ASSEMBLY INSTRUCTIONS

CARE INSTRUCTIONS

Please read these instructions carefully. Ensure you have all parts before starting assembly. Place all parts on a clean and flat surface. Tool required: Philips head screwdriver (not provided).

WARNING

This package contains small parts and sharp points. Keep away from children until assembly is completed. Adult assembly required. Do not sit or stand in the box; use it for storage purpose only. Failure to follow these warnings could result in serious injury. Maximum safe load: 5kg.

Hardware list

Assembly Steps

STEP 1

This step details the hardware components and initial assembly preparation. It lists parts A (8 pieces), B (8 pieces), C (8 pieces), D (16 pieces), E (2 pieces), F (2 pieces), and H (8 pieces). It also shows three distinct components labeled (1) (2 pieces, Dx16), (2) (2 pieces, 2pc), and (3) (1 piece, 1pc). The visual demonstrates attaching wheels (part D) to the base and connecting side panels using screws.

STEP 2

Step 2 illustrates attaching the side panels (labeled 'C') to the base (labeled 'B') using screws. The diagram indicates this process is repeated twice (X2) for both sides of the toy box.

STEP 3

Step 3 shows the attachment of the front panel (labeled '1') to the assembled sides using screws (labeled 'A'). A close-up view depicts a locking mechanism for the lid, showing the 'unlock' and 'lock' positions.

STEP 4

Step 4 details the attachment of the back panel (labeled '2') to the main structure using screws (labeled 'A').

STEP 5

Step 5 shows the final assembly stages, including attaching the lid (labeled '3') and the wheels to the main body of the toy box.

STEP 6

Step 6 provides a reminder to tighten all screws (labeled 'A') securely using a screwdriver once the main assembly is complete.

STEP 7

Step 7 instructs the user to apply stickers (labeled 'H') over all visible screw holes (labeled 'C') to give the toy box a finished look.