Assembly Instructions: 5 Piece Wooden Junior Kitchen

Important Safety Information

Caution:

Adult assembly is required. Hardware contains screws with sharp points. Keep unassembled parts out of the reach of small children. Adult supervision is recommended.

Warning:

Choking hazard - small parts. Not suitable for children under 3 years.

Wall Fixing Recommendation:

Please secure this product with the supplied wall fixing. It is strongly recommended that this product is permanently fixed to the wall. Seek professional advice if you are in doubt about what fixing device to use. Regularly check the anchor is securely maintained.

Caution for Wall Fixing:

For your safety when attaching anchor fixings, please check any electrical wires or plumbing inside the wall before drilling any holes.

Hardware and Parts List

Hardware:

A: Screws (30 pcs)
B: Screws (9 pcs)
C: Screws (3 pcs)
D: Screws (29 pcs)
E: Screw (1 pc)
F: Screws (21 pcs)
G: Screws (2 pcs)
H: Screws (2 pcs)
I: Screws (4 pcs)
J: Screws (2 pcs)
K: Screws (3 pcs)
L: Screws (5 pcs)
M: Screw (1 pc)
N: Wall Fixing Part (1 pc)
O: Part (1 pc)
P: Part (2 pcs)

Parts (Referenced by Number in Diagrams):

1: Base Panel
2: Side Panel
3: Back Panel
4: Shelf/Divider Panel
5: Top Panel
6: Side Panel
7: Back Panel
8: Shelf Panel
9: Oven Door Panel
10: Side Panel
11: Back Panel
12: Side Panel
13: Shelf Panel
14: Back Panel
15: Side Panel
16: Shelf Panel
17: Drawer Front
18: Drawer Side
19: Drawer Bottom

Assembly Steps

Step 1: Identify Parts and Hardware

Familiarize yourself with all components and hardware provided. The diagrams show parts labeled with numbers (1-19) and hardware labeled with letters (A-P).

Step 2: Hardware Quantities

Review the quantities of each hardware type: A (30 pcs), B (9 pcs), C (3 pcs), D (29 pcs), E (1 pc), F (21 pcs), G (2 pcs), H (2 pcs), I (4 pcs), J (2 pcs), K (3 pcs), L (5 pcs), M (1 pc). Also note parts N (1 pc), O (1 pc), P (2 pcs).

Step 3: Assemble Base Structure

Attach side panel (2) and another side panel (6) to the base panel (1) using hardware D (multiple pieces indicated by 'Dx4' and 'Dx5'). Attach back panel (3) to the base and side panels using hardware D. Attach shelf panel (4) using hardware D.

Step 4: Add Shelving and Dividers

Attach shelf panel (4) to the structure. Attach panel (5) to the top of the side panels. Use hardware A and D as indicated.

Step 5: Continue Assembly

Attach panel (4) and panel (5) to the existing structure using hardware A and D.

Step 6: Assemble Drawer

Assemble the drawer components: drawer front (17), drawer sides (18), and drawer bottom (19). Use hardware H and D. Attach drawer runners (implied) using hardware D.

Step 7: Insert Drawer and Shelves

Insert the assembled drawer into its designated space. Place shelf panel (8) into position.

Step 8: Attach Oven Door and Panels

Attach oven door panel (9) using hardware B. Attach panels (4) and (7) using hardware D and F.

Step 9: Finalize Top and Back

Attach top panel (5) using hardware D. Attach back panel (10) using hardware D. Attach drawer front (17) using hardware L. Attach drawer sides (18) using hardware L. Attach drawer bottom (19) using hardware L. Note: Hammer is not included.

Step 10: Connect Main Units

Connect the main cabinet sections using hardware A and D.

Step 11: Secure Back Panels

Attach back panels (10, 11, 14) using hardware A.

Step 12: Attach Side Panels with Shelves

Attach side panel (12) and another side panel (15) to the main structure. Use hardware C and K. Attach shelf panel (13) using hardware C.

Step 13: Add More Shelves

Attach shelf panel (13) to the side panels (12, 15) using hardware A.

Step 14: Attach Back Panels

Attach back panel (14) using hardware A.

Step 15: Attach Side Panels

Attach side panel (15) to the structure using hardware F.

Step 16: Assemble Upper Section

Attach upper shelf panel (12) and shelf panel (14) to the side panels. Attach back panel (15) using fastener F x 2. Use hardware A for connections.

Step 17: Add Accessories and Final Checks

Attach accessories like the faucet and knobs (implied by the final product image). Ensure all parts are securely fastened using hardware B, D, F, H, I.

Step 18: Final Assembly and Wall Fixing

Complete the assembly by attaching the final panels and hardware (M). Attach the wall fixing bracket (N) to the unit and the wall as per safety instructions. Use hardware A and M.

	Wooden Ice-Cream Cart Assembly Instructions \| Kmart 43190300 Step-by-step assembly instructions for the Kmart Wooden Ice-Cream Cart (Model 43190300). Learn how to build this toy cart safely and easily.
	Kmart Passing Target Assembly Instructions Step-by-step assembly guide for the Kmart Passing Target, including a parts list and safety warnings. Key Code: 43165957.
	Wooden Limbo Game: Assembly Instructions and Rules Complete guide for the Wooden Limbo game, featuring step-by-step assembly instructions, a list of parts, safety warnings, and detailed game rules. Suitable for parties and family fun.
	Kmart Mini Blocks Flower Series: Orchid - Assembly Instructions Detailed assembly instructions and product information for the Kmart Mini Blocks Flower Series: Orchid building set (Model 43541911). Learn how to build your orchid model with clear, step-by-step guidance and safety information.
	Deluxe Double Pram Assembly Instructions and Safety Guide Comprehensive guide for assembling the Deluxe Double Pram, including safety warnings, care instructions, and a detailed part list. Suitable for use with dolls.
	Soft Play Teepee Instructions and Safety Guide Comprehensive instructions and safety warnings for the Soft Play Teepee, including assembly steps and care instructions. Suitable for indoor play.
	Balance Buckets Assembly Instructions Assembly instructions for Balance Buckets, including safety warnings and usage details. Product Keycode: 43278831.
	Assembly Instructions for 42973973 Storage Toy Box with Wheels Step-by-step assembly guide for the 42973973 Storage Toy Box with Wheels. Includes care instructions, warnings, a hardware list, and detailed instructions for putting together the toy box. Requires a Philips head screwdriver. Maximum safe load capacity is 5kg.