Anviz FaceDeep 3 & FaceDeep 3 IRT

! Notice

• Do not use oily water or sharp objects to stain or damage the display screen.
• Fragile parts are used in the equipment; please avoid operations such as falling, crashing, bending, or heavily pressing.
• The normal working environment for the display screen and key parts of this equipment is indoors. Beyond the specified temperature range, the equipment will be less effective with reduced functionality and performance.
• Operating temperature: -10℃ ~ 50℃ (14°F ~ 122°F). Operating humidity: 20-90%.
• Please gently wipe the screen and panel with a soft cloth. Avoid scrubbing with water or detergent.
• The Face Deep terminal recommended power is DC 12V ~ 2A. When arranging wires, if the 12V power supply cable is long, resulting in large resistance, insufficient voltage (≤11V) may cause the device to restart repeatedly, leading to system crashes.
• When the ambient light changes to dark, the Face Deep 3 has a built-in filling light.

Parts List

The parts list includes:

• Terminal
• Mounting Bracket
• Quick Guide
• Accessories

Appearance Description

The device features:

• Infrared Camera
• Version Camera
• White LEDs
• Infrared Filling Light
• IR Thermal Cameras

Dimensions are approximately 146mm (5.75″) in height, 34mm (1.34″) in width, and 165mm (6.50″) in depth.

Other components include Wiring terminals, a Tamper Button, a Reset button, and a USB Interface.

Installation

Sunlight and hard light can cause significant differences between the site image and the registered image. Backlight, side-light, and strong light will influence the recognition experience. Analysis suggests that changes in facial skin color under these conditions may lead to incorrect identity recognition, and unclear exposure areas can affect identity judgment.

Recommendation: The device should be installed in locations that avoid backlight, side-light, and strong light.

Recommended Installation Placement: Keep approximately 3 meters away from windows or areas directly influenced by sunlight.

Unsuitable Conditions: Backlight, side-light, or direct strong light are not suitable for installation.

Other Areas: Install in suitable places considering the actual light impact.

Light Scenarios:

• Sunlight Shines Indoor: Illustrates light falling on a wall and door.
• Sunlight Shines Through the Door, with Glass Window at One Side: Shows light passing through a door and glass window, affecting a wall/shields.
• Sunlight Shines Through the Door: Depicts light entering through a door onto a wall/shields.

Height and Placement Recommendations

For more accurate temperature readings, hover your hand as close to the device as possible.

Installation Position Guidelines:

• Recommended Height: The distance between the lens and the ground should be approximately 1.5m (59.06″).
• Face Recognition Range: At a 1m distance, the recognizable body height range is 1.4-1.8m (55.12-70.87″). At a 1.5m distance, the range is 1m-2.2m (39.37-86.61″). (Note: Some deviations may occur).
• Temperature Detection Range: 30mm (1.18″).

Installation Steps:

1. Keep the mounting bracket parallel with the ground at a 1.2m distance from the ground. Drill 4 screw holes on the wall according to the mounting bracket template. Ensure an outlet hole of 50mm (1.97″) diameter is drilled for device wiring.
2. Punch out the tail lines from the outlet hole before installing the mounting bracket. Use the provided screws to fix the mounting bracket onto the wall. Tighten the screws following the indicated direction to complete the installation.

Access Control Power Supply

The FCARD MICROPOWER power supply controller (Model: FC-901/903) has an input of AC220/230W 50HZ and an output of DC12V, 3Amps+.

Wiring Diagram: A diagram illustrates the connection of a Door Sensor, Magnetic Lock, and Exit Button to the SC011 controller and the power supply. The SC011 controller has terminals for COM, GND, DM, 485B, 485A, GND, WIO, WI1, and 12V. The power supply has terminals for +12, GND, PUSH, NO, GND, NC.

Wiring Connection Note: SC011 and the FaceDeep 3 device are authorized by Anviz Wiegand to form a distributed access control system. For more information, please contact sales@anviz.com.

Quick Guide: General Settings

Initial Setup:

1. Power on the FaceDeep 3 and wait for activation. Access the main menu by entering the admin ID and password, or click to verify employee ID and password.
2. Enter the default ID "0" and password "12345" to access the main menu. The admin password can be changed, and other users can be set as administrators.
3. Navigate to System Settings \ Time to set the date and time.
4. Check or edit the device ID and admin password in System Settings \ Device.

Communication Settings:

1. Click "Network" to enter the network setting page and select Ethernet or Wi-Fi.
2. Click "Network \ Comm Mode" to select server or client mode.
3. Set Ethernet or Wi-Fi parameters based on your network environment.
4. Perform a PING test from a management computer to verify the device connection.

Ethernet Setting Details: Configure WAN mode (Ethernet), DNS IP address, Comm Mode, and TCP/IP settings (IP Address, Subnet mask, Gateway).

Wi-Fi Setting Details: Configure WAN mode (Wi-Fi), DNS IP address, Comm Mode, and TCP/IP settings (ESSID, Password, IP Mode, Device IP, Netmask, Gateway). The device will automatically search for available Wi-Fi networks; select one to complete the connection.

User Enrollment

Quick Face Registration:

1. Click "Enroll Face" and input the user ID for quick face registration.
2. Keep the face centered within the detection frame as prompted.
3. Slightly move the head left/right and up/down during registration. If the process is slow or fails, adjust the position. If the detection frame moves erratically (e.g., to the top), it might be due to glasses; try removing them.

Registration of Other Authentication Methods:

1. Click "User" / "Add" to input the User ID, Password, and Name. Then click "Register Face" to enroll.
2. Click "Card" and swipe the card at the card detection area to finish the registration.

TIPS for Enrollment:

• Do not cover the forehead; ensure the facial area below the eyebrows is visible during registration.
• To improve comparison accuracy, attempt registration from multiple angles. Avoid changing facial expressions (e.g., smiling, frowning, winking).

Switching Status (IN/OUT)

When a user passes face verification, their status will be updated to "IN".

To change the status: Click "IN" ➡ Choose Status ➡ Press "OUT" if needed.

To view logs of time and attendance, access the relevant menu option.

Import and Export User Data via USB Disk

To Import Face Photos:

1. Create a folder named "Face" in the root directory of your USB stick.
2. Rename face photos to match the actual User ID (e.g., 1000001.jpg) and save them in the "Face" folder.
3. Create a "Users.xls" file in the "Face" folder and fill in the personnel information (User ID, Name, Card NO., Group No., Face Image File Name).
4. Copy the "Face" folder and the "Users.xls" file to the USB disk and insert it into the FaceDeep 3 terminal.
5. Navigate: Menu ➡ Data ➡ Import ➡ Data Import ➡ Faces Import ➡ Import.

Face Photo Requirements:

• File Format: JPG image.
• Size: Maximum 500KB.
• Dimensions: Width between 100-2000 pixels, Height between 100-2000 pixels.

How to Setup Temperature

Press "Menu", then click "Advanced \ Temperature" to reset or modify temperature settings as needed.

Temperature Settings: Options include Work Mode, Relay Output, TEMP. Rectify, °C/°F Switch, and Fever Alarm.

Matching Precision Settings

There are three precision levels:

• Basic: Offers excellent face comparison speed.
• Good: Provides fast face comparison speed with high security protection (recommended).
• Excellent: Offers top security precision for high-security environments (recommended).

Access these settings via Main Menu ➡ Advanced ➡ T&A ➡ Precision.

FAQ

To protect the environment, Anviz has implemented a "CD Free" campaign since June 1st, 2019. QR codes are provided to download electronic documents for installation and usage guidance.

Download Links:

• Dropbox: https://bit.ly/2WugbYp
• Google: https://bit.ly/2Vn0wh6
• Anviz: https://bit.ly/2J9qA95

For more information, please visit www.anviz.com or email sales@anviz.com.