Huawei Y300 SIM Card Replacement
Re-installing a SIM card is very simple, follow the guide and you will do fine.
Written By: Anthony Ng
Step 1 — Rear Cover
Image 1 of 3: Hands holding the back of a Huawei Y300, highlighting a small gap at the bottom edge, suitable for prying open the rear cover. Image 2 of 3: Hands are shown using the gap at the bottom to carefully pull and detach the rear cover from the phone's frame. Image 3 of 3: The Huawei Y300 is shown with its rear cover completely removed, exposing the internal components including the battery and SIM card slot.
Remove the rear cover at the back by pulling the gap located at the bottom of the phone.
Step 2 — Battery Removal
Hands are lifting the Huawei Y300's battery upwards and out of its compartment to remove it from the phone.
Lift up and remove the battery for replacement.
Step 3 — Replace The Battery
Hands are shown holding a replacement battery next to the Huawei Y300, which is open with the original battery removed.
After the battery is removed, replace the battery.
Make sure the battery sits correctly by locating the power output at the bottom left.
Step 4 — SIM Card
Hands are shown sliding the SIM card upwards and out of its designated slot within the Huawei Y300.
- Remove the SIM card by sliding it upwards.
- The gold plate on the SIM card should face the back of the phone and the little dent sits at the bottom right.
Note: Huawei Y300 will not accept micro SIM card.
To reassemble your device, follow these instructions in reverse order.
Document generated on 2017-07-11.
Content provided by iFixit under a Creative Commons BY-NC-SA license.
