Anviz FacePass 7 Pro & FacePass 7 Pro IRT

Notice and Precautions

• Do not permit oily water or sharp tools to stain or harm the display screen.
• Delicate parts are utilized in the device; please abstain from falling, crashing, bending, or heavy pressing the terminal.
• The product and display screen are designed for indoor use. Operation outside the adaptive temperature range may reduce sensitivity and performance.
• Clean the display screen and panel gently with a soft, dry cloth. Do not use water, detergent, or alcohol.
• Press the Reset button ⚙️ to restart the device if it is unresponsive or needs termination.
• The product is not waterproof; avoid allowing liquids like water, beverages, or chemicals to enter the product.
• Recommended Installation height: 120cm; Temperature Recognition distance: 30~50 cm.
• Temperature and Face Recognition Indicators: 1. Purple frame: Keep face within this area. 2. Red frame: Device has identified the face. 3. Yellow frame: Temperature recognition process. 4. Green frame: Face enrollment successful (FacePass 7 Pro IRT only).

Temperature records can be checked in the CrossChex system.

The device utilizes an AI deep learning algorithm and live infrared detection to recognize users, with notifications for users not wearing masks.

1. Components

The package includes: Terminal, Quick Guide, and Accessories.

2. Recommended Installation Environment

Before Installation:

• Operating Temperature: 0°C to 45°C
• Operating Humidity: 20-80%
• Direct sunlight can significantly impact facial recognition performance.
• Installation recommendations:
  • Do not mount the product in direct sunlight, humid, or dusty areas.
  • Ensure waterproof protection if installing outdoors.

3. Installation Procedure: Installation Position

• Recommended face recognition distance: 30-80cm (11.81-31.50 inches). Best adaptive angles are ±20° horizontally and vertically.
• Recommended installation height: 1.1m (43.31 inches). The device can recognize enrolled faces from 1.3m (51.18 inches) to 2.2m (86.61 inches). Position according to actual usage needs.

4. Installation

Sunlight and hard light can cause significant differences between the captured image and the registered image. Backlight, side-light, and strong light can influence recognition. This is due to changes in facial skin tone and potential unclear exposure areas, which may lead to incorrect identity judgment.

Recommended Installation Locations: Avoid backlight, side-light, strong light, and direct sunlight. Keep approximately 3 meters away from windows or areas influenced by sunlight.

Light Impact Diagrams:

• Diagram 1: Sunlight Shines Indoor - Illustrates light entering through a door and window, affecting visibility on walls and inside.
• Diagram 2: Sunlight Shines Through the Door, with Glass Window at One Side - Shows light paths and potential glare.
• Diagram 3: Sunlight Shines Through the Door - Depicts light entering directly through a door.

Installation Steps:

1. Place the backplate at the appropriate position and fix screws into the wall according to the mounting holes.
2. Fix the backplate and connect cables.
3. Mount the device onto the backplate.

5. Quick Guide: General Settings

Initial Setup:

1. Power on the FacePass 7 Pro and wait for activation.
2. Click the [Menu] icon, then enter the admin ID and password to access the main menu.
3. Click the [User] icon, then input employee ID and password to verify.
4. Alternatively, click the [Menu] icon, input the default ID "0" and password "12345" to enter the main menu. The admin password can be changed, or other users can be set as administrators.
5. Navigate to System Settings to set the date and time.
6. Check or edit the device ID and admin password in System Settings > Device.

Example screen displays show user login, password entry, and date/time settings.

6. User Enroll

Quick Face Registration:

Follow the on-screen prompts:

1. Click "Enroll Face" and input the user ID for registration.
2. Keep the face centered in the detection frame as requested.
3. Slightly move your head left/right and up/down during registration.
4. If the process is slow or fails, adjust the registration position.
5. If the detection frame moves erratically (e.g., due to glasses), remove glasses and try again.

Registration of Other Authentication Methods:

1. Click "User" > "Add" to input ID, Password, and Name. Then click "Register Face".
2. Click "Card" and swipe the card at the detection area to complete registration.

7. Import and Export User Data via USB Disk

To import face photos:

1. Create a folder named "Face" on a USB stick.
2. Rename face photos to match the actual user ID (e.g., 1000001.jpg).
3. Create a file named "Users.xls" in the "Face" folder and fill in personnel information.
4. Copy the "Face" folder and "Users.xls" file to the USB stick.
5. Insert the USB stick into the FacePass 7 Pro terminal.
6. Navigate: Menu → Data → Import → Data Import → Face Import → Import.

TIPS for Registration:

• Ensure the forehead and facial area below the eyebrows are visible.
• Attempt multiple angles for improved accuracy.
• Avoid changing facial expressions (e.g., smiling, grimacing).

8. Communication Setting

Ethernet Setting:

1. Click "Network" to enter the network setting page.
2. Select "Ethernet" as the WAN mode.
3. Click "Network > Comm Mode" to select server or client mode.
4. Set Ethernet parameters (IP address, Subnet mask, Gateway, DNS) based on your network environment.
5. PING the device's IP address from a management computer to confirm connectivity.

Wi-Fi Setting:

1. Click "Network" to enter the network setting page.
2. Select "Wi-Fi" as the WAN mode.
3. Click "Internet" to set DNS IP address.
4. Click "Network > Comm Mode" to select server or client mode.
5. Click "Wi-Fi" to modify TCP/IP settings.
6. Click "Choose Wi-Fi" to search for available networks, select your network, and enter the password to connect.

Matching Precision Setting

Choose from three precision levels:

• Basic: Excellent face comparison speed.
• Good: Fast face comparison speed with high security (Recommended).
• Excellent: Top security precision, recommended for high-security environments.

Access this setting via: Main Menu → Advanced → T&A → Precision.

9. Mask Recognition and Body Temperature Detection Setting

Mask Setting Page:

Navigate: Main Page → Advanced → Temperature → Mask/Temperature settings.

The mask recognition function can be adjusted in the 'Mask Setup' menu.

Mask Detection Options:

• OFF: Disables mask detection.
• Only Alarm: Notifies users without masks but allows access if registered.
• Access Control: Restricts access for users not wearing masks.

Users without masks will be reminded to wear one after settings are applied.

10. Body Temperature Detection Setting

In "Replay Output" settings, configure the relay to trigger the door for normal temperatures and activate an alarm for abnormal temperatures.

Use "TEMP. Rectify" to adjust for temperature deviations. This value is displayed on the terminal.

Switch temperature units (°C/°F) and set the fever alarm value. For example, to set an alarm for 37.3°C, input 373 (this method applies to Fahrenheit as well).

Notice: Set the check value to 10 times the usual temperature to simplify decimal calculations.

11. FacePass 7 Pro Structure

The device features dual cameras, a touch screen, restart button, power switch, USB port, card reader area, and an IR thermal camera.

12. Switching Power Supply

Diagram shows the connection of a switch power supply to the device terminals, including Wiegand inputs, door control, and relay outputs.

13. Wiring Type Access Controller

The FacePass 7 Pro, when authorized by Anviz Wiegand, can form a distributed access control system with controllers like the SC011. For more information, contact sales@anviz.com.

Diagram illustrates wiring connections for the FacePass 7 Pro with an SC011 controller, including power, door lock, exit button, and sensor connections.