WOODEN LIMBO

Warning

• ⚠️ CHOKING HAZARD, SMALL PARTS. Not suitable for children under 3 years.
• ?‍?‍?‍? Adult assembly required.

Part List

• Base (A x 2pcs)
• Bar (B x 1pc)
• Bar (C x 1pc)
• Dowel (D x 28pcs)
• Upper stand (E x 2pcs)
• Down stand (F x 2pcs)

Assembly Instructions

1. Screw two bars (B & C) together to make a limbo bar.
2. Screw two stands (E & F) together to form a limbo stand, and repeat it for another two stands. Then insert all the dowels (D) into the holes in each limbo stand, the dowels need to go in straight.
3. Screw the two limbo stands into the hole of each base (A), then place the limbo bar between two stands. Adjust the distance before starting.

Diagram Description: The diagram illustrates two assembled limbo stands. Each stand comprises a base (labeled F) supporting an upright stand (labeled E). A limbo bar, constructed from two bars (B and C), is suspended between the two upright stands. Dowels (D) are shown inserted vertically into the upright stands.

Game Rules

1. The aim of the game is to pass under the limbo bar at the lowest setting without touching the floor and knocking it down.
2. Players should stand in a line to play the game in turns.
3. To start the game, the limbo bar should be placed in the highest level or a desired position for all the players.
4. The limbo bar should be lowered one notch after everyone passes under the bar successfully in a turn.
5. No parts of a player may touch the bar. No parts of a player other than feet may touch the ground.
6. The player should face away from the limbo bar while passing under it. So if the bar is knocked, it will fall to the ground.
7. The winner is the player who successfully clears the lowest level in a turn.