot cleans specific rooms as selected in the app.
• Zone Cleaning: The robot cleans a designated rectangular area.
• Spot Cleaning: The robot cleans a small, concentrated area intensely.

Mopping

Diagram showing the water tank being filled and attached to the robot, along with the mopping pad. The mopping function is typically activated via the app.

• Fill the water tank with clean water (do not use cleaning solutions unless specified).
• Attach the mopping pad to the designated holder.
• Attach the water tank assembly to the robot.
• Select mopping mode or a cleaning plan that includes mopping via the MSmartHome app.
• The robot will dispense water and mop the floor as it cleans.

Using APP

Illustration showing the MSmartHome app interface on a smartphone.

The MSmartHome app allows for advanced control and monitoring of the Midea M7 Plus robot vacuum cleaner. Key features include:

• Remote start, stop, and pause of cleaning.
• Scheduling cleaning sessions.
• Viewing real-time cleaning maps.
• Selecting cleaning modes (whole house, room, zone).
• Setting virtual walls and no-go zones.
• Adjusting suction power and water flow for mopping.
• Monitoring robot status, battery level, and maintenance needs.
• Receiving notifications and firmware updates.

MSmartHome App Quick Guide

This section provides a visual guide to the MSmartHome app interface.

App Interface Elements:

• Back to previous page: Navigation button.
• Cleaning time of the robot vacuum cleaner: Displays the duration of the current cleaning session.
• Cleaning area of the robot vacuum cleaner: Shows the square footage cleaned.
• Press to enter the setting page: Access to robot and app settings.
• Battery level of the robot vacuum cleaner: Indicates current battery charge.
• Map album: Stores previously generated cleaning maps.
• Cleaning mode selection: Options for Room cleaning, Whole house cleaning, Zone cleaning, Custom forbidden area.
• Press to start cleaning: Initiates the cleaning cycle.
• Press to start recharging: Sends the robot back to its charging dock.

If the Wi-Fi in your home is unstable, it may cause a certain delay in the related operations of the MSmartHome App. The content of the MSmartHome App is subject to change with product technology updates. Please refer to the MSmartHome interface for details.

Maintenance

Regular maintenance ensures optimal performance and longevity of the Midea M7 Plus.

Cleaning the Side Brush

Illustration showing the removal and cleaning of a side brush. Remove tangled hair and debris. Replace if damaged.

• Gently pull the side brush upwards to remove it.
• Remove any tangled hair or debris.
• Reinstall the side brush by pressing it onto the post until it clicks.

Cleaning the Dustbin, Sponge and Filter

Illustration showing the dustbin being removed, emptied, and the filter components being cleaned.

• Press the release button and pull out the dustbin.
• Open the dustbin lid and empty the contents into a trash bin.
• Remove the sponge filter and HEPA filter.
• The sponge filter can be rinsed with water and must be completely dry before reinsertion.
• The HEPA filter should be tapped against a trash bin to remove dust; it is generally not washable. Replace the HEPA filter periodically (e.g., every 2-3 months).
• Ensure the dustbin and filters are completely dry before reassembling.

Cleaning the Water Tank

Illustration showing the water tank being removed, emptied, and cleaned.

• Remove the water tank from the robot.
• Empty any remaining water.
• Rinse the water tank with clean water.
• Wipe the exterior dry with a soft cloth.
• Ensure the water outlet is clear of debris.

Cleaning the Sensor and Wheel

Illustration showing the location of cliff sensors, wall sensors, and the universal wheel/drive wheels. Use a soft, dry cloth to wipe these components.

• Wipe the cliff sensors (located on the underside) and other sensors (e.g., wall sensors) with a soft, dry cloth.
• Clean the drive wheels and the universal front wheel to remove any debris or hair that might impede movement.

Cleaning the Charge Terminal

Illustration showing the charging contacts on the robot and the docking station. Use a soft, dry cloth to wipe these contacts.

• Wipe the charging terminals on both the robot and the docking station with a soft, dry cloth to ensure good electrical contact.

Cleaning the Brushroll

Illustration showing the removal of the brushroll and the use of the cleaning tool to remove tangled hair and debris.

• Flip the robot over.
• Press the release tabs on the brushroll cover.
• Lift out the brushroll cover and then the brushroll.
• Use the provided cleaning tool (which typically includes a blade and a brush) to cut and remove tangled hair and debris from the brushroll.
• Clean the brushroll housing.
• Reinstall the brushroll and its cover, ensuring it clicks into place.

FAQs

Q: Why does the robot not start cleaning?
A: Ensure the robot is charged, the power button is pressed, and there are no error messages.

Q: Why does the robot not return to the charging dock?
A: Check if the dock is powered on and properly positioned. Ensure the robot's sensors are clean and there are no obstructions preventing it from reaching the dock.

Q: Why is the cleaning performance poor?
A: Check if the dustbin, filters, and brushroll are clean. Ensure the side brushes are not tangled and are installed correctly.

Q: Can the robot vacuum wet floors?
A: No, the robot is designed for dry vacuuming. The mopping function uses a damp pad, but the robot should not be used on heavily wet surfaces.

Q: How often should I clean the filters?
A: The sponge filter should be cleaned weekly, and the HEPA filter should be tapped clean weekly and replaced every 2-3 months.

Troubleshooting

In case of malfunction, please refer to the following table:

WIFI: 2400-2483.5MHz, WIFI MAX RF POWER: 20 dBm, BLUETOOTH MAX RF POWER: 10 dBm

Correct Disposal of this Product

This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.