Dometic NRX Refrigerators
Models: NRX 0035, 0050, 0060, 0080 (T); NRX 0035, 0050, 0060, 0080, 0115, 0130 (E/C/S); NRX 1035, 1050, 1060, 1080, 1115, 1130 (C/S)
Models and Power Specifications
DANGER: Ensure proper installation to avoid risks.
Power Options:
- 12/24 V DC
- 100-240 V AC
Refrigerant: R134a, R1234yf
Regional Compliance:
- Europe (E/C/S)
- America (E/C/T)
- Asia, Pacific (E/C/S)
Electrical Connections:
DC Power: Requires 15 A (12 V) or 15 A (24 V) connection. [Diagram showing DC power input with red and black wires]
AC Power: 100-240 V. [Diagram showing AC power input]
Dimensions
Refer to the diagrams for specific measurements (A, B, C, D) for each model.
| Model | A (mm/in) | B (mm/in) | C (mm/in) | D (mm/in) |
|---|---|---|---|---|
| NRX0035, NRX1035 | 380/15.0 | 480/18.9 | 525/20.7 | 355/14.0 |
| NRX0050, NRX1050 | 380/15.0 | 510/20.1 | 525/20.7 | |
| NRX0050T | 380/15.0 | 510/20.1 | 533/21.0 | |
| NRX0060, NRX1060 | 448/17.6 | 537/21.1 | 525/20.7 | |
| NRX0060T | 448/17.6 | 537/21.1 | 533/21.0 | |
| NRX0080, NRX1080 | 475/18.7 | 537/21.1 | 625/24.6 | |
| NRX0080T | 475/18.7 | 537/21.1 | 633/24.9 | |
| NRX0115, NRX1115 | 525/20.7 | 568/22.4 | 745/29.3 | |
| NRX0130, NRX1130 | 525/20.7 | 568/22.4 | 812/32.0 |
Width (W) and Height (H) Dimensions:
| Model | W (mm/in) | H (mm/in) |
|---|---|---|
| NRX0035, NRX1035 | 392394/15.415.5 | 534536/21.021.1 |
| NRX0050, NRX1050 | 392394/15.415.5 | 534536/21.021.1 |
| NRX0060, NRX1060 | 460462/18.118.2 | 534536/21.021.1 |
| NRX0080, NRX1080 | 487489/19.219.3 | 634636/25.025.0 |
| NRX0115, NRX1115 | 537539/21.121.2 | 754756/29.729.8 |
| NRX0130, NRX1130 | 537539/21.221.2 | 821823/32.332.4 |
Air Flow Requirements
Insufficient air flow can shorten lifespan and reduce cooling performance. Observe minimum spacings when installing the refrigerator to furniture.
Required Spacing:
- A: ≥ 50 mm (2 in)
- B: ≥ 50 mm (2 in)
[Diagram illustrating required air gaps around the refrigerator for proper ventilation, showing front and rear clearances.]
APAC Installation Note: Ensure adequate ventilation as shown in the diagram.
AC Condensation Drain
Connect the drain hose as shown in the diagram. [Diagram showing the condensation drain connection with numbered steps.]
Installation:
- Connect the drain tube.
- Ensure proper routing for drainage.
- Route the tube to a suitable drain point.
Frame and Fixing
Frame Installation: Follow the steps in the diagram to secure the refrigerator frame. [Diagram showing frame assembly and mounting.]
Fixing: Secure the unit using the provided brackets and screws as illustrated. [Diagram showing the fixing mechanism with screws and brackets.]
Sliding Hinge Installation
Instructions for installing the sliding hinge mechanism are provided in the diagram. Ensure correct alignment and secure all components. [Diagram showing the steps for attaching and adjusting the sliding hinge.]
Reversing Door
The refrigerator door can be reversed. Follow the numbered steps in the diagram to change the door swing direction. This involves repositioning the hinges and latch. [Diagram showing the process of reversing the refrigerator door, including hinge and latch relocation.]
Hinge Options: E/C/S, T, 50T/60T, 80T configurations are shown.
Important Notices
Power Consumption: Graphs show power consumption (l/m) versus voltage (V) for 12V and 24V systems. [Diagrams illustrating power consumption curves for 12V and 24V DC operation.]
Installation Precautions:
- Avoid placing the refrigerator near heat sources. [Icon of a flame with a cross through it]
- Ensure adequate ventilation. [Icon of airflow arrows]
- Do not place heavy objects on top. [Icon of a weight with a cross through it]
- Keep the refrigerator upright during transport. [Icon of an upright arrow with a cross through it]
Temperature Control: A diagram shows the temperature adjustment dial with markings for different settings. [Diagram of a temperature control dial.]
Support | Dometic USA
