NÄSINGE Extendable Table Assembly Instructions

General Information & Tools

Before starting assembly, ensure you have the necessary tools and a clear workspace. Protect your floor with a soft material like a rug or the packaging cardboard.

Tools Required:

• Phillips head screwdriver ?
• Flat head screwdriver ?
• Hammer ?

Important Notes:

• Handle parts with care to avoid damage.
• Assemble on a soft surface to prevent scratches.
• If you encounter issues or have questions, contact IKEA customer support.

Parts List

Identify all parts before beginning assembly. Quantities are indicated.

• 1x Assembly Tool
• 8x Threaded rod (10103587)
• 4x Wooden dowel (100712)
• 4x Cam lock housing (10103580)
• 4x Cam lock screw (10035950)
• 12x Wooden dowel (101350)
• 4x Leg bracket (107271)
• 24x Screw (100325)
• 4x Screw (109535)
• 4x Screw (108445)
• 4x Metal bracket (118331)
• 2x Table leaf support (10103587)
• 8x Nut (10033)
• 8x Washer (100843)
• 4x Table leaf glide (10120478)
• 4x Corner bracket (156685)
• 4x Foot (110912)
• 4x Screw (100033)
• 1x Locking mechanism part (10062668)
• 4x Screw (10082399)
• 2x Pin/Dowel (10064763)
• 2x Locking mechanism part (10082205)
• 2x Table leaf (112608)
• 4x Leg mounting plate (122483)

Assembly Steps

1. Step 1

   Attach leg brackets (107271) to the main frame pieces using screws (100325).

2. Step 2

   Insert cam lock housings (10103580) and cam lock screws (10035950) into the frame. Insert dowels (108445) and screws (118331).

3. Step 3

   Attach cam lock screws (10103580) and dowels (108445) to the frame.

4. Step 4

   Attach cam lock screws (156685) and dowels (101350) to the frame.

5. Step 5

   Insert wooden dowels (101350) into the ends of the table leaves (112608). Attach the table leaves to the main frame using screws (101350).

6. Step 6

   Insert wooden dowels (101350) into the frame.

7. Step 7

   Connect the frame sections. Use the cam lock system to secure them.

8. Step 8

   Attach the corner brackets (156685) using screws (100325).

9. Step 9

   Attach the locking mechanism part (10062668) with screws (10082399, 100325) and pins/dowels (10064763).

10. Step 10

    Attach the metal brackets (118331) using screws (109535).

11. Step 11

    Slide the table leaf glides (10120478) into the designated tracks.

12. Step 12

    Attach the cam lock screws (10035950) and screws (109535).

13. Step 13

    Insert the locking mechanism parts (10082205) into their positions.

14. Step 14

    Insert the locking mechanism parts (10082205) into their positions.

15. Step 15

    Attach the table leaves using screws (156685).

16. Step 16

    Attach the locking mechanisms (10064763, 10082205) with screws (10082399, 100325).

17. Step 17

    Attach the frame to the table leaves using screws (100325, 10103587) and nuts (10033, 100843).

18. Step 18

    Slide the table leaves to extend the table.

19. Step 19

    Engage the locking mechanism. You should hear a "Click!". ?

20. Step 20

    Attach the feet (110912) using screws (100033).

21. Step 21

    Attach the legs to the frame. Insert threaded rods (100712) through the frame and secure with nuts (100843) and washers (120202).

22. Step 22

    Secure the legs by tapping the leg brackets (107271) with a hammer ?.

23. Step 23

    Attach the table top to the frame using screws (100325, 109021) and cam locks (10082399, 10103587).

24. Step 24

    Attach the leg mounting plates (122483) using screws (10082399, 109021).

25. Step 25

    Attach the locking mechanisms (10064763, 10082205) with screws (10082399, 109021).

26. Step 26

    Extend the table and engage the locking mechanism. ?

27. Step 27

    Attach the table leaf support (112608).

28. Step 28

    Fold down the table leaves.

29. Step 29

    Extend the table and lock it. ? "Click!"