Aqara Full Color LED Bulb T2 (E27)
Product Introduction
The Aqara Full Color LED Bulb T2 (E27) is a smart lighting device designed for various applications. This manual provides essential information for its setup and use.
The bulb features include adjustable color temperature and brightness, allowing for customizable lighting environments. It is compatible with the Aqara Home app and can be integrated into smart home ecosystems.
Key Features:
- Model: LED Bulb T2 (E27)
- Base Type: E27
- Color: Full Color
- Connectivity: Wi-Fi, Bluetooth
- Control: Aqara Home App, Voice Assistants
- Features: Dimmable, Color Temperature Adjustable
Specifications:
| Parameter | Value |
|---|---|
| Model | LED Bulb T2 (E27) |
| Base | E27 |
| Rated Power | 9W |
| Luminous Flux | 806 lm |
| Color Temperature | 2700K - 6500K |
| Input Voltage | 100-240V~ 50/60Hz |
| Wireless Protocol | Wi-Fi IEEE 802.11 b/g/n 2.4GHz, Bluetooth 5.0 |
| Operating Temperature | -10°C to 40°C (14°F to 104°F) |
| Operating Humidity | 0% to 95% RH, no condensation |
Installation and Setup
- Ensure the power is turned off before installation.
- Screw the LED Bulb T2 into a standard E27 socket.
- Turn on the power. The bulb will flash to indicate it is ready for pairing.
- Download and install the Aqara Home app from your device's app store.
- Follow the in-app instructions to add the bulb and connect it to your Wi-Fi network.
Operation
Once paired, you can control the bulb through the Aqara Home app:
- Turn the bulb on/off.
- Adjust brightness levels.
- Change color temperature (warm to cool white).
- Set schedules and timers.
- Create scenes and automations with other Aqara devices.
Troubleshooting
Bulb not responding:
- Ensure the bulb is properly screwed into the socket and the power is on.
- Check your Wi-Fi connection.
- Try resetting the bulb by turning it on and off multiple times (refer to app for specific reset procedure).
Cannot pair with the app:
- Make sure your phone's Bluetooth is enabled.
- Ensure the bulb is within range of your Wi-Fi router.
- Restart your router and try pairing again.
Safety Information
- For indoor use only.
- Do not use with dimmers that are not compatible with LED lights.
- Do not disassemble or modify the bulb.
- Ensure proper ventilation around the bulb.
