Comica EJoy D10 PRO RGB Cardioid Dynamic Wireless Microphone User Manual

Foreword

Thanks for purchasing the Comica EJoy D10 Pro.

Main Features

Innovative Wired/Wireless modes, Single and Dual Channels Options
Cardioid Polar Pattern, Anti-noise Large Diaphragm Dynamic Mic
XLR/USB-C Digital/Analog Outputs, Wide Compatibility
48kHz/24bit Recording, Built-in Sound Card, One-key Calmix® Denoise
Support 4-level Gain Control and Step-less Monitoring Volume Adjustment
Support Real-time Monitoring and Muting
Dynamic Radiant RGB Light with 6 Optional Effects
Support 3 EQ Modes for Customized Adjustment
Battery Life Up to 45 Hours in Wireless Mode
Boom Arm and Desktop Stand Optional, Flexible Extension

Important Notices

Wired Mode (XLR Output): When outputting analog audio through the XLR port, other functions like status indicator light, EQ, gain adjustment, RGB light, and real-time monitoring are unavailable, only audio signal is delivered.

Version Compatibility: The one-channel version is not compatible with the two-channel version. The one-channel version supports stereo monitoring, while the two-channel version does not (both versions are mono output).

Computer Connection (Microphone TX): When connecting the mic to a computer, select "Comica_EJoy D10 Pro TX" as the output and input device in sound settings.

Computer Connection (Receiver RX): When connecting the receiver to a computer, select "Comica_EJoy D10 Pro RX" as the output and input device in sound settings.

Gain Adjustment: If input volume is too loud when connected to a computer, adjust the computer's "Microphone Properties-Levels" to reduce gain (Windows example shown).

Microphone Placement: Aim the microphone capsule at the sound source for optimal recording.

Environmental Precautions:

Do not use near heat sources or interference sources (e.g., radiators, ovens, refrigerators, air conditioners).
This product is a high-precision instrument; avoid falling, collision, or pounding.
Do not use in rain or damp environments to prevent short-circuiting.
Store the product in a dry environment.

Regulatory Compliance: EJoy D10 Pro has type certification according to Japan Radio Law Article 38-24(1).

Packing List

EJoy D10 Pro(D) (One-channel Version)

Microphone (TX) x1
Receiver (RX) x1
Charging/Audio Output Cable x1
Adapter x1
Desktop Mic Stand x1
User Manual x1
Warranty Card x1

EJoy D10 Pro(D) COMBO (Dual-channel Version)

Microphone (TX) x2
Receiver (RX) x1
Charging/Audio Output Cable x2
Adapter x2
Desktop Mic Stand x2
User Manual x1
Warranty Card x1

Components and Instruction

Microphone (TX)

Components:

Dynamic Mic Capsule
Microphone Sponge
RGB Light Zone
Power/Denoise Button
Status Indicator Light
Monitoring Volume Knob/Muting Button
Gain Adjustment Switch
EQ Effect Button
3.5mm Headphone Monitoring Port
XLR Port
EQ Effect Indicator Light
RGB Light Button
USB-C Port
Receiver Storage Position

Component Details:

RGB Light Zone: Offers six lighting effects: Audio dynamic, comica orange, sea wave, colorful breathing light, RGB slow wave, and rotating rainbow. The red light remains solid during muting status.
Power/Denoise Button: Long press to power the device on or off. Short press to toggle the denoise function.
Status Indicator Light:
- Denoise Status: Green light remains on.
- Muting Status: Red light remains on.
- Low Power: Red light blinks slowly.
- Charging (when powered off): Red light remains on.
- Fully Charged (when powered off): Blue light remains on.
- Unpair: Blue light blinks slowly.
- Paired: Blue light remains on.
Monitoring Volume Knob/Muting Button: Rotate the knob clockwise (towards '+') to increase headphone monitoring volume; rotate counter-clockwise (towards '-') to decrease it. Short press the button to mute/unmute audio.
Gain Adjustment Switch: Move the switch left or right to select one of four gain levels.
EQ Effect Button: Long press to turn the EQ effect on or off. Short press to cycle through three EQ effects.
EQ Effect Indicator Light:
- Bass: Orange light
- Nature: Blue light
- Bright: Green light
- Pairing: Blue light blinks quickly
RGB Light Button: Long press to turn the RGB light effect on or off. Short press to cycle through six light effects.
Pairing: To enter pairing status, simultaneously long press the EQ Effect Button and RGB Light Button.
3.5mm Headphone Monitoring Port: Connect 3.5mm TRS/TRRS headphones for real-time audio monitoring.
USB-C Port: Use the charging/audio output cable to connect to a power bank or DC power supply for charging, or connect to devices for digital audio output.
XLR Port: Connect to audio interfaces, recorders, or mixers for analog audio output using an XLR-XLR or XLR-3.5mm TRS audio cable.
Receiver Storage Position: The receiver can be stored in the designated groove on the microphone stand.

Installation and Usage

Boom Arm Kit Installation

Clamp the boom arm base onto the desktop and tighten the bottom screw clockwise to secure it.
Insert the boom arm into the base socket. Use the screws on the side of the base to fix and adjust the arm's angle.
Connect the microphone's threaded hole to the boom arm's screw, rotating clockwise to fasten.
Adjust and fix the microphone's position using the locking knob on the boom arm.

Desktop Stand Kit Installation

Connect the microphone's threaded hole to the screw of the desktop mic stand, rotating clockwise to fasten.
Adjust the microphone's angle using the locking knob on the microphone.

Usage

Wired Mode

1. Digital Output

Connect the microphone to a smartphone or computer using the audio output cable. Choose whether to monitor the audio based on your needs.

Note: When connecting to Lightning port devices, please purchase a USB C-Lightning adapter/cable that supports OTG function.

The microphone automatically turns on when connected to a device and powers off after 10 minutes of disconnection.

2. Analog Output

Connect the microphone to an audio interface, recorder, or mixer using an XLR-XLR or XLR-3.5mm TRS audio cable.

Note: When using the XLR port for analog audio output, functions like status indicator light, EQ, gain adjustment, RGB light, and real-time monitoring are unavailable, only the audio signal is transmitted.

Please purchase the appropriate XLR-XLR or XLR-3.5mm TRS audio cable separately if connecting to XLR interface devices.

The microphone automatically turns on when connected to a device and powers off after 10 minutes of disconnection.

Wireless Mode

Pairing

The microphone and receiver are paired by default. If re-pairing is necessary:

Turn on the microphone (TX). Simultaneously long press the EQ Effect Button and RGB Light Button to enter pairing status.
Connect the receiver (RX) to a device to establish a wireless connection. After successful pairing, the microphone's (TX) status indicator light will remain solid blue.

Pairing Indicator Status:

Before pairing: Status Indicator Light blinks blue slowly.
During pairing: EQ Effect Indicator Light blinks blue quickly.
After pairing: Status Indicator Light remains solid blue.

Troubleshooting: If pairing fails on some mobile phones (e.g., HUAWEI, OPPO), ensure the phone's OTG function is enabled (most phones have it enabled by default).

Usage (Connecting Receiver

Refer to the connection diagrams for connecting the receiver to various devices (smartphones, laptops, desktops).

Note: When connecting to Lightning port devices, please purchase a USB C-Lightning adapter/cable that supports OTG function.

Specifications

Transmitting Power	+10dBm
Reception Sensitivity	-97dBm
Antenna Type	Ceramic Antenna
Wireless Delay	<20ms
Type	Dynamic
Directivity	Cardioid
Microphone Sensitivity	-56dB re 1V/Pa(1.6mV @ 94dB SPL) ±2dB @ 1kHz
Frequency Range	55Hz ~ 16kHz
Maximum SPL	128dB (@ 1% THD)
Signal / Noise	72dB SPL(A-weighted, as per IEC651)
Equivalent Noise	22dB SPL(A-weighted, as per IEC651)
Dynamic Range	106dB SPL(A-weighted, as per IEC651)
Sampling Rate	48kHz
Bit Depth	Microphone Recording: 24-bit; Headphone Monitoring: 16-bit
Digital Output Interface	USB-C
Analog Output Interface	XLR 3-pin
Monitoring Interface	3.5mm TRS/TRRS
Battery Type	Lithium Polymer 930mAh 3.7V
Standby Time	RGB off: 45 hours; RGB on: 25 hours
Net Weight	Microphone Body: 228g; RX: 3.3g
Dimension	Microphone Body: Φ56mm x L160mm; RX: 32.7 x 15.5 x 7mm
Operating Temperature	0℃~+50℃
Storage Temperature	-20℃~+60℃

Contact and Support

Website: comica-audio.com

Social Media:

Facebook: Comica Audio Tech Global
Instagram: Comica Audio
YouTube: Comica Audio

Email: support@comica-audio.com

Phone: 400-8303-981

COMICA is a registered trademark owned by Commlite Tech Co., Ltd.

	Comica EJoy D10 RGB Cardioid Dynamic Microphone User Manual User manual for the Comica EJoy D10, a professional RGB cardioid dynamic microphone. Learn about its features, installation, usage, and technical specifications.
	Comica EJoy D10 PRO RGB Dynamic Wireless Microphone User Manual Comprehensive user manual for the Comica EJoy D10 PRO RGB dynamic wireless microphone, covering features, specifications, setup, and usage in wired and wireless modes.
	Comica EJoy D10 RGB Dynamic Microphone User Manual User manual for the Comica EJoy D10 RGB unidirectional dynamic microphone, detailing features, specifications, setup, and usage for both digital and analog outputs.
	COMICA STM-USB USB Condenser Cardioid Microphone User Manual Comprehensive user manual for the COMICA STM-USB, a versatile USB condenser cardioid microphone for studio quality audio, live streaming, and recording. Features include gain control, mute function, real-time monitoring, and multiple pickup patterns.
	Comica CVM-SV20 Stereo Condenser Shotgun Video Microphone User Manual User manual for the Comica CVM-SV20, a professional stereo condenser shotgun video microphone designed for cameras, camcorders, and smartphones. Features include all-aluminum construction, super anti-interference, and adjustable sensitivity.
	COMICA VM10 PRO Mini Cardioid Digital Shotgun Microphone User Manual Comprehensive user manual for the COMICA VM10 PRO, a mini cardioid digital shotgun microphone. Learn about its features, installation, and specifications for professional audio recording.
	Comica Vimo Q User Manual: Four-Channel Mini Wireless Microphone System Comprehensive user manual for the Comica Vimo Q, a four-channel mini wireless microphone system. Learn about its features, setup, operation, and specifications for professional audio recording with cameras, smartphones, and PCs.
	COMICA BoomX-D MI 2.4G Digital Dual-Channel Wireless Microphone User Manual User manual for the COMICA BoomX-D MI, a 2.4G digital dual-channel wireless microphone system. This guide covers features, components, installation, usage, pairing, and specifications for optimal audio capture.