nVent LENTON Inlet/Outlet Plug

Product Description

Inlet and outlet plugs are installed into the grout tubes of the coupler in order to keep dirt, water, and concrete slurry out of the coupler during the concrete pour, transportation, and installation.

Features:

Designed to fit inside schedule 40 PVC pipe
Easy to install and remove

Specifications

Color: Blue

Material: Polyethylene

Table 1/1

Catalog Number	Type	Height (H)	Diameter 1 (Ø1)	Diameter 2 (Ø2)
LK502	Outlet	1/2"	0.64"	0.55"
LK501	Inlet	0.63"	0.85"

Additional Product Details

Prior to installation, please read and understand the detailed instructions and safety notices provided in the nVent LENTON Interlok Instruction Manual.

Diagrams

Diagram showing dimensions for the inlet/outlet plug. Key dimensions labeled are Ø1 and Ø2, with a height H.

Warning

nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.

Contact Information

North America: +1.800.753.9221 (Customer Care & Technical Support)

Europe (Netherlands): +31 800-0200135

Europe (France): +33 800 901 793

Europe (Germany): 800 1890272

Europe (Other Countries): +31 13 5835404

APAC (Shanghai): +86 21 2412 1618/19

APAC (Sydney): +61 2 9751 8500

Our Portfolio of Brands

nVent, CADDY, ERICO, HOFFMAN, ILSCO, SCHROFF, TRACHTE

	nVent LENTON Inlet/Outlet Plug: Features, Specifications, and Installation Guidance Detailed information on the nVent LENTON Inlet/Outlet Plug, including its features, specifications, and installation guidelines. Learn about its design for schedule 40 PVC pipe and its role in protecting grout tubes.
	nVent LENTON Interlok Grout-Filled Precast Splicing Systems \| Technical Guide A comprehensive guide to nVent LENTON Interlok Grout-Filled Precast Splicing Systems, detailing product features, applications, installation, design benefits, and specifications for advanced mechanical rebar splicing in precast concrete construction.
	nVent LENTON Swaged Terminator for Rebar Anchorage Discover the nVent LENTON Swaged Terminator, an efficient alternative to hooked rebar anchorage. This document details its advantages, applications, product performance, and specifications for concrete reinforcement.
	nVent LENTON T-Series Vertical Splice Kit, 32 mm, #10 Information on the nVent LENTON T-Series Vertical Splice Kit, including its components, features, specifications, and ordering information. This kit is designed for splicing rebar of the same diameter.
	nVent LENTON Interlok Pour Strip Replacement System Installation Guide Comprehensive guide to the nVent LENTON Interlok Pour Strip Replacement System, a reinforcing bar splicing system for segmental pours and shrinkage crack mitigation. Details installation, grouting, and troubleshooting.
	nVent LENTON Horizontal Pouring Basin, Top Fill, Extended, 48 mm dia - Product Details Detailed information on the nVent LENTON RBHA9740C Horizontal Pouring Basin, Top Fill, Extended, 48 mm dia. Features, specifications, and usage instructions for this heat-resistant graphite product.
	nVent LENTON End Alignment Fitting: Specifications and Usage Detailed information on the nVent LENTON End Alignment Fitting, including features, product attributes, and installation guidance. Covers specifications for 20 mm, #6, 20M, 2.75" dia 1, and 1.4" dia 2.
	nVent LENTON Taper-Threaded Terminators and Mechanical Anchors Discover nVent LENTON Taper-Threaded Terminators and Mechanical Anchors, offering efficient rebar anchorage solutions. Learn about their advantages over traditional hooked rebar, including simplified placement, reduced congestion, and faster installation. Explore product specifications, applications, and benefits for various construction projects.