Well Portable Bluetooth Speaker

Thank you for choosing WELL. Please read carefully the following instructions and keep them within reach.

Reorder No: SPKR-BT-EXCITE-WL

Contents

• Technical specifications
• Safety Precaution
• Panel operating instructions
• System connection
• Operation
• Vocal Fader Function
• Instructions
• Bluetooth Operation

Technical specifications

• Output Power (PMPO): 350W
• Output Power (RMS): 70W
• Driver units: 8" + 1"
• Frequency response: 40Hz - 20kHz
• S/N: ≥ 71dB
• Distortion: ≤ 0.7% (1W)
• Bluetooth function
• Support USB flashdrive
• Line-in function
• FM radio
• TWS function
• Colorful LED light
• Input power supply: 230V 50Hz
• Battery: 12V 4500mAh
• Wired microphone
• With wheels
• Size (WxLxD): 372 x 230 x 475 mm

Safety Precaution

1. Power: When working / recharging under AC power, please operate only under power indicated in the instruction or marked on device. [Diagram showing 100V-240V, 50Hz/60Hz power input]
2. Caution for Electrical Shock: To avoid electrical shock please don't use wet hands to plug in or out the power plug. Do not place in rain or near water! Vases or other vessels containing water cannot be placed on the main unit. [Diagram showing a hand plugging in a power cord with a warning symbol]
3. This device cannot bear heavy load: Avoid sunray hitting directly, and keep away from various heating sources such as stove, radiator and so on. Don't place close to the environments with much dust, high temperature, strong light and strong magnetic field etc. [Diagram showing a device under a hot sun with a warning symbol]
4. Power line protection: Prevent power line from being stepped on or pinched by heavy objects. Special attention should be paid to plug of power cord, outlets on backboard and sockets on the wall. Never pull or drag power line. [Diagram showing a power cord being pinched by a heavy object with a warning symbol]
5. Do not dismantle the casing: Serious electric shock may occur if touching internal parts carelessly. Prevent the inside of the device from opening. [Diagram showing a casing being opened with a warning symbol]
6. For safety: Switch off the main power when not in use and unplug the main cord from socket when not using it for prolonged period of time. [Diagram showing a power plug being unplugged]

Panel operating instructions

[Diagram of the speaker's control panel with numbered buttons and dials]

1. MIC jack
2. AUX in jack
3. USB port
4. Display
5. Prev: Previous song
6. Source: To switch USB/FM/AUX/Bluetooth mode
7. Pause/Play
8. Repeat: Music playback in different cycle mode
9. Next: Next song/FM channel
10. MIC.PRI
11. Master Volume: To adjust overall volume
12. TREBLE: To increase or decrease TREBLE effect in playback
13. BASS: To increase or decrease BASS effect in playback
14. ECHO: MIC Echo control
15. MIC volume control/LED light switch: To switch lighting mode

System connection

[Diagram showing connections for Power ON/OFF and AC input]

16. Power ON / OFF

17. AC in

Operation

1. Turn on the unit, connect to sound sources and play.
2. Insert USB stick to read Mp3 tracks; press SOURCE key to select USB, Bluetooth input or FM Radio, FM programs scan & save automatically.
3. When using the KARAOKE, please plug your wired microphone cable and adjust the Mic volume.

Instructions

1. When using AC power, please put the power switch at ON / AC position.
2. For using DC power, please plug DC connection cable into DC jack.
3. When recharging, the red indicator will light up; the blue indicator will light up when fully recharged.
4. For full recharging, approximately 5-6 hours will be needed.
5. Please recharge the unit only under voltage indicated in this manual or marked on the device.
6. To protect the battery, please fully recharge every time after using up.
7. To save battery power, please put the power switch in “OFF” position when finished the operation.

Bluetooth Operation

1. Turning on the power, press the "INPUT" key, switch the speaker to Bluetooth mode. Then turn on the Bluetooth function of device.
2. Search the Bluetooth device list and select the Bluetooth name " WELL EXCITE ". The speaker will sound notification tone when the connection is successful.
3. Play the music on your device by music player. The music will be transferred via Bluetooth, and sound comes out through the speaker.
4. To disconnect the Bluetooth device, the user can turn off Bluetooth function on the device, or press the "INPUT" key on the speaker panel to change the playing mode.

Waste electrical and electronic equipment are a special waste category, collection, storage, transport, treatment and recycling are important because they can avoid environmental pollution and are harmful to health. Submitting waste electrical and electronic equipment to special collection centers makes the waste to be recycled properly and protecting the environment. Do not forget! Each electric appliance that arrives at the landfill, the field, pollutes the environment! [CE logo]

Importer & distributor:

SC VITACOM ELECTRONICS SRL
CIF: RO 214527
Tel. 0264-438401*
sales@vitacom.ro, www.vitacom.ro