Dometic NRX Bottom Latch
Installation Instructions
This guide provides instructions for installing the bottom latch on Dometic NRX refrigerators. Please refer to the serial numbers provided to identify your version.
Version Identification
Old version:
- Serial: 51400309
- Serial: 51400310
- Serial: 51400311
New version:
- Serial: 51400312
- Serial: 51400313
- Serial: 51400314
- Serial: ...
Step 1: Preparation
WARNING: Ensure proper electrical disconnection before proceeding.
CAUTION: Ensure the vehicle is stable and secured.
Step 2: Attaching the Latch Mechanism
For Old Version:
The image shows the old version of the latch mechanism being attached to the refrigerator door.
For New Version:
The image shows the new version of the latch mechanism. Follow the subsequent steps for installation.
Step 3: Securing the Latch
The image shows the latch being positioned and secured with screws (indicated by arrows). Ensure alignment with the designated points (labeled 'A').
Step 4: Adjusting the Latch
The image illustrates how to adjust the latch for proper engagement with the refrigerator body.
Step 5: Drilling and Mounting
This step involves drilling holes of Ø3.3 mm and ensuring a depth of 3 mm for mounting the latch components.
Step 6: Final Assembly
The image shows the final attachment of the latch mechanism using M4 screws. A tool for tightening is depicted.
Important Information
Note: If you have the old version, skip step 2.
Support and Contact Information
For dealer inquiries, visit: dometic.com/dealer
For support, visit: dometic.com/contact
For sales office information, visit: dometic.com/sales-offices
A complete list of Dometic companies can be found in the public filings of DOMETIC GROUP AB, Hemvärnsgatan 15, SE-17154 Solna, Sweden.