nVent LENTON T-Series Vertical Splice Kit, 32 mm, #10

Product Number

RBT1091

Description

T-Series splice kits contain the following: Sleeve, filler material kit (filler material, packing, pouring basin ceramic insert and disk, pouring basin ceramic guide tube), pouring basin and pouring basin crucible. Splice kits are ordered based on the quantity of splices needed. Sleeves and filler material kits are one-time use parts. Pouring basins and crucibles are prorated based on their anticipated life. Ordering splice kits simplifies ordering, reduces order errors and helps ensure proper sizing of components. Kits can be ordered with longer (extended) sleeves for use when the reinforcing steel deformation pattern or spacing does not meet the minimum product specifications.

Features

Simplifies ordering
Used to splice the same diameter bars
Available with extended sleeve lengths

Product Attributes

Sleeve: Standard Length
Rebar Size, Metric: 32 mm
Rebar Size, US: #10
Length 1 (L1): 362 mm
Length 2 (L2): 51 mm
Height 1 (H1): 660mm
Height 2 (H2): 451mm
Height 3 (H3): 210mm
Height 4 (H4): 197mm
Diameter (Ø): 127 mm

Additional Product Details

Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System instruction manual. All dimensions are for reference only.

Components can also be purchased separately: (1) Sleeve, (2) Filler Material Kit (filler material, packing, pouring basin ceramic insert and disk, pouring basin ceramic guide tube), (3) Pouring Basin, and (4) Pouring Basin Crucible.

Splice Kit Components

Product Number	Filler Material	Packing (2 Required)	Pouring Basin Ceramic Insert and Disk	Pouring Basin Ceramic Guide Tube	Pouring Basin	Pouring Basin Crucible
RBT4101	RBF40	RBS354710 RBS35475	RBS5037	RBS5038	RBT5101A RBWS1500U	RBWS22774
RBT5101	RBF40	RBS354710 RBS35475	RBS5037	RBS5038	RBT5101A RBWS1500U	RBWS22774
RBT6101	RBF50	RBS35473.5 RBS35477	RBS5037	RBS5038	RBT6101A	RBWS1500X RBWS22774
RBT7101	RBF50	RBS35474 RBS35478	RBS5037	RBS5038	RBT7101A	RBWS1500A RBWS22774
RBT8101	RBF55	RBS354710 RBS35475	RBS5037	RBS5038	RBT8101A	RBWS1500C RBWS22774
RBT9101	RBF80	RBS354711 RBS35475.5	RBS5037	RBS5038	RBT9101A	RBWS1500D RBWS22774
RBT91011	RBF90	RBS354711 RBS35475.5	RBS5037	RBS5038	RBT91011A	RBWS1499D RBWS22775
RBT91012	RBF105	RBS354711 RBS35475.5	RBS5037	RBS5038	RBT91012A	RBWS1500D RBWS22775
RBT1091	RBF90	RBS354712 RBS35476	RBS5037	RBS5038	RBT1091A	RBWS1500E RBWS22775
RBT10911	RBF105	RBS354712 RBS35476	RBS5037	RBS5038	RBT10911A	RBWS1500E RBWS22775
RBT11101	RBF105	RBS354712 RBS35476	RBS5037	RBS5038	RBT11101A	RBWS1499F RBWS22775
RBT111011	RBF125	RBS354712 RBS35476	RBS5037	RBS5038	RBT111011A	RBWS1481F RBWS22776
RBT14101	RBF195	RBS354715 RBS35477	RBS5037	RBS5039	RBT14101A	RBWS1481J RBWS22776
RBT1891	RBF270	RBS354720 RBS35479	RBS5037	RBS5039	RBT1891A	RBWS1482M RBWS22777

Diagram

A diagram illustrates the dimensions of the splice kit components. It shows:

L1: Length 1
L2: Length 2
H1: Height 1
H2: Height 2
H3: Height 3
H4: Height 4
Ø: Diameter

Warning

nVent products should only be installed and used in accordance with nVent product instructions and training materials. Visit www.nvent.com for instructions, or contact your nVent customer service representative. Improper installation, misuse, abuse, or failure to fully comply with nVent instructions and warnings may void product warranties, result in property damage, cause severe personal injury, and/or death.

Contact Information

North America: +1.800.753.9221

Europe:

Netherlands: +31 800-0200135
France: +33 800 901 793

Germany: 800 1890272

Other Countries: +31 13 5835404

APAC:

Shanghai: + 86 21 2412 1618/19
Sydney: +61 2 9751 8500

Our powerful portfolio of brands:

nvent CADDY ERICO HOFFMAN ILSCO SCHROFF TRACHTE

©2025 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.

nVent.com/LENTON

	nVent LENTON B-Series Vertical Sleeve 57mm #18 55M - Product Details Detailed specifications and features for the nVent LENTON B-Series Vertical Sleeve, a 57mm rebar splicing solution designed for structural steel applications. Includes material, dimensions, compliance standards, and contact information.
	nVent LENTON T-Series Horizontal Transition Installation Equipment Guide Comprehensive guide to nVent LENTON T-Series Horizontal Transition Installation Equipment, covering features, product attributes, and installation details for rebar splicing.
	nVent LENTON Angular Pouring Basin, Top Fill, 15°, 64 mm dia - Product Information Detailed product information for the nVent LENTON Angular Pouring Basin, Top Fill, 15°, 64 mm dia. Includes features, product attributes, and installation guidance.
	nVent LENTON Crucible Extension 97 mm Dia - Product Information Discover the nVent LENTON Crucible Extension, a 97 mm diameter steel tube designed to enhance graphite crucibles. Learn about its features, product attributes, and installation guidelines.
	nVent LENTON Crucible Cover, 10.32" - Product Information Details on the nVent LENTON Crucible Cover, 10.32", including features, product attributes, and installation guidance.
	nVent LENTON Crucible Cover, 10.32" - Product Information Details on the nVent LENTON Crucible Cover, 10.32", including its features, product attributes like material and dimensions, and usage guidelines. Learn about its heat-resistant graphite construction designed to protect operators from heat and sparks.
	nVent LENTON Crucible Cover, 10.32" - Product Information Details on the nVent LENTON Crucible Cover, 10.32", including its features, product attributes, and application. Made from heat-resistant graphite, it protects operators from heat and sparks.
	nVent LENTON End Alignment Fitting: Specifications and Usage Detailed information on the nVent LENTON End Alignment Fitting, including features, product attributes, and installation guidance. Covers specifications for 20 mm, #6, 20M, 2.75" dia 1, and 1.4" dia 2.