Anviz FaceDeep 3 IRT
This document provides essential cautions and installation guidelines for the Anviz FaceDeep 3 IRT device, ensuring optimal performance and user safety.
CAUTION
Please read and follow these instructions carefully to ensure optimal performance and safety.
Temperature Measurement
- Warm up the device for at least 20 minutes after power-on to enable it to reach thermal equilibrium.
- Maintain an ambient temperature between 15°C to 32°C (59°F to 89.6°F). It is recommended to enable the "Low Temp. Access" option if the ambient temperature is below 15°C (59°F).
Installation
- Please install the device at a height of approximately 1.4 meters (55.12 inches) from the top of the device to the ground.
- Avoid backlight and direct sunlight.
Installation Diagram Description
The diagram illustrates optimal installation parameters for the device. It shows the device mounted at a height of 1.4 meters (55.12 inches) from the ground. The recommended recognition distance ranges from 1 meter (3'3") to 2 meters (6'7") from the device. The diagram also indicates a horizontal recognition range of 50cm (19.69") to 100cm (39.37"), depicting a person and a wheelchair user within these parameters.
Anviz Global Inc.
41656 Christy Street Fremont, Fremont, CA, 94538
Toll-free: 1-855-268-4948 | sales@anviz.com | www.anviz.com
©2021 Anviz Global Inc. Anviz and identifying product names and numbers herein are registered trademarks of Anviz Global Inc. All non-Anviz brands and product names are trademarks or registered trademarks of their respective companies. Product appearance, build status and/or specifications are subject to change without notice.
